sodcalculator

10 Tech How-To

SmartThings App: Control Devices and Rooms

Guide 10-57424 · Updated · Step by step

This guide shows you how to use the SmartThings app to control your smart home devices and organize them into rooms. You’ll learn how to add devices, group them by room, and use the app’s main controls to turn things on or off, adjust settings, and create automations.

What You’ll Need

  • A smartphone or tablet with the SmartThings app installed (available for iOS and Android).
  • A Samsung account (or a supported third-party account) signed in to the app.
  • A SmartThings-compatible smart home hub (such as a Samsung SmartThings Hub) or a device that works directly over Wi-Fi without a hub.
  • At least one smart device already set up and connected to your network (e.g., a smart bulb, plug, or switch).

Step-by-Step

  1. Open the SmartThings app on your phone or tablet. If this is your first time, sign in with your Samsung account and follow the initial setup prompts.
  2. Add a device: Tap the Devices tab at the bottom of the screen. Then tap the + (plus) icon in the top-right corner. Choose Add device and select the type of device you’re adding (e.g., bulb, plug, sensor). The app will search for nearby devices. Follow the on-screen instructions to put your device in pairing mode (often by pressing a button or toggling power). Once found, select it and confirm.
  3. Assign the device to a room: After the device is added, the app will ask you to choose a room. If you haven’t created rooms yet, tap Create new room and name it (e.g., “Living Room”). You can also skip this step and assign a room later. To change a device’s room later, go to the device’s settings (gear icon) and tap Room.
  4. Create or edit rooms: Go to the Devices tab. Tap the Rooms icon (usually a grid or house icon) at the top. Here you can add a new room by tapping +, or edit existing rooms by tapping the pencil icon. You can rename rooms, change their icon, and reorder them.
  5. Control devices individually: From the Devices tab, tap on a room to see its devices. Tap a device to open its control panel. For a light, you’ll see a power toggle and brightness/color controls. For a plug, you’ll see a simple on/off switch. For a thermostat, you’ll see temperature controls. Use these controls to adjust the device as needed.
  6. Control all devices in a room at once: On the room’s page, you can tap the room’s name or the power icon next to it to turn all devices in that room on or off (if they support it). Some devices may not respond to a room-wide command if they don’t have a power feature.
  7. Use the Favorites tab for quick access: The Favorites tab (home icon) shows your most-used devices and rooms. To add a device or room to Favorites, long-press it and select Add to Favorites. This lets you control them from the main screen without digging into menus.
  8. Create an automation: Tap the Automations tab at the bottom. Tap + to create a new automation. Choose a trigger (e.g., time, device status, or location) and then select an action (e.g., turn on a light, lock a door). For example, you can set a light to turn on at sunset in the “Living Room” room. Follow the prompts to save and enable the automation.
  9. Use voice control (optional): If you have a compatible voice assistant (like Bixby, Google Assistant, or Alexa), you can link your SmartThings account and control devices by voice. For example, say “Turn on the living room lights” or “Set the thermostat to 72 degrees.”
  10. Check device status: The Devices tab shows a status icon (e.g., a green dot for online, gray for offline). If a device is unresponsive, tap it and try to refresh the status or check the device’s power and network connection.

Common Mistakes

  • Not putting the device in pairing mode: Many devices require you to press a button or hold it for a few seconds before the app can find it. Read the device manual or look for a blinking light indicator.
  • Ignoring room assignments: If you skip assigning a device to a room, it goes into the “Unassigned” category, which can make it hard to find later. Always assign a room when adding a device.
  • Using the wrong network: Your phone and the smart device must be on the same Wi-Fi network (or the device must be connected to the hub) for the app to communicate. If you have a dual-band router, make sure both are on the same band (2.4 GHz is often required for older devices).
  • Overlooking device permissions: The app needs location and Bluetooth permissions to discover and control some devices. If you denied these, the app may not work properly.

Tips

  • Use room names that are clear: Instead of “Room 1,” use “Living Room” or “Office” so you can easily identify them in automations and voice commands.
  • Group similar devices: If you have multiple lights in a room, you can create a group (e.g., “Ceiling Lights”) to control them together. To do this, go to the room, tap +, and select Add group. Then choose the devices you want to include.
  • Set up routines for daily use: Use the Automations tab to create routines like “Good Morning” that turn on lights and adjust the thermostat when you wake up.
  • Keep the app updated: SmartThings updates frequently with new features and bug fixes. Enable automatic updates in your phone’s app store.
  • Use scenes for one-tap control: Scenes let you set multiple devices to specific states at once. For example, a “Movie Night” scene can dim the lights and lower the blinds. You can create scenes from the Automations tab.

Troubleshooting

  • Device not appearing in the app: Make sure the device is powered on and in pairing mode. Restart the SmartThings app. If it still doesn’t appear, try resetting the device (check its manual) and adding it again.
  • Device shows as offline: Check if the device’s hub is online. For Wi-Fi devices, verify they are connected to the internet. Sometimes a simple power cycle (unplug and plug back in) fixes the issue.
  • App is crashing or freezing: Force close the app and reopen it. If that doesn’t help, clear the app’s cache (in your phone’s settings) or reinstall the app. Make sure your phone’s operating system is up to date.
  • Can’t control a device after adding it: Try toggling the device’s power switch (if it has one) to reset its state. Also, check if the device is in a room that has a conflicting automation. Temporarily disable automations to test.
  • Voice control not working: Ensure your voice assistant is linked to SmartThings in its own app. Check that the device name is simple and unique (e.g., “Kitchen Light” instead of “Light 1”). Re-link the account if needed.

Frequently Asked Questions

Can I control devices from outside my home?

Yes, as long as your SmartThings hub (or the device itself) has an internet connection. The app uses the cloud to reach your devices remotely.

Do I need a SmartThings Hub?

Not for all devices. Many Wi-Fi–based devices (like some smart plugs and bulbs) work directly with the app without a hub. However, devices that use Zigbee or Z-Wave protocols require a hub to communicate.

Can I share control with family members?

Yes, you can invite others to your SmartThings home. Go to the Menu (three lines) > Home > Members and send an invitation via email or text. They’ll need a Samsung account.

What if I have a device that’s not from Samsung?

SmartThings supports many third-party brands. Check the app’s Add device menu for a list of compatible brands. Some may require a separate integration or a code.

Can I control devices with my Apple Watch or Android Wear?

Yes, there are companion apps for smartwatches that let you control basic functions, but the experience varies by device and watch model. Check the app store for your watch.

How do I delete a device or room?

To delete a device, go to its settings and tap Remove. To delete a room, go to the Rooms tab, tap the pencil icon, and select the trash icon next to the room. Note that deleting a room does not delete the devices in it; they become unassigned.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →