sodcalculator

10 Tech How-To

How to Use Face ID with a Mask on iPhone (iOS 14)

Guide 10-47340 · Updated · Step by step

With iOS 14, Apple added a way to unlock your iPhone with Face ID even when you’re wearing a mask — but it’s not a dedicated setting. Instead, you train Face ID to recognize your face with the mask on by using the “Set Up an Alternate Appearance” feature. This guide walks you through the setup, plus what to do if it doesn’t work perfectly.

What You’ll Need

  • An iPhone with Face ID (iPhone X or later, excluding the iPhone SE 2nd and 3rd gen).
  • iOS 14 or later (check in Settings > General > Software Update).
  • The mask you plan to wear — ideally the same one you’ll use daily, since the setup is specific to how the mask covers your face.

Step-by-Step

  1. Update to iOS 14 or later. Go to Settings > General  > Software Update and install any available update. This feature requires iOS 14 or newer.
  2. Open Face ID & Passcode. Go to Settings > Face ID & Passcode and enter your passcode.
  3. Choose “Set Up an Alternate Appearance.” Scroll down and tap this option. It’s normally used for a second face, but here we’ll use it for your masked face.
  4. Position your face. Hold your iPhone at eye level, about an arm’s length away, and make sure your face is fully inside the frame.
  5. Put on your mask. Now put on the mask you’ll wear most often. Make sure it covers your nose and mouth as it normally would.
  6. Move your head in a circle. Slowly rotate your head to complete the circular scan. The iPhone will capture multiple angles of your masked face.
  7. Complete the second scan. The first pass finishes, then it asks for a second scan. Repeat the same circular motion with the mask still on.
  8. Done. Once both scans are complete, tap “Done.” Your iPhone will now recognize you with the mask on.

Common Mistakes

  • Using a different mask than the one you set up. The alternate appearance is tuned to the exact shape and coverage of the mask you wore during setup. Switching to a different style (e.g., from a surgical mask to a cloth one) may cause recognition to fail.
  • Holding the phone too close or too far. Face ID works best at a distance of 10–20 inches (25–50 cm). Too close or too far can break the scan.
  • Not covering your nose. If you wear the mask below your nose during setup, Face ID will learn that look — and it won’t match when you pull it up properly.
  • Rushing the head rotation. The scan needs to see your face from multiple angles. Moving too fast or stopping early can cause a failed scan.
  • Forgetting to update iOS. The alternate appearance method works only on iOS 14 or later. On older versions, you’ll see no such option.

Tips

  • Use the same mask consistently. If you alternate between a few masks, set up a separate alternate appearance for each one (you can have up to two alternate appearances total, including the primary face).
  • Set up while in good lighting. Natural, even light helps the TrueDepth camera capture more detail.
  • Keep your eyes open. Face ID requires eye contact unless you’ve disabled “Require Attention for Face ID.” If you wear sunglasses, you may need to take them off or enable the accessibility option.
  • If it fails repeatedly, try a different mask. Some masks with thick fabric or patterns can confuse the sensor. A simpler, solid-color mask often works better.
  • Use the passcode as a backup. Even with the alternate appearance, Face ID may occasionally fail. Your passcode always works, so keep it memorable.

Troubleshooting

Face ID doesn’t recognize you with the mask on after setup. First, make sure you’re wearing the exact same mask as during setup. If you are, try resetting the alternate appearance: go to Settings > Face ID & Passcode, enter your passcode, tap “Reset Alternate Appearance,” and then set it up again, this time ensuring the mask is positioned identically and the lighting is good.

You see “Face ID is not available” or a message to enter your passcode. This can happen after a restart or if Face ID has failed too many times. Enter your passcode once, then try again. If the problem persists, check that nothing is covering the TrueDepth camera (the notch area) — a screen protector or dirt can block it.

Face ID works without the mask but not with it. The alternate appearance is separate from your primary appearance. If it’s not working, delete the alternate appearance and redo it, making sure to follow the on-screen instructions exactly.

You can’t find the “Set Up an Alternate Appearance” option. This means your iPhone is running iOS 13 or earlier. Update to iOS 14 or later. If you’re already on iOS 14 and the option is missing, your iPhone may not support Face ID (e.g., iPhone SE 2nd gen uses Touch ID).

Face ID works but is slow or requires multiple attempts. Try repositioning the phone so your eyes are level with the sensor, and make sure the mask isn’t covering your eyes. Also, check that “Require Attention for Face ID” is off if you often have your eyes closed or wear glasses that reflect light.

Frequently Asked Questions

Does this work with any mask?

Most masks work, but the setup is specific to the mask you wear during the scan. If you switch masks, recognition may fail. For best results, use a simple, solid-color mask that fits snugly.

Can I use this with sunglasses?

Yes, if you disable “Require Attention for Face ID” in Settings > Face ID & Passcode. Otherwise, Face ID needs to see your eyes. Some sunglasses with infrared-blocking coatings may still cause issues.

Will this compromise security?

The alternate appearance is stored securely on the device, just like your primary appearance. It doesn’t lower security; it simply adds another representation of your face. However, a mask reduces the amount of facial data, so the match threshold is slightly less strict — but still secure enough for most users.

Can I set up more than one alternate appearance?

No. You can have one primary appearance and one alternate appearance. If you want to use multiple masks, you’ll need to reset the alternate appearance each time you switch.

Why does Face ID sometimes work with a mask even without this setup?

If the mask is very small (like a chin strap) or you have distinctive features visible, Face ID might still match your primary appearance. But it’s unreliable — the alternate appearance method is the official workaround.

Does this work on all iPhones with Face ID?

Yes, any iPhone with Face ID (X, XS, XR, 11, 12, 13, 14, etc.) running iOS 14 or later supports this. The feature is part of the operating system, not specific hardware.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →