sodcalculator

10 Tech How-To

Purple Google Maps Icons: What They Mean & How to Tell

Tag 10-45727 · Updated · Standard formula, shown below

Volume 9.26 yd³
Volume
250.0 ft³
Result
Lawn length
40 ft
You entered
Lawn width
25 ft
You entered
You enter
Lawn length, Lawn width, Depth
You get
Volume, Volume
Rounding
2 dp · 1 dp

Purple icons on Google Maps mark places of interest that are currently trending or popular, such as restaurants, cafes, attractions, and shops. You can tell what a purple icon means by its shape and symbol, and by tapping it to see the place’s name, category, and current popularity data. This guide explains each purple icon type, how Google decides what gets highlighted, and how to use this feature effectively.

Formula

The formula to calculate the volume of soil, mulch, or other material needed for a rectangular area is:

Volume (yd³) = (Length × Width × Depth) / 324

Where:

  • Length = the length of the area in feet (ft)
  • Width = the width of the area in feet (ft)
  • Depth = the desired depth of material in inches (in)
  • 324 = the conversion factor (1 cubic yard = 27 cubic feet, and 12 inches = 1 foot, so 27 × 12 = 324)

The second output, cubic feet, uses the formula: Volume (ft³) = (Length × Width × Depth) / 12.

Worked Example

Using the default values from the calculator (Length = 40 ft, Width = 25 ft, Depth = 3 in):

  1. Multiply length and width: 40 ft × 25 ft = 1000 ft²
  2. Multiply by depth in inches: 1000 ft² × 3 in = 3000 ft²·in
  3. Divide by 324: 3000 / 324 = 9.26 yd³

So you need approximately 9.26 cubic yards of material. The calculator rounds to two decimal places, giving the same result.

When to Use This Calculator

Use this calculator when planning any project that involves filling a rectangular area with a material measured by volume—topsoil for a garden bed, mulch for landscaping, gravel for a path, or concrete for a small slab. It helps you estimate how much material to order, avoiding both shortages and excess. For irregular shapes, break the area into rectangles and calculate each separately, then sum the volumes.

How to Read the Result

The primary result is in cubic yards, the standard unit for bulk materials like soil and mulch in the US. Most suppliers sell by the cubic yard, so this number tells you how much to order. The secondary result in cubic feet is useful for smaller quantities or when comparing bagged material (which is often sold in cubic feet). Remember that bulk density varies—a yard of wet topsoil weighs more than a yard of dry mulch—so check with your supplier for weight limits if you’re hauling it yourself.

Common Mistakes

  • Mixing units: Ensure length and width are in feet and depth is in inches. If you measure depth in feet, the conversion factor changes (27 instead of 324).
  • Rounding too early: Round only the final result, not intermediate steps, to avoid significant errors.
  • Forgetting compaction: Some materials (like fill dirt) compact when settled. Order about 10-15% extra if compaction is a concern.
  • Assuming all areas are rectangles: For circular or triangular areas, use the appropriate geometric formulas before applying the depth conversion.

Limits of the Formula

This formula assumes a perfectly flat, rectangular area with uniform depth. Real-world projects often have slopes, uneven ground, or varying depths. It also doesn’t account for waste due to spillage or settling. For large or critical projects, consult a landscape professional who can assess on-site conditions. The calculator provides a solid estimate, not a guarantee.

Frequently Asked Questions

How many bags of mulch do I need if I know the cubic yards?

Bagged mulch is typically sold in 2 or 3 cubic foot bags. To find the number of bags, multiply your cubic yards by 27 (to get cubic feet) and divide by the bag size. For example, 9.26 yd³ × 27 = 250 ft³, so with 2 ft³ bags you’d need 125 bags. Always round up to ensure you have enough.

Can I use this calculator for concrete?

Yes, the volume calculation is the same. However, concrete is usually ordered by the cubic yard from a ready-mix company, and they may charge for partial yards. For small projects, you might buy pre-mixed bags (e.g., 60 lb or 80 lb)—check the bag for coverage per inch of depth, as it varies by mix.

What if my area is not a perfect rectangle?

Break the area into smaller rectangles, calculate each volume, and add them together. For triangles, use (base × height / 2) for the area, then multiply by depth and divide by 324 (or 12 for cubic feet). For circles, use π × radius² for the area.

Should I order extra material?

It’s wise to order 5-10% extra to account for settling, spillage, or uneven ground. For materials that compact (like soil), consider up to 15% extra. You can always use leftover material elsewhere in your yard.

What is the difference between cubic yards and cubic feet?

A cubic yard is 27 cubic feet (3 feet × 3 feet × 3 feet). This calculator gives both so you can compare bulk orders (yards) with bagged products (feet). For example, a standard pickup truck bed holds about 2-3 cubic yards.

Related

Formula used
in l | Lawn length | ft | 40 | 0 | 100000
in w | Lawn width | ft | 25 | 0 | 100000
in d | Depth | in | 3 | 0 | 120
out yd | Volume | yd³ | l * w * d / 324 | 2
out ft3 | Volume | ft³ | l * w * d / 12 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More in this bed

The whole Tech How-To bed →