If you see a “macOS error generating kernel cache” message, it usually means the system’s preboot volume is corrupted or the kernel cache needs rebuilding. The fix is to boot into Recovery Mode and run kmutil to rebuild the cache, or to repair the disk with Disk Utility.
What Is the Kernel Cache?
macOS uses a kernel cache (a compressed collection of kernel extensions and drivers) to speed up booting. Instead of loading hundreds of individual kexts, the system loads one prebuilt file. This cache lives on the Preboot volume, which is separate from your main system volume. When the cache is missing, outdated, or corrupted, macOS cannot finish booting and may show an error like “Error generating kernel cache” or a prohibition sign.
Why Does This Error Happen?
Common triggers include:
- Interrupted macOS update or upgrade (power loss, forced restart)
- Third-party kernel extensions (kexts) that are incompatible or improperly signed
- Disk corruption on the Preboot or Data volume
- Running out of free space on the startup disk
- FileVault encryption issues during boot
How to Fix It (Step by Step)
Follow these steps in order. You will need to boot into Recovery Mode. On Apple Silicon (M1/M2/M3), shut down, then press and hold the power button until you see “Loading startup options.” On Intel Macs, restart and hold Command+R.
- Boot into Recovery Mode as described above.
- Open Disk Utility (from the Recovery menu). Select your startup disk (usually named “Macintosh HD”) and click First Aid. Run it on both the main volume and the Preboot volume if visible. This repairs filesystem errors.
- Open Terminal (from the Utilities menu in Recovery).
- Rebuild the kernel cache by typing:
kmutil install --update-all
Press Enter. Wait for it to finish. This rebuilds the cache for the current macOS version. - If that fails, try:
kmutil create -n boot -B /System/Volumes/Preboot
This forces a fresh creation of the boot kernel collection. - Restart the Mac normally.
If the error persists after rebuilding, you may need to reinstall macOS (without erasing your data) using the “Reinstall macOS” option in Recovery. This preserves your files and apps while replacing system files.
What If You Can’t Boot Into Recovery?
If Recovery Mode itself fails, try these alternatives:
- Safe Mode: On Apple Silicon, shut down, then press and hold the power button, then click “Options” and hold Shift while clicking “Continue.” On Intel, restart and hold Shift. Safe Mode loads a minimal kernel and may bypass the cache error.
- Startup Disk selection: If you have another Mac, you can use Target Disk Mode (Intel) or Mac Sharing Mode (Apple Silicon) to access the disk and run
kmutilfrom the other Mac’s Terminal. - Internet Recovery: On Intel, hold Command+Option+R at startup to load Recovery over the internet. On Apple Silicon, you can use the “Options” button and choose “Recovery” from a network source if available.
Preventing Future Kernel Cache Errors
To reduce the chances of this happening again:
- Always let macOS updates finish completely before shutting down.
- Keep at least 15-20 GB of free space on your startup disk.
- Avoid installing third-party kexts unless absolutely necessary. If you do, make sure they are signed and compatible with your macOS version.
- Use
csrutil statusin Recovery to check if System Integrity Protection (SIP) is enabled. If you disabled it, re-enable it withcsrutil enable.
Common Misconceptions
Some users think the error means their hard drive is dying. While disk failure can cause boot errors, the “kernel cache” message specifically points to a software issue. It is rarely a hardware problem unless you also see SMART errors or unusual noises. Also, resetting NVRAM (Intel) or SMC does not fix this error because it does not affect the Preboot volume’s cache files.
Frequently Asked Questions
Will I lose my data if I rebuild the kernel cache?
No. Rebuilding the cache only rewrites system files in the Preboot volume. Your personal files, apps, and settings remain untouched. Even reinstalling macOS via Recovery preserves your data, though it’s always wise to have a backup.
What is the exact command to rebuild the kernel cache?
The most common command is kmutil install --update-all run from Terminal in Recovery Mode. For a more forceful rebuild, use kmutil create -n boot -B /System/Volumes/Preboot. Both require administrator privileges, which Recovery Mode provides.
Can I fix this without Recovery Mode?
If you can boot to the login screen, you can open Terminal (from Utilities) and run the same kmutil commands with sudo. However, if the error prevents booting, Recovery Mode is the only way.
Why does this happen after a macOS update?
Updates replace system files, and if the process is interrupted (power loss, forced restart, low disk space), the new kernel cache may not be built correctly. The update process usually rebuilds the cache automatically, but a failure leaves it incomplete.
Is this error related to FileVault?
Sometimes. If FileVault is enabled and the Preboot volume’s encryption keys are out of sync, the system may fail to load the cache. Running First Aid and rebuilding the cache usually resolves it. If not, you may need to disable FileVault temporarily, but do so only with a backup.
What if the error says “kernel cache is not valid” specifically?
That message usually means the cache file is corrupted or the signature is invalid. The same kmutil install --update-all command should regenerate a valid cache. If it still fails, try erasing the Preboot volume’s cache folder (via Terminal) and then rebuilding, but only if you are comfortable with command line.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Move Data to a New Samsung Galaxy Phone
- Pixel C vs Surface Pro: Key Differences
- iPhone X vs iPhone: Key Differences Explained
- Chromebook Won’t Charge: How to Fix
- How to Delete Photos on Google Drive
- Firefox Bookmark Management Tips & Tricks