sodcalculator

10 Tech How-To

iPad or iPhone Charging Slowly? Why & How to Fix It

Guide 10-49820 · Updated · Step by step

If your iPad or iPhone is charging slowly, the usual culprits are a weak power adapter, a worn or non-certified cable, a dirty charging port, or background activity during charging. Start by using the original Apple charger and cable, plugging directly into a wall outlet, and cleaning the port gently; this resolves most slow-charging cases.

Why Charging Speed Varies

Charging speed depends on the power source, the cable’s condition and certification, the device’s temperature, and what the device is doing while plugged in. iPhones and iPads negotiate power with the adapter using a protocol; if the adapter or cable can’t deliver the requested wattage, the device falls back to a slower standard USB rate (5W or less).

For example, an iPhone 15 Pro Max can accept up to about 27W, but if you plug it into a 5W charger, it will charge at roughly 1A/5W—many hours for a full battery. iPads typically need 20W or more for fast charging; using a phone charger on an iPad Pro will charge it, but slowly.

How iPhone and iPad Charging Works

Modern Apple devices use USB Power Delivery (PD) for fast charging. The charger and device communicate over the USB cable’s data lines to agree on a voltage and current. The device first charges at a constant current until it reaches about 80% capacity, then switches to a slower constant-voltage phase to protect the battery. That’s why the last 20% always takes longer.

Wireless charging (Qi) is slower than wired because of energy loss through the charging pad. Even with a 15W MagSafe charger, an iPhone charges slower than with a 20W wired adapter. Heat also slows charging: the device reduces power if it gets too warm, so charging under a pillow, in direct sunlight, or while gaming can cut speed significantly.

Common Causes of Slow Charging

  • Weak power adapter: Using a 5W adapter (the old iPhone cube) with a modern iPhone or iPad will charge very slowly.
  • Damaged or non-certified cable: Frayed wires, bent pins, or cables without MFi (Made for iPhone/iPad) certification can reduce current or cause intermittent charging.
  • Dirty or lint-filled charging port: Pocket lint and dust can block the Lightning or USB-C connector, preventing full contact.
  • Background activity: Navigation, video streaming, or large downloads while charging consume power, so the battery gains less charge per minute.
  • Old battery: As batteries age, their internal resistance increases, so they accept less current and charge slower.
  • Software glitch: Occasionally, a bug in iOS can cause the device to not negotiate fast charging correctly.

How to Fix Slow Charging (Step-by-Step)

  1. Use a high-wattage adapter. For iPhone, use at least 18W–20W USB-C adapter. For iPad, use 20W or higher (iPad Pro can take up to 30W–35W).
  2. Check the cable. Use the cable that came with the device or a certified MFi cable. Try a different cable to see if the problem follows the cable.
  3. Clean the charging port. Power off the device, then use a soft wooden toothpick or a soft-bristled brush to gently remove lint. Do not use metal pins or blow air, as that can damage the connector.
  4. Plug directly into a wall outlet. Avoid USB hubs, power strips with USB ports, or older computers—they often provide less current.
  5. Close heavy apps and lower screen brightness. Turn off Background App Refresh and reduce screen brightness while charging.
  6. Enable Airplane Mode. This stops cellular and Wi-Fi radios from drawing power, speeding up charging noticeably.
  7. Restart your device. Sometimes a simple restart clears a software glitch that prevents fast charging.
  8. Update iOS. Go to Settings > General > Software Update. Apple occasionally fixes charging-related bugs.

How to Tell If Your Charger Is Fast Enough

On iPhones, you can check the battery percentage increase over a fixed time. A rough test: with a 20W charger, an iPhone should gain about 30–40% in 30 minutes from 0%. If you’re gaining less than 20% in 30 minutes, your setup is slow.

For a more precise measurement, use a USB power meter (a small inline device) that shows voltage and current. A healthy fast charge will show around 9V and 2A (18W) for iPhones, or 15V and 2A (30W) for iPads. If you see 5V and 1A, your charger or cable is the bottleneck.

Also, check the adapter’s label for output ratings. A 20W adapter should list “5V/3A” or “9V/2.22A”. If it only says “5V/1A”, that’s a 5W charger.

Battery Health and Slow Charging

If your device is older, battery health matters. Go to Settings > Battery > Battery Health & Charging. If Maximum Capacity is below 80%, the battery is significantly degraded and will charge slower and hold less charge. Apple’s warranty covers battery replacement if capacity drops below 80% within the warranty period. Otherwise, a battery replacement is a paid service.

Heat is the biggest enemy of battery health. Avoid charging overnight on a pillow or under covers. Remove thick cases while charging if the device gets hot. Also, avoid using the device heavily while charging, as the combination of heat and high current accelerates battery aging.

Wireless Charging vs. Wired Charging

Wireless charging is convenient but slower. A 15W MagSafe charger will charge an iPhone to 50% in about 30 minutes, but a 20W wired charger will do it in about 20 minutes. Standard Qi chargers (7.5W for iPhone) are even slower. If you’re in a hurry, use a cable.

One tip: if you use wireless charging, place the phone correctly on the pad’s center. Misalignment reduces efficiency and generates more heat, further slowing charging.

When to Replace the Charger or Cable

If you’ve tried multiple cables and adapters and the problem persists, the issue may be the device’s charging port or battery. Before replacing anything, test with a friend’s charger and cable. If that works, your charger or cable is faulty.

Apple’s cables are known to fray at the ends. Inspect the cable for kinks, exposed wire, or discolored pins. A cable that works only when bent is definitely damaged. Replace it with a new MFi-certified cable to ensure safe charging speeds.

Frequently Asked Questions

Why does my iPhone charge slower on a power bank?

Most power banks output 5V/2A (10W) or less from their USB-A ports. To get fast charging from a power bank, it must support USB Power Delivery (PD) and you must use a USB-C to Lightning or USB-C to USB-C cable. Check the power bank’s specifications for PD support.

Is it bad to use my phone while charging?

It’s not dangerous, but it can slow charging and increase heat. Heavy use while charging (gaming, video) can cause the device to throttle charging to protect the battery. For fastest charging, leave the device idle.

Why does my iPad charge slowly with my iPhone charger?

iPhone chargers typically provide 5W–20W, while iPads require 20W–30W for full speed. Using a 5W charger with an iPad will result in very slow charging. Use a 20W or higher adapter.

Can a dirty charging port cause slow charging?

Yes. Lint and debris can block the connector pins, reducing contact and current flow. Clean the port gently with a toothpick or soft brush. If you see corrosion or damage, seek professional repair.

How long should an iPhone take to charge from 0 to 100%?

With a 20W adapter, an iPhone typically reaches 50% in about 30 minutes and 100% in about 1.5–2 hours. With a 5W adapter, it can take 3–4 hours. The last 20% always takes longer due to trickle charging.

Does using a higher wattage charger damage the battery?

No. The device only draws as much power as it needs. Using a 30W charger with an iPhone that supports 20W will not damage it; the phone will simply limit the current. However, heat from fast charging can degrade battery health over time, so avoid charging in hot environments.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →