If your Microsoft Wireless Display Adapter is not working in Windows 10, the fix usually involves updating the adapter’s firmware, updating your PC’s Wi-Fi and graphics drivers, and resetting the adapter itself. This article walks through the most common causes and step-by-step solutions to get your screen mirroring again.
Background: What the Microsoft Wireless Display Adapter Does
The Microsoft Wireless Display Adapter is a small HDMI dongle that lets you mirror or extend your Windows 10 PC screen to a TV or monitor without cables. It uses Miracast, a wireless display standard built into Windows. The adapter plugs into an HDMI port and is powered via USB. Once set up, your PC can connect to it just like it connects to a Wi-Fi network.
Windows 10 has supported Miracast since version 1607, and the feature is called “Connect” or “Wireless Display” depending on your PC’s manufacturer. The adapter itself is not a Chromecast or an AirPlay receiver; it only works with devices that support Miracast, which includes most Windows 10 laptops and tablets, but not all desktops unless they have a compatible Wi-Fi adapter.
How Miracast Works and Why It Fails
Miracast creates a direct peer-to-peer Wi-Fi connection between your PC and the adapter. It does not use your home network router for the video stream. This is important because many connection problems are caused by Wi-Fi interference or by your PC’s Wi-Fi adapter not supporting the required protocols.
Common failure points include:
- Outdated firmware on the adapter itself.
- Older Wi-Fi drivers on your PC that don’t handle Miracast well.
- Graphics driver issues that prevent the video encoding.
- HDMI port or cable problems on the TV.
- Power saving settings that turn off the Wi-Fi adapter or the display output.
- Windows 10 version that has known Miracast bugs.
If the adapter is not detected at all, or if the connection drops after a few seconds, the cause is usually one of these. Let’s go through the fixes in order of likelihood.
Step-by-Step Fixes for a Non-Working Adapter
Try these in order. Most users find the fix in the first few steps.
- Restart the adapter. Unplug the USB power cable from the adapter, wait 10 seconds, and plug it back in. Wait for the adapter’s LED to show it’s ready (usually a steady white or blinking light).
- Restart your PC. A full shutdown (not just sleep) can clear temporary network and graphics glitches.
- Check the HDMI input. Make sure the TV is set to the correct HDMI port. Try a different HDMI port if available.
- Update the adapter’s firmware. Microsoft provides a firmware update tool for the adapter. Download it from the official Microsoft support page, plug the adapter into your PC via USB (the adapter has a micro-USB or USB-C port for this), and run the tool. This is the most common fix for persistent connection drops.
- Update your PC’s Wi-Fi driver. Open Device Manager (right-click Start), expand “Network adapters,” right-click your Wi-Fi adapter, and choose “Update driver.” Select “Search automatically.” If that doesn’t find a new driver, check your PC manufacturer’s support site for the latest driver.
- Update your graphics driver. In Device Manager, expand “Display adapters,” right-click your GPU, and update the driver. For Intel, AMD, or NVIDIA, you can also use their automatic detection tools.
- Run the Windows 10 “Connect” app. Press Win+K to open the Connect panel. If your adapter appears, select it. If not, try the next step.
- Reset the adapter. Some versions have a small reset button (pinhole) on the side. Press and hold it for about 10 seconds with a paperclip. This restores factory settings. You’ll need to set it up again from scratch.
If none of these work, the adapter may be faulty, but before replacing it, try the advanced troubleshooting below.
Advanced Troubleshooting: Wi-Fi and Power Settings
Miracast is sensitive to Wi-Fi interference. If you have a dual-band router, make sure your PC is on the 5 GHz band, not 2.4 GHz. The adapter itself creates its own network, but your PC’s Wi-Fi radio is also used for the connection. If your PC is connected to a 2.4 GHz network, it may conflict with the Miracast signal.
Power saving settings can also break the connection. In Windows 10, go to Settings > System > Power & sleep and set both “On battery power” and “When plugged in” to “Never” for the display and sleep timers while you test. Also, in Device Manager, right-click your Wi-Fi adapter, go to Power Management, and uncheck “Allow the computer to turn off this device to save power.”
Another common issue is that the adapter’s HDMI connection is not receiving enough power. The adapter is powered by a USB cable. If you plug that USB into a TV’s USB port, it may not provide enough power. Use the included power adapter and plug it into a wall outlet instead.
Finally, check that your PC’s Wi-Fi adapter supports Miracast. Open a Command Prompt and type netsh wlan show drivers. Look for “Supported Wireless Display: Yes.” If it says “No,” your hardware doesn’t support Miracast, and no software fix will make it work.
When the Adapter Is Detected but the Connection Fails
If your PC sees the adapter but the connection fails or drops after a few seconds, the problem is often the graphics driver or the video encoding. Try these:
- Lower the screen resolution on your PC to 1080p or 720p before connecting. The adapter supports up to 1080p (and 4K on newer versions), but if your PC is outputting a higher resolution, it may overwhelm the adapter.
- Close any apps that use heavy graphics (games, video players) before connecting.
- Disable hardware acceleration in your browser if you’re mirroring a browser window.
- Update the adapter’s firmware again after updating your graphics driver – sometimes the order matters.
If the connection works but the video is choppy, try moving the adapter and your PC closer together. The effective range is about 30 feet, but walls and other electronics reduce that.
Alternatives to the Microsoft Wireless Display Adapter
If the adapter is beyond repair or you want a different experience, consider these alternatives:
- Chromecast – Works with Chrome browser and Android, but not natively with Windows 10 Miracast.
- Amazon Fire TV Stick – Has Miracast support on some models, but it’s not guaranteed.
- Roku – Supports screen mirroring from Windows 10 via Miracast on most models.
- Wired HDMI cable – The most reliable and cheapest option if you don’t need wireless.
- Other Miracast dongles – Many third-party adapters work with Windows 10, but check reviews for compatibility.
Before buying a replacement, note that Windows 10’s Miracast support is mature, so any Miracast-certified adapter should work. The Microsoft adapter is not the only option.
Frequently Asked Questions
Why does my Microsoft Wireless Display Adapter keep disconnecting?
This is usually caused by outdated firmware on the adapter or Wi-Fi interference. Update the firmware using the Microsoft tool, and move your PC closer to the adapter. Also, make sure your PC’s Wi-Fi driver is up to date.
Can I use the adapter with a PC that doesn’t have Wi-Fi?
No. Miracast requires a Wi-Fi adapter that supports the feature. If your desktop PC has no Wi-Fi, you cannot use the adapter. You could add a USB Wi-Fi adapter that supports Miracast, but not all do.
How do I update the firmware on the Microsoft Wireless Display Adapter?
Download the “Microsoft Wireless Display Adapter firmware update tool” from the official Microsoft support website. Plug the adapter into your PC via USB, run the tool, and follow the on-screen instructions. The adapter’s LED will blink during the update.
Does the adapter work with Windows 11?
Yes, the adapter works with Windows 11 because it uses the same Miracast standard. The troubleshooting steps are similar. However, if you’re having issues on Windows 11, check for a firmware update and ensure your Wi-Fi drivers are current.
Why is there no sound when I mirror my screen?
Sound should transmit over Miracast, but if it doesn’t, check your PC’s audio output settings. Right-click the speaker icon, select “Open Sound settings,” and under “Output,” choose the adapter (it usually appears as “Digital Output” or similar). If it’s not there, restart the connection.
Can I use the adapter to mirror a second monitor, not just a TV?
Yes, if the monitor has an HDMI port and supports HDCP (most do). The adapter will appear as a second display in Windows. You can choose to duplicate or extend your desktop.
Conclusion
The Microsoft Wireless Display Adapter is a reliable way to mirror your Windows 10 screen, but it’s not immune to issues. Start with the simple fixes: restart everything, update firmware, and update drivers. If that fails, check your Wi-Fi adapter’s Miracast support and power settings. In most cases, a firmware update resolves persistent problems. If you’ve tried all the steps and it still doesn’t work, the adapter may be defective, but before buying a new one, test it on another TV or PC to rule out other causes.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Move Data to a New Samsung Galaxy Phone
- Pixel C vs Surface Pro: Key Differences
- iPhone X vs iPhone: Key Differences Explained
- Chromebook Won’t Charge: How to Fix
- How to Delete Photos on Google Drive
- Firefox Bookmark Management Tips & Tricks