sodcalculator

10 Tech How-To

IRQL_NOT_LESS_OR_EQUAL Error: Fixes That Work

Guide 10-56913 · Updated · Step by step

The IRQL_NOT_LESS_OR_EQUAL error (bug check 0x0000000A) is a Windows Blue Screen of Death (BSOD) that occurs when a kernel-mode driver or system process accesses memory at an incorrect interrupt request level. This guide explains the causes and provides step-by-step fixes you can apply right now, starting with the most common solutions.

What Does IRQL_NOT_LESS_OR_EQUAL Mean?

In Windows, the CPU uses an Interrupt Request Level (IRQL) to prioritize hardware interrupts and thread scheduling. When a driver attempts to access memory that is paged out (stored on disk) while running at an elevated IRQL, the system cannot wait for the page to be loaded and triggers a bug check. The error message often appears as:

IRQL_NOT_LESS_OR_EQUAL (0x0000000A)

This is a kernel-mode error, meaning the problem lies with a driver, not a typical application. The most frequent culprits are:

  • Outdated or incompatible device drivers (especially graphics, network, or storage drivers)
  • Faulty RAM or memory corruption
  • Recently installed software that installs a kernel driver (antivirus, VPN, virtualization tools)
  • Corrupted system files or Windows updates

How to Fix IRQL_NOT_LESS_OR_EQUAL

Work through these fixes in order. Most users resolve the error with the first two steps.

1. Boot into Safe Mode

If the error prevents Windows from starting normally, boot into Safe Mode to access troubleshooting tools:

  1. Restart the PC and press F8 (or hold Shift while clicking Restart) to open Advanced Startup Options.
  2. Select Troubleshoot > Advanced options > Startup Settings > Restart.
  3. Press 4 or 5 to boot into Safe Mode (with or without networking).

If Safe Mode loads, the issue is likely a driver or service that runs at startup.

2. Update or Roll Back Drivers

Outdated drivers are the #1 cause. Use the Windows Device Manager to check for updates:

  1. Right-click the Start button and select Device Manager.
  2. Expand categories (e.g., Display adapters, Network adapters).
  3. Right-click a device and select Update driver > Search automatically.
  4. Repeat for all major devices, especially chipsets, graphics, and network adapters.

If the error started after a driver update, roll back the driver instead: right-click the device > Properties > Driver tab > Roll Back Driver.

3. Run Windows Memory Diagnostic

Faulty RAM is a common trigger. Test your memory:

  1. Press Win + R, type mdsched.exe, and press Enter.
  2. Choose Restart now and check for problems.
  3. Windows will restart and run the memory test. If errors appear, replace the faulty RAM module.

4. Check for Corrupted System Files

Run the System File Checker (SFC) and DISM tools:

  1. Open Command Prompt as administrator (right-click Start > Windows Terminal (Admin)).
  2. Run sfc /scannow and wait for it to finish.
  3. Then run DISM /Online /Cleanup-Image /RestoreHealth.
  4. Restart the PC.

5. Uninstall Recently Installed Software

If the error began after installing new software, uninstall it. Pay special attention to:

  • Antivirus or firewall programs (they install kernel drivers)
  • Virtualization tools (VMware, VirtualBox, Hyper-V)
  • VPN clients
  • Disk encryption tools

Use Settings > Apps > Installed apps to remove them, then restart.

6. Disable Fast Startup

Fast Startup can cause stale driver states. Disable it:

  1. Go to Control Panel > Power Options > Choose what the power buttons do.
  2. Click Change settings that are currently unavailable.
  3. Uncheck Turn on fast startup and save changes.

7. Update BIOS and Firmware

An outdated BIOS can cause memory management issues. Check your motherboard manufacturer’s website for a BIOS update. Follow their instructions carefully—a failed BIOS update can brick your system.

What Does the Error Code 0x0000000A Mean?

The bug check code 0x0000000A is the hexadecimal identifier for IRQL_NOT_LESS_OR_EQUAL. The four parameters in the blue screen provide more detail:

  • Parameter 1 – The memory address that was accessed incorrectly.
  • Parameter 2 – The IRQL at the time of the fault.
  • Parameter 3 – The type of memory access (0 = read, 1 = write, 8 = execute).
  • Parameter 4 – The address of the instruction that caused the fault.

Most users won’t need to decode these, but they can help a support technician identify the offending driver.

How to Read the Minidump File

Windows creates a minidump file (C:\Windows\Minidump) when a BSOD occurs. Analyzing it can pinpoint the exact driver. Use the free tool WinDbg (from Microsoft Store) or BlueScreenView:

  1. Download and install BlueScreenView (or open WinDbg).
  2. Open the minidump file from the folder.
  3. Look for the caused by driver line—that’s the culprit.
  4. Update, roll back, or uninstall that driver.

IRQL_NOT_LESS_OR_EQUAL vs. Other BSOD Errors

This error is often confused with PAGE_FAULT_IN_NONPAGED_AREA (0x00000050) and KMODE_EXCEPTION_NOT_HANDLED (0x0000001E). While all three involve memory access issues, IRQL_NOT_LESS_OR_EQUAL specifically indicates the IRQL mismatch, whereas the others may be caused by corrupted drivers or hardware. The fixes overlap, but the minidump analysis is the most reliable way to differentiate.

When to Seek Professional Help

If you’ve tried all the above and the error persists, the problem may be hardware-related (failing RAM, SSD, or motherboard). Before replacing parts:

  • Test each RAM stick individually (remove all but one).
  • Run a disk check (chkdsk /f /r on the system drive).
  • Check the Windows Event Viewer for repeated hardware errors.

If you’re not comfortable with hardware diagnostics, take the PC to a reputable repair shop. They can run stress tests and replace faulty components.

Frequently Asked Questions

Can IRQL_NOT_LESS_OR_EQUAL be caused by overheating?

Overheating can cause system instability, but it’s not a direct cause of this specific error. However, overheating can lead to memory corruption, which might trigger the bug check. Monitor your CPU and GPU temperatures with tools like HWMonitor. If they exceed recommended limits, clean the fans and improve airflow.

Will resetting Windows fix the error?

Resetting Windows (Settings > System > Recovery > Reset PC) can fix the error if it’s caused by corrupted system files or a bad driver. Choose Keep my files to preserve your data. However, if the issue is hardware (like faulty RAM), a reset won’t help.

Is IRQL_NOT_LESS_OR_EQUAL a virus?

No, it’s not a virus. It’s a Windows error indicating a driver or hardware problem. However, certain malware can install malicious kernel drivers that cause this error. Run a full antivirus scan (Windows Defender or a trusted third-party) to rule out infection.

Why does the error happen only during gaming?

Gaming puts high load on the GPU and CPU, which can expose unstable overclocks or failing hardware. It can also trigger a buggy graphics driver. Update your GPU driver (clean install using DDU) and consider resetting any overclocks (CPU, GPU, RAM) to stock settings.

Can I ignore the error if it happens rarely?

If it happens once and never again, you might be fine. But if it recurs, it’s a warning sign of an underlying issue. Ignoring it could lead to data loss or permanent hardware damage. Always investigate if it occurs more than once a month.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →