sodcalculator

10 Tech How-To

MacBook Charger Not Working? Fix It Now

Guide 10-51191 · Updated · Step by step

If your MacBook charger isn’t working, the problem is often a damaged cable, a dirty charging port, or a faulty power adapter—and many of these issues can be fixed at home in under ten minutes without spending money. This guide walks you through the most common causes and step-by-step fixes, from simple resets to knowing when it’s time for a replacement.

First, Check the Obvious

Before you blame the charger itself, rule out the simplest explanations. If your MacBook isn’t charging, try these quick checks:

  • Is the outlet live? Plug a lamp or phone charger into the same wall socket to confirm it has power. Try a different outlet if possible.
  • Is the cable fully seated? Unplug both ends (wall and MacBook) and reconnect them firmly. A partially inserted connector is a common cause.
  • Is the MacBook too hot or too cold? macOS pauses charging if the battery temperature is outside its safe range (roughly 0–35°C / 32–95°F). Let it return to room temperature and try again.
  • Is the charging port clean? Lint or dust in the MagSafe port or USB-C port can block the connection. Use a wooden toothpick or a soft dry brush to gently remove debris. Never use metal tools or liquids.

If none of these work, move to the next steps.

Reset the SMC (Intel Macs Only)

The System Management Controller (SMC) manages power on Intel-based Macs. A glitch here can make the Mac think the charger isn’t connected. If you have an Intel Mac (most models before late 2020), try this reset:

  1. Shut down your MacBook.
  2. Connect the charger to the MacBook and a power outlet.
  3. On a MacBook with a T2 security chip or older models: press and hold Shift + Control + Option on the left side of the keyboard, then press and hold the power button simultaneously for 10 seconds. Release all keys at the same time.
  4. On MacBook Air (2018 or later) and MacBook Pro (2018 or later) with T2: press and hold the power button for 10 seconds, then release. Wait a few seconds, then press the power button again to turn it on.

For Apple Silicon Macs (M1, M2, etc.), there is no SMC to reset. Instead, simply restart the Mac or force-quit any apps that may be interfering.

Inspect the Cable and Adapter

Apple’s charging cables are notoriously prone to fraying near the connector ends. Look closely for:

  • Exposed wires, cuts, or kinks in the cable
  • Bent or broken pins inside the MagSafe connector
  • Discoloration or a burnt smell from the adapter
  • Loose or wobbly USB-C connector

If you see any damage, stop using the charger immediately. A frayed cable can short-circuit and damage your MacBook’s logic board. Replace it with an Apple-certified or high-quality third-party charger that meets USB-PD (Power Delivery) standards.

Try a Different Charger or Port

If your MacBook has multiple USB-C ports, try each one. Some ports may be damaged or have debris. If you have access to another charger (borrow from a friend or use a USB-C power bank), test it. This tells you whether the problem is with the charger or the MacBook itself.

Also, check the wattage. A MacBook Pro 16-inch needs at least 96W, while a MacBook Air can work with 30W. Using a lower-wattage charger may charge slowly or not at all, especially under load. Apple’s website lists the required wattage for each model.

Software and Battery Health

Sometimes the charger is fine, but macOS reports it as not charging because of battery health settings. Go to System Settings > Battery (or System Preferences > Battery on older macOS). Look for:

  • Optimized Battery Charging: This feature delays charging past 80% until it predicts you need it. If the battery is stuck at 80%, that’s normal. You can turn it off temporarily to force full charging.
  • Battery Health: Click “Battery Health…” to see the maximum capacity. If it’s below 80%, the battery may not accept a charge properly, even with a good charger.

Also, try resetting the USB-C controller: unplug the charger, restart your MacBook, and plug it back in after the desktop loads.

When to Replace vs. Repair

If you’ve tried all the above and the charger still doesn’t work, you likely need a new charger. Apple’s official chargers are expensive, but they include safety certifications. Third-party chargers can be cheaper, but make sure they are:

  • USB-PD certified (look for the USB-IF logo)
  • Rated for at least the wattage your MacBook requires
  • From a reputable brand with good reviews

If the MacBook itself isn’t charging even with a known-good charger, the issue may be the charging port or logic board. This requires professional repair—take it to an Apple Store or an authorized service provider. Do not attempt to open the MacBook yourself, as it contains high-voltage components and delicate ribbon cables.

Frequently Asked Questions

Why does my MacBook say “Not Charging” when plugged in?

This message appears when the Mac is drawing power from the adapter but not charging the battery. Common causes: the battery is at 100% (normal), the battery is too hot or cold, the charger wattage is too low, or the SMC needs a reset (Intel Macs). Check battery health and try a higher-wattage charger.

Can I use an iPhone charger to charge my MacBook?

Technically yes, if it’s a USB-C charger with at least 18W, but it will charge very slowly and may not charge at all while you’re using the Mac. It’s safe for occasional use, but not recommended as a daily solution because it can’t deliver enough power for the MacBook’s needs.

How long does a MacBook charger last?

With normal use, a charger can last 2–3 years. Cable fraying is the most common failure point. Avoid bending the cable sharply, wrap it loosely, and don’t pull on the cord to unplug it. Keeping the adapter in a well-ventilated area also helps prevent overheating.

Is it safe to use a third-party charger?

Yes, if it’s USB-PD certified and from a reputable brand. Cheap, uncertified chargers may not regulate voltage properly, which can damage your battery or even pose a fire risk. Look for the USB-IF certification logo and check reviews.

Why does my MacBook only charge when it’s off?

This usually indicates the charger isn’t providing enough wattage for the Mac to run and charge simultaneously. When the Mac is off, it draws less power, so the charger can top up the battery. Try a higher-wattage charger or close demanding apps while charging.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →