Logitech MX Keys Mini Bluetooth Pairing & Channel Switching

To pair a Logitech MX Keys Mini via Bluetooth, put the keyboard in pairing mode by holding the Easy-Switch key (1, 2, or 3) for three seconds until its LED blinks rapidly, then select “Logi MX Keys Mini” in your device’s Bluetooth settings. To switch between paired devices, tap the same Easy-Switch key (1, 2, or 3) to instantly jump to that device’s connection. This guide covers the full pairing process for Windows, Mac, iPad, and Android, plus how to manage channels, troubleshoot connection drops, and use the Logi Options+ software.

What the Easy-Switch Keys Do

Each of the three Easy-Switch keys on the top row of the MX Keys Mini is a dedicated Bluetooth channel. You can pair the keyboard with up to three separate devices—one per key. Pressing a key once switches the keyboard to that channel, and the LED above the key lights up briefly to confirm. The keyboard remembers which device is paired to each key, so you don’t need to re-pair when you switch back.

This design is meant for people who work across a desktop PC, a laptop, and a tablet or phone. Instead of unplugging a USB receiver or going into settings each time, you just tap a key. The switch takes about one second, and the keyboard will reconnect to the last active device on that channel automatically.

Pairing for the First Time

Before you start, make sure the keyboard is charged (the battery LED on the right side of the Esc key blinks red when low). Then follow these steps for your device:

Turn on the keyboard with the power switch on the top edge (slide it toward the right).
Choose an Easy-Switch key (1, 2, or 3) that you want to use for this device.
Hold that key for three seconds. The LED above it will start blinking rapidly—this means the keyboard is discoverable.
On your computer or tablet, open Bluetooth settings and search for new devices.
Select “MX Keys Mini” (or “Logi MX Keys Mini”) from the list.
If a PIN appears on screen, type it on the keyboard and press Enter. If not, the pairing will complete automatically.

After pairing, the LED stops blinking and stays lit for a couple of seconds. The keyboard is now connected to that device and assigned to that Easy-Switch key.

Connecting via Logi Bolt USB Receiver

The MX Keys Mini also works with the Logi Bolt USB receiver (sold separately or included with some bundles). If you have a Bolt receiver, plug it into a USB-A or USB-C port (depending on the model). To pair the keyboard with the receiver, open the Logi Options+ software, go to “Add devices,” choose “Logi Bolt,” and follow the on-screen instructions. Alternatively, you can use the Logi Bolt pairing utility from Logitech’s website.

Using the Bolt receiver frees up a Bluetooth channel, so you can have three Bluetooth devices plus the receiver—though the keyboard only has three Easy-Switch keys, so you’ll need to assign the receiver to one of them. The receiver offers a more stable connection in crowded wireless environments and is often recommended for office use.

Switching Between Devices

Once you have two or three devices paired, switching is simply a matter of tapping the corresponding Easy-Switch key. For example, if your PC is on channel 1, your MacBook on channel 2, and your iPad on channel 3, pressing “2” will move the keyboard to the MacBook. The LED above the key flashes briefly, and the keyboard reconnects.

If a device was turned off or out of range, the keyboard will keep trying to reconnect for a few seconds. If it fails, tap the key again to force a reconnection. Note that the keyboard can’t be connected to two devices at the same time—it’s one active channel at a time.

For users who switch frequently, the Logi Options+ software (available for Windows and macOS) lets you assign custom actions to the Easy-Switch keys, such as launching an app or pasting text. However, the basic channel switching works without any software installed.

Using Logi Options+ for Advanced Management

Logi Options+ is Logitech’s configuration tool for recent peripherals. It’s not required for basic Bluetooth pairing, but it adds useful features:

See battery level and connection status for each Easy-Switch channel.
Remap keys (including the top row function keys) to different actions.
Enable Flow, which lets you move the mouse cursor between computers and have the keyboard follow automatically.
Update firmware for the keyboard and receiver.
Adjust backlighting behavior (the keyboard has a proximity sensor that lights up keys when your hands approach).

To pair via Options+, install the software, then go to “Add devices” and select “Set up new device.” The software will guide you through either Bluetooth or Bolt pairing. If you already paired via Bluetooth, the software will detect the keyboard and show it in the device list.

Troubleshooting Common Pairing and Switching Issues

If the keyboard won’t pair or switch reliably, try these steps in order:

Charge the keyboard. A low battery can cause intermittent disconnects. Plug in the included USB-C cable and wait 15 minutes.
Turn the keyboard off and on. Slide the power switch off, wait 10 seconds, then slide it back on.
Delete the device from your computer’s Bluetooth list. Then re-pair from scratch (hold the Easy-Switch key for 3 seconds).
Move closer to the device. Bluetooth range is about 10 meters (30 feet), but walls and metal objects reduce it.
Check for interference. Other 2.4 GHz devices (Wi-Fi routers, USB 3.0 hubs, microwave ovens) can cause dropouts. Try moving the receiver or computer closer.
Update firmware. Use Logi Options+ to check for updates. Occasionally, Logitech fixes connectivity bugs via firmware.
If using a Bolt receiver, re-pair it. Unplug the receiver, plug it back in, and pair again via Options+.

If you’re switching between a Mac and a Windows PC, note that the keyboard uses different modifier key layouts (Option vs. Windows key). The physical keycaps show both symbols, but the keyboard automatically sends the correct signal for the connected device. If a key seems swapped, check the Logi Options+ settings under “Keys” to adjust the modifier mapping.

Frequently Asked Questions

Can I use the MX Keys Mini with a USB-C cable for a wired connection? Yes, but the USB-C port is only for charging, not for data. The keyboard cannot send keystrokes over the cable. You must use Bluetooth or the Logi Bolt receiver for input.

How do I know which channel is active? The LED above the active Easy-Switch key stays lit for a few seconds after switching. When you press a key, the LED blinks to confirm the switch. In Logi Options+, the active channel is highlighted in the device list.

Why does my keyboard keep disconnecting and reconnecting? This usually happens when the battery is low, the device is too far away, or there’s interference. Charge the keyboard, move closer, and try a different USB port for the receiver. Also, check that the device’s Bluetooth driver is up to date.

Can I pair the keyboard to a phone and a computer at the same time? No, the keyboard can only be actively connected to one device at a time. However, you can pair it to multiple devices and switch with the Easy-Switch keys. For example, pair to your phone on channel 1 and your laptop on channel 2, then tap to switch.

Does the MX Keys Mini work with Linux or Chrome OS? Yes, it works as a standard Bluetooth keyboard on Linux and Chrome OS. The basic keys and typing functions will work. However, Logi Options+ is not available for these platforms, so you won’t get custom key remapping or battery level notifications.

How many devices can I pair total? You can pair up to three devices via Bluetooth, plus one Logi Bolt receiver (which counts as one of the three Easy-Switch channels). So in practice, you can have three devices connected at a time—each assigned to a different Easy-Switch key.

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →