You can run Malwarebytes alongside Windows Defender, and doing so is generally safe and beneficial because Malwarebytes is designed to complement, not replace, your primary antivirus. However, you need to configure a few settings to avoid performance conflicts and duplicate scanning. This guide explains how the two programs interact, what to set up before installing, and common pitfalls to avoid.
How Malwarebytes and Windows Defender Work Together
Windows Defender (now called Microsoft Defender Antivirus) is the built-in antivirus that runs in real time on Windows 10 and 11. It protects against traditional malware, viruses, and phishing. Malwarebytes, on the other hand, started as an on-demand scanner that specializes in adware, spyware, and potentially unwanted programs (PUPs). The current version also includes real-time protection, but it is engineered to work alongside other antivirus tools rather than replace them.
When both are active, they each use their own scanning engines and signature databases. Windows Defender focuses on known threats and system-wide protection, while Malwarebytes excels at detecting browser hijackers, malicious extensions, and fileless attacks. Running both gives you a wider net, but you must ensure they don’t scan the same files at the same time, which can slow down your system.
What Happens During Installation?
When you install Malwarebytes on a system that already has Windows Defender enabled, the installer usually detects the existing antivirus and does not disable it. It may prompt you to enable a free trial of Malwarebytes Premium, which includes real-time protection. If you decline, you get the free version that only scans on demand. The free version does not add any background protection, so it won’t interfere with Defender at all.
If you accept the trial, Malwarebytes activates its real-time protection. This adds a second layer of active defense. In most cases, Windows Defender remains active and both run side by side. However, some Windows versions may show a notification that Defender is turned off if Malwarebytes registers itself as the primary antivirus. This is not a conflict; it’s just Windows recognizing that another security product is present.
Potential Conflicts and How to Avoid Them
The most common issue is performance degradation. Both programs may try to scan the same file simultaneously, causing high CPU or disk usage. To avoid this, you can set exclusions:
- In Windows Defender, add the Malwarebytes installation folder and its main processes to the exclusion list.
- In Malwarebytes, add the Windows Defender folder (usually C:\ProgramData\Microsoft\Windows Defender) to its exclusion list.
Another conflict is that Malwarebytes might flag a Windows Defender update file as a false positive, or vice versa. This is rare but possible. If you see a detection that you believe is false, you can restore the file and add it to the exclusion list in both programs.
Some users report that Windows Defender’s real-time protection turns off after installing Malwarebytes. This can happen if Malwarebytes is set to register as the default security provider. To keep both active, go to Malwarebytes Settings and look for a toggle that says “Register with Windows Security Center” or similar. Disable that option so Windows Defender remains the primary AV.
Should You Use Both or Just One?
For most users, running both is overkill but not harmful. Windows Defender alone is adequate for typical home use, especially if you practice safe browsing habits. Malwarebytes adds value if you frequently download files from the internet, use peer-to-peer software, or visit less reputable sites. Its strength lies in catching potentially unwanted programs that Defender might ignore.
If you have a low-end PC with limited RAM, running two real-time scanners can slow things down. In that case, consider using Malwarebytes as an on-demand scanner only. You can run a manual scan weekly or monthly to catch anything Defender missed.
For power users who want maximum protection, the combination is fine as long as you set exclusions. Enterprise environments often use multiple layers of defense, but for home use, simplicity is usually better.
Common Problems and Troubleshooting
Here are a few issues you might encounter and how to fix them:
- High CPU usage: If your system becomes sluggish, open Task Manager and see which process is using the most CPU. If it’s either Defender or Malwarebytes, check if a scan is running. You can schedule scans at times when you’re not using the computer.
- Malwarebytes won’t update: This can happen if Windows Defender blocks the update server. Temporarily disable real-time protection in Defender, update Malwarebytes, then re-enable it.
- False positives: If Malwarebytes flags a legitimate file, submit it to Malwarebytes for analysis or add it to the exclusion list. Similarly, if Defender flags a Malwarebytes file, add it to Defender’s exclusions.
- Defender gets disabled: As mentioned, this is usually because Malwarebytes is set as the primary AV. Go to Malwarebytes Settings and uncheck the option to register with Windows Security Center.
Cost and Free vs Premium
Malwarebytes offers a free version that includes on-demand scanning and removal. The Premium version adds real-time protection, ransomware protection, and scheduled scans. The free version is sufficient if you already have Windows Defender. You can run a manual scan with Malwarebytes whenever you suspect an infection. The Premium trial is tempting, but after the trial ends, you’ll need to decide whether to pay or revert to free. Many users find that Defender plus the free version of Malwarebytes is enough.
Windows Defender is completely free and built into Windows. There is no reason to disable it, even if you install another antivirus. The key is to avoid running two full-featured antivirus suites that both have real-time protection, as that can cause conflicts. Malwarebytes is designed to be a secondary scanner, so it’s a good choice to pair with Defender.
Alternatives to Malwarebytes
If you’re looking for a secondary scanner, other options include:
- AdwCleaner: A free tool from Malwarebytes that focuses on adware and browser hijackers. It’s portable and doesn’t run in the background.
- HitmanPro: A cloud-based scanner that checks files against multiple antivirus engines. It’s not free for real-time protection but has a free trial.
- ESET Online Scanner: A free one-time scan tool that you can run manually.
These tools are all on-demand, so they won’t conflict with Defender. The advantage of Malwarebytes over these is its active protection and regular updates, but the free version is on-demand only.
Frequently Asked Questions
Will Malwarebytes slow down my computer if I have Windows Defender?
It can, especially if both are scanning at the same time. To minimize impact, set exclusions in both programs and schedule scans during idle times. The free version of Malwarebytes only scans when you manually run it, so it won’t affect performance otherwise.
Do I need to uninstall Windows Defender before installing Malwarebytes?
No. In fact, you shouldn’t. Windows Defender is part of Windows and cannot be fully uninstalled. Malwarebytes is designed to work alongside it. Uninstalling Defender would leave your system unprotected.
Which one should I use for real-time protection?
Windows Defender is sufficient for most users. If you want extra protection, you can enable Malwarebytes Premium’s real-time protection, but you must ensure they don’t conflict. If you notice issues, disable Malwarebytes’ real-time protection and rely on Defender.
Can Malwarebytes detect viruses that Windows Defender misses?
Yes, because Malwarebytes uses a different detection engine and focuses on different types of threats, such as adware and PUPs. However, no single tool catches everything. Running both gives you broader coverage.
Is it safe to have both programs set to start with Windows?
Yes, it’s safe, but it may increase boot time. You can disable Malwarebytes from starting at boot if you only use it for manual scans. Go to Malwarebytes Settings and turn off “Start at startup” if you don’t need real-time protection.
What should I do if Windows Defender says Malwarebytes is a threat?
This is a false positive. Add Malwarebytes to Windows Defender’s exclusion list. Go to Windows Security > Virus & threat protection > Manage settings > Exclusions, and add the Malwarebytes installation folder. Then run a scan with Malwarebytes to ensure it’s not actually infected.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Show User Library in macOS High Sierra & Sierra
- Device Manager Shortcut: Windows 10 Desktop
- How to Remove Forgotten Passcode from iPhone
- Fix Slow Wi-Fi Problem iPhone X: 9 Steps
- How to Check if a Candidate Accepts Crypto Donations
- How to Listen to Deleted Voicemails on iPhone