sodcalculator

10 Tech How-To

iOS 18 Flashlight Not Working? Fix It

Guide 10-44079 · Updated · Step by step

If your iPhone flashlight isn’t turning on after updating to iOS 18, the most common causes are a temporary software glitch, an overheating phone, or the camera in use. You can usually fix it by force-quitting the Camera app, checking the Control Center toggle, or restarting your iPhone. This guide walks through each fix step by step, plus what to do if the problem persists.

Why the Flashlight Stops Working on iOS 18

The flashlight on an iPhone is a physical LED component controlled by software. iOS 18 introduced a new flashlight interface in Control Center, and some users have reported the toggle appearing stuck or unresponsive. The issue is almost always software-related rather than a hardware failure, especially if the flashlight worked before the update.

Common triggers include:

  • A background app (especially the Camera) holding the LED in use.
  • The iPhone overheating, which makes iOS disable the flashlight to protect the LED.
  • A glitch in the Control Center’s new flashlight slider.
  • Low Battery Mode or a very low battery percentage.

Quick Fixes to Try First

Start with these simple steps—they resolve most flashlight issues in under a minute.

  1. Force-quit the Camera app: Swipe up from the bottom and hold to open the App Switcher, then swipe the Camera card up to close it. The flashlight often stays locked while the camera is active.
  2. Toggle the flashlight in Control Center: Swipe down from the top-right corner (or up from the bottom on older models) and tap the flashlight icon. If it’s already highlighted, tap it off, wait a second, then tap it on again.
  3. Check the Lock Screen button: Press and hold the flashlight icon on the Lock Screen. If it doesn’t respond, try the Control Center toggle instead.
  4. Restart your iPhone: Press and hold the side button and either volume button until the power off slider appears. Slide to power off, wait 30 seconds, then turn it back on.

If the Flashlight Icon Is Grayed Out or Missing

In iOS 18, you can customize Control Center. If the flashlight icon is missing entirely, it may have been removed accidentally. To add it back:

  1. Open Control Center.
  2. Tap the + button in the top-left corner.
  3. Tap Add a Control and search for “Flashlight”.
  4. Tap the plus icon next to it to add it back.

If the icon is present but grayed out, the phone may be too hot or the LED is in use by another process. Wait a few minutes and try again.

When Overheating or Battery Is the Cause

iPhones automatically disable the flashlight when the device gets too hot—this is a protective measure to prevent damage to the LED or battery. If your phone feels warm, especially after charging or using GPS, let it cool down for 10–15 minutes before trying again.

Low Battery Mode can also interfere. Go to Settings > Battery and turn off Low Power Mode if it’s on. If your battery is below 10%, plug in the charger and try again after a few minutes.

What to Do If the Flashlight Still Won’t Turn On

If none of the above work, try these deeper troubleshooting steps:

  • Reset all settings: Go to Settings > General > Transfer or Reset iPhone > Reset > Reset All Settings. This won’t delete your data, but it will reset Wi-Fi passwords, wallpaper, and Control Center layout. You’ll need to re-add the flashlight control if you customized it.
  • Update iOS: Check Settings > General > Software Update for any available updates. Apple frequently releases bug fixes for issues like this.
  • Restore from backup: If the problem started after a specific app installation, try restoring your iPhone from a recent backup (before the issue began) using a computer.

Hardware vs. Software: How to Tell

If the flashlight still doesn’t work after a full settings reset and a software update, it may be a hardware issue. To test, open the Camera app and switch to video mode, then turn on the flash by tapping the lightning bolt icon. If the flash doesn’t fire, the LED module may be damaged.

Another sign of hardware failure: the flashlight works intermittently or only when you press hard on the phone. In that case, contact Apple Support or visit an Apple Store for diagnosis. Do not attempt to open the phone yourself—you could damage the internal components or void any warranty.

Frequently Asked Questions

Why did my flashlight stop working after the iOS 18 update?

The update may have changed Control Center settings or left a glitch in the flashlight control. Force-quitting the Camera app and restarting your iPhone usually clears it.

Can I use the flashlight while the camera is open?

No, the flashlight and camera flash share the same LED. If the Camera app is open (even in the background), the flashlight may be disabled. Close the Camera app completely first.

Will a factory reset fix the flashlight?

A factory reset (erase all content and settings) can fix stubborn software issues, but try a settings reset first—it’s less disruptive. If the problem is hardware, a reset won’t help.

Does Low Power Mode affect the flashlight?

Yes, Low Power Mode can disable some non-essential functions, though the flashlight usually still works. If it doesn’t, turn off Low Power Mode and try again.

My flashlight turns on but is very dim. What’s wrong?

In iOS 18, you can adjust the flashlight brightness by pressing and holding the flashlight icon and dragging the slider up or down. If it’s still dim at max, the LED may be dirty or partially blocked—wipe the lens gently with a soft cloth.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →