sodcalculator

10 Tech How-To

Microsoft Error Code 0x800704cf: Fix Network Issues

Guide 10-58508 · Updated · Step by step

Microsoft error code 0x800704cf appears when Windows cannot reach a network location, often a mapped drive, NAS, or another PC on your local network. The fix usually involves resetting the network connection, checking firewall rules, or re-entering credentials. Below is a practical guide to resolving this error on current versions of Windows 10 and Windows 11.

What Does Error 0x800704cf Mean?

This error is a Windows networking error that translates to “The network location cannot be reached.” It typically occurs when you try to open a shared folder, map a network drive, or access a device on your local network. The error can appear for several reasons:

  • The remote computer is turned off or asleep.
  • The network path is incorrect or the share name has changed.
  • Firewall or security software is blocking the connection.
  • Network discovery or file sharing is disabled.
  • Your PC’s network profile is set to “Public” instead of “Private.”
  • The SMB (Server Message Block) protocol version is mismatched.

Understanding the cause is the first step, because the fix differs depending on whether the issue is on your PC, the remote device, or the network itself.

Quick Fixes to Try First

Before diving into deeper troubleshooting, try these simple steps—they resolve a surprising number of cases:

  1. Restart both devices. Reboot your PC and the device hosting the share (NAS, another PC, etc.). This clears temporary glitches.
  2. Check the network path. Verify the path is typed correctly. For example, \\192.168.1.10\sharedfolder must match the actual IP and share name.
  3. Ping the remote device. Open Command Prompt and type ping . If you get no reply, the device is unreachable—check its network connection.
  4. Try accessing by IP instead of hostname. Sometimes DNS or NetBIOS name resolution fails. Use the IP address directly.
  5. Disable and re-enable your network adapter. In Settings > Network & Internet > Advanced network settings, click “Network reset” (Windows 10/11) or disable/enable the adapter in Control Panel.

If none of these work, move on to the more specific fixes below.

Adjust Network Profile and Discovery Settings

Windows treats networks as either “Private” or “Public.” On a Public network, file sharing and network discovery are often blocked by default, which can trigger error 0x800704cf.

  • Go to Settings > Network & Internet > Wi-Fi (or Ethernet).
  • Click your connected network and set the network profile to Private (if you trust the network).
  • Open Control Panel > Network and Sharing Center > Advanced sharing settings.
  • Turn on Network discovery and File and printer sharing for the current profile.

If you’re on a domain or a corporate network, these settings might be managed by group policy, so you may need to contact your IT admin.

Check Firewall and Security Software

Windows Defender Firewall or third-party antivirus can block SMB traffic (ports 445, 139, 138, 137). To test, temporarily disable the third-party firewall (if you have one) and see if the error disappears. If it does, add an exception for file and printer sharing.

For Windows Defender Firewall:

  1. Open Control Panel > Windows Defender Firewall.
  2. Click Allow an app or feature through Windows Defender Firewall.
  3. Ensure File and Printer Sharing is checked for both Private and Public (or at least Private).
  4. If it’s not in the list, click “Allow another app” and add C:\Windows\System32\svchost.exe with the service “File and Printer Sharing.”

Also verify that the remote device’s firewall isn’t blocking incoming connections. On the remote PC, check the same settings.

Re-enter Credentials and Clear Stored Logins

Sometimes Windows caches old credentials that are no longer valid, causing access to fail with this error. To fix:

  1. Open Control Panel > Credential Manager.
  2. Under Windows Credentials, find any entries for the remote computer (e.g., 192.168.1.10 or server-name).
  3. Remove them.
  4. Try accessing the share again—Windows will prompt for new credentials.

If the remote device requires a specific username (like a NAS admin), make sure you use the correct format: DeviceName\Username or IP\Username.

Verify SMB Protocol Settings

SMB (Server Message Block) is the protocol Windows uses for file sharing. If the remote device uses an older SMB version (e.g., SMBv1) and your Windows has it disabled, you’ll get this error. To check and enable SMBv1 (not recommended for security reasons, but sometimes necessary for older NAS devices):

  1. Open Control Panel > Programs > Turn Windows features on or off.
  2. Find SMB 1.0/CIFS File Sharing Support and check it.
  3. Restart your PC.

However, SMBv1 is outdated and insecure. If possible, update the firmware on the remote device to support SMBv2 or SMBv3. For modern Windows 10/11, SMBv2/3 is enabled by default.

Use Command-Line Tools to Diagnose

If the error persists, use these built-in tools to pinpoint the issue:

  • net view \\ – Lists shared folders on the remote device. If this fails, the device isn’t reachable or sharing is disabled.
  • net use * /delete – Clears all mapped drives (do this if you have stale mappings).
  • ipconfig /flushdns – Clears the DNS cache, which can help if hostname resolution is failing.
  • nbtstat -R – Purges the NetBIOS name cache.

If net view shows an error, the problem is likely on the network or the remote device, not your PC.

Frequently Asked Questions

Why does error 0x800704cf appear when I try to map a network drive?

It usually means the share is not accessible from your PC. Check that the remote device is on, the share name is correct, and your credentials have permission. Also ensure your network profile is set to Private.

Can a VPN cause this error?

Yes. If you’re connected to a VPN, your traffic may be routed through a different network interface, making local network shares unreachable. Disconnect the VPN and try again.

Does this error occur on Windows 11 as well?

Yes, error 0x800704cf appears on both Windows 10 and Windows 11. The troubleshooting steps are essentially the same.

Is there a way to avoid this error in the future?

Keep your network profile set to Private for trusted networks, ensure network discovery is on, and regularly clean up stored credentials in Credential Manager. Also, make sure the remote device’s IP address doesn’t change (use a static IP or update the mapping).

What if I still get the error after trying all these fixes?

If none of the steps work, the issue may be with the remote device’s configuration or the network itself. Try accessing the share from another PC to isolate the problem. If it works from another PC, your Windows installation may have a corrupted network stack—run netsh winsock reset and netsh int ip reset in an elevated Command Prompt, then restart.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →