Yes, you can install the Canon MX870 driver on Windows 10, but the official installer from Canon’s website is designed for older Windows versions and often fails on Windows 10. The reliable fix is to use the built-in Windows driver or install the driver in compatibility mode, and this guide walks you through both methods step by step.
Why the Canon MX870 Has Driver Issues on Windows 10
The Canon Pixma MX870 is a multifunction inkjet printer released around 2010. Canon’s official driver downloads for this model target Windows XP, Vista, and 7. Microsoft’s Windows 10 driver architecture changed significantly, and Canon never released a dedicated Windows 10 driver for the MX870. When you run the old setup program, it may stop with an error like “This program has a compatibility problem” or simply not detect the printer over USB.
That doesn’t mean the printer is useless. Windows 10 includes a generic Canon driver that supports basic printing and scanning for many older models. For most home users, this generic driver works fine for everyday documents and photos. If you need the full feature set—like the MX870’s automatic document feeder, duplex printing, or the special photo paper settings—you may need to use the compatibility mode method to install the original Canon software.
Method 1: Install Using Windows Update (Easiest)
This method uses the driver that Windows 10 already knows about. It usually takes less than five minutes and doesn’t require downloading anything.
- Turn on the Canon MX870 and connect it to your PC with a USB cable. Do not connect it before starting the process.
- Press the Windows key + I to open Settings, then go to Devices > Printers & scanners.
- Click Add a printer or scanner. Windows will search for available printers.
- If your printer appears in the list, select it and click Add device. Windows will install the driver automatically.
- If it doesn’t appear, click The printer that I want isn’t listed, then choose Add a local printer or network printer with manual settings. Select the USB port (usually USB001) and click Next.
- In the list of manufacturers, choose Canon. On the right, select Canon MX870 series (or Canon MX870 if listed). Click Next and follow the prompts.
If Windows says the driver is not digitally signed or you see a warning, that’s normal for older Canon drivers. Choose Install this driver software anyway.
Method 2: Compatibility Mode with the Official Canon Driver
If you want the full Canon software suite, download the official driver from Canon’s support page for the MX870 (look for the Windows 7 64-bit or 32-bit version, depending on your Windows 10 version). Then run the installer in compatibility mode.
- Right-click the downloaded setup file (usually
mx870win71064.exeor similar) and select Properties. - Go to the Compatibility tab.
- Check the box Run this program in compatibility mode for: and choose Windows 7 from the dropdown.
- Also check Run this program as an administrator.
- Click Apply, then OK.
- Double-click the setup file and follow the installation steps. When prompted, connect the printer via USB.
If the installer still fails, try Windows Vista (Service Pack 2) compatibility mode. Some users report that the Vista mode works better for the MX870’s scanner driver. After installation, restart your PC and test print.
How to Check if the Driver Is Installed Correctly
After installation, verify that Windows recognizes the printer properly. Open Devices and Printers (type “printers” in the Start menu). You should see the Canon MX870 icon. Right-click it and select Printer properties. Click the Print Test Page button. If the page prints, you’re good.
For scanning, open the Windows Scan app (built into Windows 10) or use the Canon IJ Scan Utility if you installed the full software. In Windows Scan, click the Source dropdown to choose Flatbed or Document Feeder. If the scanner doesn’t appear, the driver may not have installed the WIA (Windows Image Acquisition) component. In that case, go back to Devices and Printers, right-click the printer, and select Scan properties to test the scanner.
Common Problems and Fixes
- Printer not detected over USB: Try a different USB port (preferably a rear port on the PC). Avoid USB hubs. If it still fails, uninstall the driver completely, restart, and try again.
- Error “Driver is unavailable”: This happens when Windows can’t find a compatible driver. Use Method 1 and manually select the Canon MX870 from the list.
- Scanner works but printer doesn’t: The printer driver may be corrupted. Uninstall the printer from Devices and Printers, then reinstall using Method 1.
- Printing is very slow or prints garbage: This is often a USB connection issue or a wrong driver. Make sure you selected the MX870 series driver, not the generic Canon driver.
- Duplex printing not available: The generic Windows driver may not expose the duplex unit. Use the compatibility mode installation to get the full driver.
Alternative: Use a Generic PostScript or PCL Driver
If both methods fail, you can install a generic driver that works with most inkjet printers. In Devices and Printers, add a printer manually, select the USB port, then choose Microsoft as the manufacturer and Microsoft XPS Document Writer (not a real printer) or Generic / Text Only. But that won’t give you proper printing. A better alternative is to use the Canon MX870 series driver from Windows Update as described in Method 1—it’s the same driver Microsoft distributes.
Another option is to use a virtual PDF printer (like Microsoft Print to PDF) if you only need to save documents as PDFs. But that doesn’t print physically.
Frequently Asked Questions
Is the Canon MX870 officially supported on Windows 10?
No. Canon never released a Windows 10 driver for the MX870. The printer works with Windows 10 only through the generic driver or by running the old driver in compatibility mode.
Will the scanner work on Windows 10?
Yes, the scanner generally works. The Windows built-in Scan app can use the WIA driver that gets installed with the printer. If you installed the full Canon software in compatibility mode, the IJ Scan Utility should also work.
Can I use the MX870 over Wi-Fi on Windows 10?
The MX870 has Wi-Fi, but the old Canon network setup utility often fails on Windows 10. You can try to connect the printer to your network using its own control panel, then add it as a network printer in Windows. However, the generic driver may not support network scanning. USB is the most reliable connection.
Why does the Canon installer say “This program has a compatibility problem”?
That’s Windows 10 blocking the old installer because it was designed for Windows 7 or earlier. Running it in compatibility mode (Method 2) usually bypasses this.
Do I need to uninstall the old driver before installing a new one?
Yes, it’s best to uninstall any existing Canon printer software from Control Panel > Programs and Features, then remove the printer from Devices and Printers. Restart your PC before reinstalling.
Final Thoughts
Installing the Canon MX870 on Windows 10 is a bit of a workaround, but it’s very doable. Start with the Windows Update method—it’s the safest and fastest. If you need the full software features, use compatibility mode. And if all else fails, a USB connection with the generic driver will still give you solid printing and scanning for most tasks.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Turn Off Shutter Sound on iPhone
- VPN Setup on iPhone SE: Step-by-Step Guide
- Fix Internet Not Working on Windows 11
- Fix Right Click Not Working in Firefox
- Compare Two Columns with Comma Separated Values in Excel
- How to Limit Ad Tracking on iPhone Apps