sodcalculator

10 Tech How-To

Acer Laptop Keypad Not Working? 5 Fixes

Guide 10-53595 · Updated · Step by step

If your Acer laptop’s keypad (touchpad) has stopped responding, the fix is usually a simple driver update, a disabled-device toggle, or a settings change — not a hardware failure. Below are five troubleshooting steps that resolve the majority of non-working touchpad issues on Acer laptops running Windows 10 or Windows 11.

1. Check if the Touchpad Is Disabled

The most common cause is accidentally disabling the touchpad. Most Acer laptops have a function key (often F7 or F6) with a touchpad icon that toggles it on and off. Press Fn + F7 (or the corresponding key with a touchpad symbol) and look for an on-screen notification. Also check the top-left corner of the touchpad itself — some Acer models have a small light that, when lit, indicates the touchpad is off. Double-tap that area to re-enable it.

If the function key doesn’t work, open Settings > Bluetooth & devices > Touchpad and confirm the toggle is set to On. In Windows 11, the path is Settings > Bluetooth & devices > Touchpad; in Windows 10, it’s Settings > Devices > Touchpad.

2. Update or Reinstall the Touchpad Driver

A corrupted or outdated driver is the next likely culprit. Open Device Manager (right-click the Start button and select it), expand Mice and other pointing devices, and look for a device named “ELAN Input Device” or “Synaptics Pointing Device” (Acer uses both). Right-click it and choose Update driver > Search automatically for drivers. If Windows finds nothing, visit Acer’s support site, enter your laptop’s model number (found on the bottom label), and download the latest touchpad driver for your Windows version.

If updating doesn’t help, right-click the device in Device Manager and select Uninstall device. Check the box that says “Delete the driver software for this device” if it appears, then restart your laptop. Windows will reinstall a generic driver automatically — this often fixes a corrupted driver state.

3. Check Touchpad Settings in the Control Panel

Sometimes the touchpad is enabled but configured to ignore touches. Open the legacy Control Panel (type “Control Panel” in the Start menu), switch the view to Large icons, and click Mouse. Look for a tab labeled ELAN, Synaptics, or Device Settings. Inside, you’ll find options like “Enable” and “Disable” for the touchpad, plus sensitivity sliders. Make sure the touchpad is enabled and the sensitivity is not set to “lowest,” which can make taps and swipes unresponsive.

Also check Settings > Bluetooth & devices > Touchpad for “Touchpad sensitivity” — set it to Medium or High if you’re experiencing intermittent response.

4. Run the Hardware and Devices Troubleshooter

Windows includes a built-in troubleshooter that can detect and fix touchpad issues. In Windows 11, go to Settings > System > Troubleshoot > Other troubleshooters and click Run next to “Hardware and Devices.” In Windows 10, go to Settings > Update & Security > Troubleshoot > Additional troubleshooters and select Hardware and Devices. This tool checks for driver conflicts, disabled devices, and hardware detection problems. It may prompt you to restart or apply a fix automatically.

5. Check for Physical Obstructions or Hardware Failure

If none of the software steps work, inspect the touchpad surface. Dirt, oil, or a screen protector that overlaps the touchpad can interfere with its capacitive sensing. Clean it with a soft, slightly damp microfiber cloth. Also check if the touchpad clicks but doesn’t move the cursor — that points to a driver issue. If the cursor doesn’t move at all and the touchpad doesn’t click, the ribbon cable inside may have come loose (common after opening the laptop) or the touchpad hardware has failed. In that case, an external USB mouse will work, but you’ll likely need a technician to replace the touchpad module.

Frequently Asked Questions

Why is my Acer touchpad not working after a Windows update?

Windows updates can overwrite or conflict with the touchpad driver. Reinstall the driver from Acer’s support site (step 2) or use System Restore to roll back to before the update. In Device Manager, you can also right-click the touchpad and select Properties > Driver > Roll Back Driver if the option is available.

My touchpad works but the buttons don’t — what’s wrong?

If the cursor moves but left/right clicks don’t respond, the buttons may be physically worn or the driver’s click settings are misconfigured. Check the Mouse control panel for “Tap to click” and button assignment settings. If tapping works but pressing the physical buttons doesn’t, it’s likely a hardware issue.

Can I use an external mouse with my Acer laptop?

Yes, plug in a USB or Bluetooth mouse. The touchpad and an external mouse can work simultaneously, or you can disable the touchpad in Settings if you prefer. This is a good temporary fix while troubleshooting.

How do I permanently disable the touchpad on my Acer?

In the Mouse control panel’s ELAN or Synaptics tab, there’s usually an option to “Disable when external USB mouse is attached.” You can also turn off the touchpad entirely in Settings > Devices > Touchpad by toggling it off, though this may not be available on all models.

Does a BIOS reset help with touchpad issues?

Rarely, but if the touchpad was disabled in BIOS (some Acer models have a setting), resetting BIOS to defaults can help. Restart your laptop, press F2 repeatedly to enter BIOS, find “Load Defaults” or “Reset to Factory Settings,” save and exit. This is a last resort after trying the steps above.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →