Losing the Apple TV remote is a common frustration, but if you have an iPhone, you can often track it down without tearing the couch apart. This guide shows you how to use the built-in Find My app on your iPhone to locate a lost Siri Remote (2nd generation or later), and what to do if your remote isn’t supported.
What You’ll Need
- An iPhone with iOS 17 or later (for the full remote-tracking features).
- The Apple TV remote must be a Siri Remote (2nd generation or later) or an Apple TV 4K remote with a USB-C port. The older aluminum remote with a white ring around the menu button is not supported.
- Your Apple TV and iPhone must be signed in to the same Apple ID.
- Bluetooth and Wi-Fi should be turned on for both devices.
Step-by-Step
- Open the Find My app on your iPhone. It’s the green app icon with a blue radar-like circle.
- Tap the Devices tab at the bottom of the screen.
- Look through the list of devices for your Apple TV remote. It will appear as “Apple TV Remote” or as the name of your Apple TV with “Remote” attached (e.g., “Living Room Remote”). If you don’t see it, make sure your Apple TV is powered on and nearby, then pull down on the list to refresh.
- Tap on the remote’s name to see its location on a map. The remote uses the same Find My network as other Apple devices, so it can show a general location even if it’s not connected to Wi-Fi.
- If the remote is nearby, tap Play Sound. The remote will emit a chirping sound that gets louder over a few seconds, making it easy to find under a cushion or behind a cabinet.
- If you’re close but still can’t find it, use the Find button (which looks like a magnifying glass with a circle). This uses the iPhone’s Ultra Wideband chip to guide you to the remote with an on-screen arrow and distance indicator. Walk in the direction of the arrow until you reach the remote.
- If the remote is not nearby, the map will show its last known location. You can tap Directions to get a route to that spot, or tap Notify When Found to get a notification when the remote comes back online.
Common Mistakes
- Assuming all remotes are trackable: Only the Siri Remote (2nd generation, released 2021) and later models have the built-in Find My support. The older white or silver aluminum remotes do not have this feature.
- Forgetting to check the Apple TV itself: If you can’t find the remote in Find My, it might be stuck between the couch cushions but still connected. Try using the Apple TV app on your iPhone as a remote to see if the Apple TV responds.
- Not updating iOS: The remote tracking features require iOS 17 or later. If you’re on an older version, the remote might not appear in Find My.
- Ignoring the “Play Sound” option: Many people only look at the map and miss the sound feature, which is the quickest way to find a remote that’s within 30 feet.
Tips
- Keep your Apple TV and remote in the same room when you first set up Find My, so the remote can establish a connection.
- If you’re in a multi-story home, the map can help you narrow down which floor the remote is on, but the Ultra Wideband feature is more precise once you’re within about 30 feet.
- Use the Control Center on your iPhone to quickly open Find My: swipe down from the top-right corner and tap the Find My icon (if you’ve added it).
- If you often lose the remote, consider attaching a small Bluetooth tracker (like an AirTag) to it, but note that the remote is too thin for most cases. Some third-party cases have a slot for an AirTag.
Troubleshooting
Remote doesn’t appear in Find My: Make sure your Apple TV is updated to tvOS 17 or later, and that the remote is charged. If it’s completely dead, it won’t show up. Also, check that the remote is paired to your Apple TV—if it’s not, it can’t be tracked.
“Play Sound” doesn’t work: The remote might be out of Bluetooth range (typically 30 feet). Move closer to where you think the remote is, or try again after a minute. If the remote is offline, the sound won’t play until it reconnects.
Ultra Wideband arrow isn’t showing: This feature requires an iPhone 11 or later (except the iPhone SE). Also, both devices need to be in the same room, and the remote must be awake (pick it up or press a button). If the arrow still doesn’t appear, restart your iPhone and try again.
Remote is completely lost and not in Find My: If the remote is unsupported or offline, your last resort is to manually search. Use a flashlight and check under furniture, inside cushions, and in laundry piles. You can also use the Apple TV app on your iPhone as a temporary remote, and consider buying a replacement.
Frequently Asked Questions
Can I find my Apple TV remote if it’s out of battery?
No. If the remote is completely dead, it won’t broadcast its location. Charge it using the Lightning or USB-C port, and it should reappear in Find My once it powers on.
Does the remote work with Find My if it’s not connected to my Apple TV?
Yes, as long as it’s paired to your Apple TV and you’re signed in with the same Apple ID, it can be tracked via the Find My network even if it’s not actively connected to the Apple TV.
Can I use my iPhone as a remote instead of the physical one?
Absolutely. The Apple TV app on your iPhone includes a built-in remote control. You can also add the Apple TV Remote to Control Center for quick access.
What if my remote is the older model?
The older Siri Remote (1st generation) and the aluminum remote do not have Find My support. You’ll need to search manually or consider upgrading to a newer model.
Will Find My work if I’m away from home?
Yes, the Find My network can show the last known location of your remote even if you’re not near it, as long as it was connected to the internet at some point. You can also get notified when it’s found.
How do I know which generation my remote is?
Check the charging port: if it’s Lightning, it’s the 1st generation (not supported). If it’s USB-C, it’s the 2nd generation or later (supported). Also, the 2nd generation has a white ring around the menu button, while the 1st generation has a black ring.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- iOS 18 Safari Not Working? Fixes That Help
- How to Check Your Linux Kernel for Spectre
- iPhone Safe Mode: How to Enable or Disable It
- Fix Slow Internet Lag on Samsung Galaxy Note
- How to Get iOS 17 on iPhone X (Safe Methods)
- Fix Gmail IMAP Error in Outlook: Step-by-Step