sodcalculator

10 Tech How-To

iPhone Recovery Mode Not Working? Fixes That Work

Guide 10-53755 · Updated · Step by step

If your iPhone is stuck in recovery mode or the mode itself won’t activate, the problem is usually a cable, port, or timing issue—not a broken phone. This guide walks you through the exact steps to get recovery mode working again, covering both entry failures and exit failures on current iPhone models.

What Recovery Mode Actually Does

Recovery mode is a fallback state in iOS that lets a computer communicate with the iPhone when the normal system won’t boot. It appears as a black screen with a cable pointing to a laptop or desktop. iTunes (on older macOS and Windows) or Finder (on macOS Catalina and later) uses this mode to restore or update the device. It’s the last resort for fixing a stuck Apple logo, a boot loop, or a failed software update.

When you enter recovery mode, the iPhone’s bootloader takes over and exposes a minimal USB interface. The main operating system is not loaded, so the screen stays dark except for the cable graphic. This is why the phone looks “off” to you but is actually waiting for a computer command.

Why Recovery Mode Fails to Enter

Most entry failures come down to one of four things:

  • Wrong button sequence – The steps differ by model, and mixing them up is the most common error.
  • Bad or non-Apple cable – Some third-party cables only charge and don’t carry data. The computer never sees the phone.
  • Dirty or damaged port – Lint or corrosion on the Lightning or USB-C port blocks the data pins.
  • Computer software issue – Outdated iTunes/Finder, missing drivers, or a USB port that doesn’t deliver enough power.

Before trying anything else, use the original cable that came with the phone, plug it directly into a USB port on the computer (not a hub), and restart both devices.

Correct Entry Steps by Model

The button presses changed with the iPhone 8 and later because the home button was removed. Here are the current sequences:

  • iPhone 8 and later (including SE 2nd/3rd gen): Press and quickly release Volume Up, then Volume Down, then press and hold the Side button until the recovery mode screen appears. Do not release the Side button when the Apple logo shows—keep holding.
  • iPhone 7 / 7 Plus: Press and hold both the Side button and Volume Down simultaneously. Keep holding until you see the recovery screen.
  • iPhone 6s and earlier, and iPhone SE 1st gen: Press and hold both the Home button and the Top/Side button together.

A common mistake is releasing the buttons too early. The recovery screen takes about 10–15 seconds to appear. If you see the Apple logo and then the screen goes black, you released too soon. Try again and hold longer.

If the Phone Won’t Exit Recovery Mode

Sometimes the phone enters recovery mode but gets stuck there. The usual cause is a failed restore or update that left the system incomplete. To force an exit:

  1. Unplug the phone from the computer.
  2. Press and quickly release Volume Up, then Volume Down.
  3. Press and hold the Side button until you see the Apple logo, then release.

If the phone reboots normally, the problem was a software glitch. If it goes straight back to recovery mode, the system is corrupted and you’ll need to restore it via Finder/iTunes. That will erase all data, so only do it after trying a normal update first.

Software-Side Fixes on the Computer

When the phone is in recovery mode but the computer doesn’t detect it, the issue is often on the computer side. Try these in order:

  • Update iTunes to the latest version (Windows) or ensure Finder is up to date (macOS).
  • On Windows, install the latest Apple Mobile Device USB driver. Open Device Manager, find the Apple device under “Universal Serial Bus devices,” right-click and choose “Update Driver.”
  • Try a different USB port, preferably a USB 2.0 port on the back of a desktop tower.
  • Restart the computer while the phone is still plugged in and in recovery mode.
  • If using a Mac, check that Finder has permission to access the phone under System Settings > Privacy & Security > Files and Folders.

If the computer still says “unknown error” (like error 4013 or 9), it often points to a hardware or cable problem. Try another known-good cable and a different computer if possible.

Hardware Issues That Mimic Software Failure

Not every recovery mode problem is fixable with software. A few hardware faults produce identical symptoms:

  • Broken charging port – The phone charges but data pins are damaged. You’ll see the recovery screen but the computer never connects.
  • Defective battery – If the battery is completely drained or dead, the phone may not have enough power to maintain recovery mode.
  • Water damage – Corrosion on internal connectors can interfere with the boot process.

If you’ve tried multiple cables, ports, and computers, and the phone still won’t respond, it’s likely hardware. At that point, taking it to a repair shop is the only option. Do not attempt to open the phone yourself—you risk damaging the display or logic board.

DFU Mode vs. Recovery Mode

People often confuse recovery mode with DFU (Device Firmware Update) mode. They are different:

  • Recovery mode loads a minimal iOS environment. It can be fixed with a normal restore and is easier to enter.
  • DFU mode bypasses the bootloader entirely. The screen stays black, and the computer sees the device in a special state that allows a full firmware restore. It’s the last resort when recovery mode itself fails.

Entering DFU mode uses the same button combinations but with different timing—you hold the buttons for a specific number of seconds and then release only the Side button while keeping the other held. Because DFU mode is riskier (it can make a bad situation worse if you’re not careful), try recovery mode first.

Frequently Asked Questions

Why does my iPhone keep going into recovery mode by itself?
This usually means the system is corrupted or there’s a hardware fault. Try a normal restart first. If it keeps happening, you’ll need to restore the phone via Finder/iTunes, which erases all data. If the problem persists after a clean restore, it’s likely a logic board issue.

Can I exit recovery mode without a computer?
Yes, on iPhone 8 and later, press and quickly release Volume Up, then Volume Down, then hold the Side button until the Apple logo appears. On iPhone 7, hold Side + Volume Down. On older models, hold Home + Top/Side. This forces a normal reboot and exits recovery mode.

What does error 4013 mean?
Error 4013 is a general communication error between the phone and computer. It often indicates a USB cable or port problem, but it can also mean the phone’s storage is failing. Try a different cable and port first. If it persists, it’s likely hardware.

How long should recovery mode take?
Entering recovery mode takes about 10–15 seconds of holding buttons. Once the computer detects it, a restore can take 5–20 minutes depending on the model and connection speed. If it takes over an hour, the connection has likely dropped.

Will a restore in recovery mode erase my data?
Yes, a standard restore erases everything. If you have a recent iCloud or computer backup, you can restore from that after the process. If you’re trying to update instead of restore, choose “Update” in Finder/iTunes—that keeps your data but is less likely to fix a deep corruption.

Is it safe to use third-party recovery mode tools?
Third-party tools that claim to exit recovery mode without data loss are risky. They often use undocumented exploits and can cause further instability. Stick with Apple’s official Finder/iTunes method unless you fully understand what the tool does.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →