sodcalculator

10 Tech How-To

How to Update Samsung Galaxy Core Prime to Lollipop

Guide 10-44637 · Updated · Step by step

Updating your Samsung Galaxy Core Prime to Android 5.0 Lollipop brings a refreshed Material Design interface, improved notifications, and better performance and battery life. This guide walks you through both over-the-air (OTA) and manual update methods, plus what to do if the update fails. Before you start, back up your data and ensure your phone is charged above 50%.

What You’ll Need

  • Samsung Galaxy Core Prime (SM-G360V, SM-G360T, or similar variant)
  • Stable Wi-Fi connection
  • USB cable and a computer (for manual update method)
  • Backup of your important data (contacts, photos, messages)
  • At least 1.5 GB of free internal storage

Step-by-Step

Method 1: Over-the-Air (OTA) Update

  1. Back up your data. Go to Settings > Backup and Reset > Back up my data. Also, manually copy photos and documents to an SD card or cloud service.
  2. Connect to Wi-Fi. Go to Settings > Wi-Fi and connect to a reliable network. The Lollipop update file is around 800 MB–1 GB, so avoid mobile data.
  3. Ensure sufficient battery. Plug in your charger or make sure the battery is above 50% to prevent interruption.
  4. Check for the update. Go to Settings > About Phone > Software Update > Update Now. The phone will check for available updates.
  5. Download the update. If Lollipop is available, tap “Download”. Wait for the download to complete; this may take 10–30 minutes depending on your connection.
  6. Install the update. Once downloaded, tap “Install Now”. The phone will restart and show a progress bar. Do not interrupt this process.
  7. Complete setup. After installation, the phone will boot to the new Lollipop welcome screen. Follow the on-screen prompts to finish setup.

Method 2: Manual Update via Smart Switch (Windows/Mac)

  1. Install Smart Switch. Download and install Samsung Smart Switch on your computer from the official Samsung website.
  2. Connect your phone. Use a USB cable to connect your Galaxy Core Prime to the computer. If prompted, allow USB debugging on the phone.
  3. Open Smart Switch. Launch the software. It should recognize your device automatically. If not, click “More” > “Emergency software recovery”.
  4. Check for updates. Click “Update” next to your device name. Smart Switch will check if a newer firmware (Lollipop) is available.
  5. Download and install. If an update is found, click “Install”. The software will download the firmware and install it on your phone. Keep the USB cable connected until it finishes.
  6. Disconnect safely. Once the phone restarts, you can unplug it. Complete the initial setup as usual.

Common Mistakes

  • Skipping backup: Updates can occasionally fail and wipe data. Always back up before starting.
  • Using mobile data: The update is large and may incur charges or be interrupted. Use Wi-Fi.
  • Interrupting the installation: Removing the battery or turning off the phone during the progress bar can brick the device.
  • Ignoring storage space: If the phone has less than 1.5 GB free, the update may not download. Delete unused apps or files first.
  • Using a carrier-specific firmware: If you use the manual method, ensure you download the correct firmware for your exact model and carrier. Wrong firmware can cause boot loops.

Tips

  • Charge fully: A 100% charge is safer than 50% for a long update process.
  • Keep the phone cool: Remove thick cases during installation to prevent overheating.
  • Update apps after: Some apps may need updates to work properly on Lollipop. Open Google Play Store and update all apps.
  • Factory reset if sluggish: If the phone feels slow after the update, a factory reset (after backup) can clear residual data and improve performance.
  • Check carrier availability: The OTA update is rolled out by carriers in phases. If it’s not available yet, wait a few weeks and check again.

Troubleshooting

Update not showing up

If “Update Now” says “Your device is up to date” but you know Lollipop exists, wait a few days. Carriers release updates in batches. Alternatively, try the Smart Switch method, which may detect the update earlier.

Download stuck or slow

Pause the download, restart your Wi-Fi router, and try again. If it remains stuck, cancel the download, restart the phone, and re-initiate the update.

Installation fails with an error

This often happens due to insufficient storage or a corrupted download. Free up space, then go to Settings > Storage and check available space. If the error persists, use Smart Switch to reinstall the firmware.

Phone stuck on boot loop after update

Try a soft reset: press and hold the Power button for 10–15 seconds until the phone restarts. If it still loops, boot into Recovery Mode (Power + Home + Volume Up) and select “Wipe cache partition”. Do not wipe data unless you have a backup.

Battery drains faster after update

This is normal for the first day as the system re-indexes files. If it continues, go to Settings > Battery and check which apps are using power. Restart the phone once more.

Frequently Asked Questions

Will I lose my data during the update?

Normally, OTA updates preserve your data. However, unexpected errors can cause data loss, so a backup is always recommended.

How long does the update take?

The download can take 10–30 minutes depending on your internet speed. Installation itself takes about 10–15 minutes.

Can I downgrade back to KitKat after updating?

Technically yes, but it’s not recommended. Downgrading requires flashing older firmware and will wipe your data. It may also cause instability.

Why is my carrier not offering the update?

Carriers test and approve updates for their networks. Some budget phones like the Core Prime may not get Lollipop if the carrier decides not to support it. Your only option then is the manual method, but check compatibility first.

Will Lollipop make my phone faster?

Lollipop introduces ART runtime, which can improve app performance, but on low-end hardware like the Core Prime, you may not notice a big difference. Some users report better multitasking.

What if I don’t want to update?

You can ignore the update notification. Your phone will continue to work on KitKat, but you’ll miss out on security patches and new features.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →