If your Outlook favorites (the starred folders at the top of the navigation pane) have disappeared, the cause is almost always a hidden setting, a corrupted navigation pane, or a sync glitch—not deleted emails. You can usually restore them in under a minute by re-enabling the Favorites section, resetting the navigation pane, or recreating the folder shortcuts.
Formula
The volume of a rectangular lawn in cubic yards is:
Volume (yd³) = Length (ft) × Width (ft) × Depth (in) ÷ 324
For cubic feet:
Volume (ft³) = Length (ft) × Width (ft) × Depth (in) ÷ 12
Variables:
- Length (l) – the lawn’s length in feet (ft)
- Width (w) – the lawn’s width in feet (ft)
- Depth (d) – the depth of soil, compost, or mulch in inches (in)
The 324 factor comes from converting inches to feet (÷12) and then cubic feet to cubic yards (÷27): 12 × 27 = 324. The 12 factor in the second formula converts inches to feet for a cubic feet result.
Worked Example
Using the default values from the calculator (length = 40 ft, width = 25 ft, depth = 3 in):
- Calculate the volume in cubic feet: 40 × 25 × 3 ÷ 12 = 3000 ÷ 12 = 250 ft³
- Convert to cubic yards: 250 ÷ 27 = 9.259 yd³
The calculator’s first output shows 9.26 yd³ (rounded to 2 decimals), and the second shows 250 ft³. This matches the manual calculation.
When to Use This Calculator
Use this calculator when you need to order topsoil, compost, mulch, or other bulk materials for a rectangular lawn or garden bed. Suppliers often sell these materials by the cubic yard, so knowing the volume helps you estimate how much to order. It’s also useful for planning raised beds, filling planters, or calculating the amount of fill needed for a sunken area.
If your lawn is not a perfect rectangle, break it into rectangular sections, calculate each, and add the volumes together. For oddly shaped areas, you can approximate with a rectangle that encloses the shape—just be aware you’ll overestimate slightly.
How to Read the Result
The headline result is in cubic yards, which is the standard unit for bulk soil and mulch in the US. For example, 9.26 yd³ means you need about 9.26 cubic yards of material. In practice, you’ll likely round up to the next whole yard because suppliers deliver in whole yards. The second output, cubic feet, is useful for smaller quantities sold in bags (e.g., 2-cubic-foot bags).
Remember that the depth you enter is the desired depth of material, not the depth of the existing soil. If you’re adding a layer of mulch, measure the depth you want (usually 2–4 inches). For filling a hole, the depth is the hole’s depth.
Common Mistakes
- Mixing units: Length and width must be in feet; depth must be in inches. If you measure in meters, convert to feet first (1 m = 3.28084 ft).
- Forgetting to divide by 27: The formula already accounts for the conversion, but if you calculate cubic feet first and then divide by 27, you’ll get the same result. The 324 factor combines both conversions.
- Rounding too early: Round only at the final step to avoid small errors. The calculator rounds to 2 decimals for cubic yards, which is sufficient for ordering.
Limits of the Formula
This formula assumes a flat, rectangular area with uniform depth. Real lawns may have slopes or irregular shapes, which will change the actual volume needed. For slopes, you may need more material to achieve an even surface. Also, soil and mulch compact over time, so you may need to add extra (typically 10–20%) if you want the final depth after settling. The calculator does not account for compaction—it gives the theoretical volume for the given dimensions.
Frequently Asked Questions
Why are my favorites missing from Outlook?
The most common reason is that the Favorites section is simply hidden. Go to View → Layout (or View → Folder Pane) and check “Favorites.” If it’s already checked, try unchecking and rechecking it. Another cause is a corrupted navigation pane, which can be fixed by resetting the view (View → Reset View) or using the /resetnavpane command-line switch.
How do I add a folder to Favorites in Outlook?
Right-click on any folder in the navigation pane and select “Add to Favorites.” You can also drag the folder to the Favorites section. To remove, right-click the favorite and choose “Remove from Favorites.” This does not delete the actual folder or its emails.
Will my emails be deleted if I remove a favorite?
No. Favorites are just shortcuts. Removing a favorite only removes the shortcut from the Favorites list; the original folder and its contents remain untouched.
My favorites disappeared after an update. What should I do?
After an Outlook update, the navigation pane may reset. Try re-enabling Favorites as described above. If that fails, close Outlook and run it with the /resetnavpane switch (Win+R, type “outlook.exe /resetnavpane”, press Enter). This resets the navigation pane to default, which usually restores the Favorites section, but you may need to re-add your custom favorites.
Can I back up my Favorites list?
Yes, but it’s not straightforward. Favorites are stored in the Windows Registry under HKEY_CURRENT_USER\Software\Microsoft\Office\
Why do my favorites show but not work?
If favorites appear but clicking them does nothing, the underlying folder may have been moved or renamed. Right-click the favorite and choose “Properties” to see the target path. If it’s incorrect, remove and re-add the favorite from the correct folder.
Related
Formula used
in l | Lawn length | ft | 40 | 0 | 100000 in w | Lawn width | ft | 25 | 0 | 100000 in d | Depth | in | 3 | 0 | 120 out yd | Volume | yd³ | l * w * d / 324 | 2 out ft3 | Volume | ft³ | l * w * d / 12 | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More in this bed
- How to Make a Mask on Snapchat: Step-by-Step
- How to Factory Reset iPad If You Forgot Password
- Ubuntu in Windows Store: Which Editions Work?
- Secure Guest Account on Windows 11: Step-by-Step
- Stop Outlook From Changing Hyperlink Font
- Hiberfil.sys: What It Is & How to Delete It