sodcalculator

10 Tech How-To

Google Docs Landscape: Change Page Orientation

Guide 10-44836 · Updated · Step by step

This guide shows you how to switch a Google Docs document from the default portrait orientation to landscape, which gives you a wider page for spreadsheets, timelines, certificates, and images. You can change the orientation for the entire document or for just selected sections, and the process takes less than a minute once you know where the setting lives.

What You’ll Need

  • A Google account (free) and access to Google Docs
  • A document open in Google Docs, either one you created or one you can edit
  • If you want only part of the document in landscape, you will also need to know where your section breaks are (or be ready to insert them)

Step-by-Step

Change the Whole Document to Landscape

  1. Open the document in Google Docs at docs.google.com.
  2. Click File in the top-left menu.
  3. Select Page setup from the dropdown menu.
  4. In the dialog box that appears, look for the Orientation section.
  5. Click the Landscape radio button (the circle next to the word Landscape).
  6. Optional: Adjust the margins if you want more or less white space. The default is 1 inch on all sides, which is fine for most documents.
  7. Click OK at the bottom of the dialog. The entire document will immediately switch to landscape orientation.

Change Only Part of the Document to Landscape

If you need just one page or a few pages in landscape while the rest stays portrait, you must use section breaks. Google Docs does not let you rotate a single page without them.

  1. Place your cursor at the very beginning of the text that should start the landscape section.
  2. Click Insert in the top menu.
  3. Hover over Break and choose Section break (next page). This creates a new section starting on a fresh page.
  4. Scroll to the end of the content that should be landscape. Place your cursor right after the last word of that section.
  5. Again click Insert > Break > Section break (next page). Now you have three sections: portrait, landscape, portrait.
  6. Click anywhere inside the middle section (the one you want to be landscape).
  7. Go to File > Page setup.
  8. Choose Landscape.
  9. In the Apply to dropdown, select This section instead of the default “Whole document.”
  10. Click OK. Only the middle section will rotate; the sections before and after it will stay portrait.

Change the Default for All Future Documents

  1. Follow steps 1-5 above to open Page setup and select Landscape.
  2. Before clicking OK, click the blue text that says Set as default.
  3. Click OK. Every new document you create will now start in landscape orientation until you change this setting again.

Common Mistakes

  • Using page breaks instead of section breaks: If you insert a regular page break (Insert > Break > Page break), the orientation change will still apply to the whole document. Only section breaks allow different orientations in different parts of the file.
  • Forgetting to set “Apply to” to “This section”: When you have multiple sections and open Page setup, the dialog defaults to “Whole document.” If you do not change this to “This section,” you will rotate everything, undoing your careful section setup.
  • Clicking outside the target section: The cursor must be physically inside the section you want to rotate. If you click in the first section and then choose “This section,” you will rotate the wrong part of the document.
  • Expecting the change to affect only one page: Landscape applies to an entire section, not to a single page. If you want only one landscape page, that page must be its own section, meaning you need a section break before it and after it.
  • Confusing orientation with page size: Orientation (portrait/landscape) is different from paper size (Letter, A4, Legal). Changing orientation does not change the paper size; it just swaps the width and height.

Tips

  • For tables, charts, and wide images, landscape often works better. If you have a large spreadsheet or a timeline, consider rotating just that section rather than the whole document.
  • Check your headers and footers after switching to landscape. Page numbers and running headers may look different because the page is wider, and you may need to adjust their position or alignment.
  • When printing a landscape document, verify that your printer settings match. In the print dialog (Ctrl+P or Cmd+P), look for a “Paper size” or “Orientation” setting and confirm it says Landscape. Some printers auto-detect, but not all do.
  • Use the “Set as default” option only if you regularly create wide documents. If you change it back to portrait later, remember that the default only affects new documents, not existing ones.
  • If you are collaborating, note that orientation changes apply to everyone viewing the document. There is no per-user view setting for orientation.

Troubleshooting

The whole document changed even though I only wanted one section.
You likely used a page break instead of a section break, or you forgot to select “This section” in the Apply to dropdown. Undo the change (Ctrl+Z or Cmd+Z), then re-insert section breaks at the correct locations and try again.

I see a blank page after inserting a section break.
This is normal. Section breaks force a new page, so you may have an empty page if the break lands at the end of your content. Delete the extra blank page by placing your cursor at the top of it and pressing Backspace, or by removing the section break itself if it is no longer needed.

The landscape section looks fine on screen but prints wrong.
Open the print dialog and check the orientation setting there. Also confirm that your printer driver is set to accept the paper size you are using. If you are using a custom paper size, make sure it is selected in both Google Docs Page setup and the printer settings.

I cannot find the Page setup option.
Make sure you are in a Google Docs document, not in Google Sheets or Slides. In Sheets, page orientation is under File > Print > Layout. In Slides, orientation is set under File > Page setup. The steps in this guide apply only to Google Docs.

My section breaks disappeared or moved.
If you copy and paste large blocks of text, section breaks can sometimes be lost. Re-insert them after pasting. Also, if you delete a section break, the content before it takes on the formatting of the section after it, so be careful when removing breaks.

Frequently Asked Questions

Can I have one landscape page in the middle of a portrait document?
Yes, but that one page must be its own section. Insert a section break before and after that page, then set that section to landscape.

Does changing to landscape affect the page count?
Usually yes. Landscape pages hold less vertical content, so text that fit on one portrait page may spill onto two landscape pages. The total page count often increases.

Can I change orientation on the mobile app?
As of now, the Google Docs mobile app does not have a direct Page setup menu. You can open the document in a mobile browser and request the desktop site, or make the change on a computer.

Will my collaborators see the landscape change immediately?
Yes. Orientation is a document-level setting, so everyone with edit or view access sees the same layout.

Can I mix portrait and landscape page sizes, like A4 portrait and A4 landscape?
Yes, as long as you use section breaks. Each section can have its own orientation and its own margins, though the paper size is typically the same for the whole document.

What is the difference between “This section” and “Whole document” in Apply to?
“Whole document” changes every page in the file. “This section” changes only the section where your cursor is currently placed, leaving other sections untouched. You must have at least one section break for “This section” to be meaningful.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →