sodcalculator

10 Tech How-To

How to Voice Record on Windows 10

Guide 10-50936 · Updated · Step by step

This guide shows you how to capture audio on a Windows 10 PC using the built-in Voice Recorder app, plus how to troubleshoot common issues and get better sound quality. You don’t need to install anything—just a working microphone and a few clicks.

What You’ll Need

  • A Windows 10 PC with the Voice Recorder app (preinstalled on most versions).
  • A microphone: built-in laptop mic, USB mic, or headset with mic.
  • Speakers or headphones to play back the recording.
  • Optional: an external microphone for better audio quality.

Step-by-Step

  1. Check your microphone is connected and enabled. If using an external mic, plug it into the correct port (usually pink or USB). For wireless mics, pair them via Bluetooth. To verify, right-click the speaker icon in the system tray, select Open Sound settings, then under Input choose your mic and speak—the test bar should move.
  2. Open the Voice Recorder app. Click the Start button (Windows logo) and type Voice Recorder in the search box. Click the app icon when it appears. If you can’t find it, it may be hidden—you can also search for Microsoft Voice Recorder in the Microsoft Store and install it for free.
  3. Set the microphone as the default input device. In the Voice Recorder app, click the gear icon (Settings) in the bottom-left corner. Under Microphone, select the mic you want to use. If you only have one mic, it will be selected automatically.
  4. Adjust input volume (optional). In the same Settings pane, you’ll see a Microphone volume slider. Set it to about 75–80% to avoid clipping. If your voice sounds too quiet or distorted, adjust this before recording.
  5. Start recording. Click the large round button with a microphone icon (or press Ctrl + R). The app will begin capturing audio immediately. A timer will show elapsed time, and a waveform will appear if sound is being picked up.
  6. Pause and resume (if needed). While recording, you can click the pause button (two vertical bars) to temporarily stop. To resume, click the same button (now a play icon). This creates separate segments in the final file.
  7. Stop the recording. Click the red square (Stop) button (or press Ctrl + S). The app automatically saves the recording and shows it in the list on the left side.
  8. Play back your recording. Click the recording in the list to select it, then press the play button (triangle) at the bottom. Use the timeline to scrub to a specific point.
  9. Rename the recording. Right-click the recording in the list, select Rename, type a new name, and press Enter. This helps you identify files later.
  10. Trim the recording (optional). Select the recording, then click the Trim icon (scissors) at the bottom-right. Drag the handles to set the start and end points, then click Save a copy or Update original.
  11. Export or share the file. Right-click the recording and choose Open file location to see the .m4a file in File Explorer. You can then copy, move, or share it like any other file. To share directly, click the Share icon (up arrow) and choose an app.

Common Mistakes

  • Wrong microphone selected. If you have multiple mics (e.g., webcam and headset), the app might pick the wrong one. Always check the mic name in Settings before recording.
  • Microphone privacy settings block access. Windows 10 has a privacy setting that can prevent apps from using the mic. If the app shows no waveform, this is often the cause.
  • Recording too close or too loud. Speaking directly into the mic or having the volume too high causes distortion (clipping). Keep a comfortable distance and lower the input volume if needed.
  • Forgetting to stop recording. If you close the app without stopping, the recording may be lost or saved incomplete. Always click the stop button.
  • Using the wrong file format. Voice Recorder saves in .m4a (AAC audio). Some older devices or apps may not play this format—convert to MP3 or WAV if needed.

Tips

  • Use a quiet room. Background noise (fans, traffic, keyboard) will be picked up. Close windows and doors, and consider a soft surface like a carpet to reduce echo.
  • Position the mic correctly. For a headset, place the mic about 2–3 cm from the corner of your mouth. For a laptop, speak at a normal volume from about 30 cm away.
  • Test before the real recording. Do a 5-second test, play it back, and adjust the mic volume or position if needed.
  • Use the pause button for long recordings. This lets you take breaks without creating separate files.
  • Keep recordings organized. Rename files immediately and use folders in File Explorer to sort them by project or date.
  • Back up important recordings. Copy files to OneDrive, an external drive, or cloud storage to avoid losing them if your PC crashes.

Troubleshooting

No sound is being recorded (waveform is flat).

  • Check that the mic is not muted. Some mics have a physical mute button or switch.
  • Open Settings > Privacy > Microphone. Ensure Allow apps to access your microphone is turned on, and that Voice Recorder is allowed under Choose which apps can access your microphone.
  • Right-click the speaker icon in the system tray, select Open Sound settings, then under Input ensure the correct mic is selected and the volume is not at zero.
  • Run the microphone troubleshooter: Settings > System > Sound > Troubleshoot under the Input section.

Recording is too quiet.

  • Increase the microphone volume in the Voice Recorder settings or in Windows Sound settings.
  • Move closer to the mic, but not so close that you cause popping sounds.
  • If using a laptop, the built-in mic may be weak—consider an external USB mic.

Recording has a lot of background noise.

  • Use a directional mic (like a headset) rather than the laptop’s omnidirectional mic.
  • Record in a quieter environment, or use a noise suppression app (like Krisp) if available.
  • In Voice Recorder, there is no built-in noise reduction, so you may need to edit the audio in a separate program.

Voice Recorder won’t start or crashes.

  • Update the app: open Microsoft Store, go to Library, and click Get updates.
  • Restart your PC—this often fixes temporary glitches.
  • Reset the app: Settings > Apps > Apps & features, find Voice Recorder, click Advanced options, then Reset.

Recording plays back but sounds distorted.

  • Lower the microphone input volume to below 80%.
  • Move the mic further from your mouth.
  • Check if the problem persists with a different mic—if so, the issue may be with the mic itself.

Frequently Asked Questions

Where are Voice Recorder files saved?
By default, recordings are saved in a folder called Sound recordings inside your Documents folder. You can find the exact location by right-clicking a recording and selecting Open file location.

Can I record system audio (e.g., music playing on my PC)?
Voice Recorder only captures microphone input, not system sound. To record both, you need to enable Stereo Mix in your sound settings (if your sound card supports it) or use third-party software like Audacity.

What file format does Voice Recorder use?
It saves recordings as .m4a files (AAC audio). This is widely supported but not universal—if you need MP3, convert the file using a free converter or use another app.

How long can I record for?
There’s no set time limit in Voice Recorder. It records until you stop, limited only by available disk space. A one-hour recording at default quality takes roughly 50–100 MB.

Can I record phone calls or meetings?
Voice Recorder only captures the microphone, so it will record your side of a phone call or your voice in a meeting. It won’t capture the other person’s voice unless it comes through your speakers and the mic picks it up.

Is there a way to transcribe the recording?
Voice Recorder doesn’t have built-in transcription. You can upload the .m4a file to a transcription service or use Windows’ built-in Dictation in a separate app to transcribe while playing, though accuracy may vary.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →