Error 0x80070026 in Windows 11 stops file operations with the message “The specified disk or diskette cannot be accessed.” The fix usually involves checking disk health, clearing the Read-Only attribute, or repairing system files — start with the steps below in order.
What Causes Error 0x80070026
This error appears when Windows cannot read or write to a disk, USB drive, or memory card. The most common triggers are:
- A failing or corrupted storage device (bad sectors, physical damage)
- The drive is set to Read-Only, often from a physical switch or file system flag
- File system corruption (NTFS or FAT32 errors)
- Outdated or incompatible storage drivers
- Interference from third-party security software or disk utilities
It can happen on internal hard drives, SSDs, external drives, SD cards, and even network drives. The error code itself is generic — it does not tell you which device is at fault, so diagnosis matters.
Before You Start: Backup and Safety
If the drive contains important files, stop using it immediately. Continued read/write attempts can worsen corruption. If you can, copy data to another location before running repairs. For a failing drive, consider professional recovery — do not run chkdsk on a drive you suspect is physically dying, as it may accelerate damage.
Fix 1: Check the Drive’s Read-Only Status
Many external drives and SD cards have a physical lock switch. If it is in the locked position, Windows cannot write. Remove the drive, check the switch, and try again.
If the switch is fine, the file system may be flagged Read-Only. To clear it:
- Open Command Prompt as administrator (search “cmd”, right-click, “Run as administrator”).
- Type
diskpartand press Enter. - Type
list diskto see all drives. Note the number of your target drive. - Type
select disk X(replace X with the number). - Type
attributes disk clear readonlyand press Enter. - Exit with
exit.
If this fails with “Access is denied,” the drive may be hardware-locked or failing. On some USB drives, the controller itself enforces read-only — no software fix works.
Fix 2: Run CHKDSK to Repair File System Errors
CHKDSK scans for bad sectors and fixes logical errors. Run it on the affected drive:
- Open Command Prompt as administrator.
- Type
chkdsk X: /f /r(replace X with your drive letter) and press Enter. - If the drive is in use, you will be prompted to schedule a scan on restart — type Y and reboot.
Important: CHKDSK can take hours on large drives. Do not interrupt it. If it reports “unrecoverable errors,” the drive may be failing — back up what you can and replace it.
Fix 3: Use SFC and DISM to Repair System Files
Sometimes the error comes from corrupted Windows system files, not the drive itself. Run these two commands in an elevated Command Prompt:
sfc /scannow— scans and repairs protected system files. Wait for it to finish (may take 15–30 minutes).DISM /Online /Cleanup-Image /RestoreHealth— repairs the system image that SFC relies on. Run this after SFC if SFC found issues.
Restart after both complete and try the file operation again.
Fix 4: Update or Reinstall Storage Drivers
Outdated or buggy drivers can cause access errors. To update:
- Right-click the Start button and select “Device Manager”.
- Expand “Disk drives”.
- Right-click your drive and select “Update driver”.
- Choose “Search automatically for drivers”.
If no update is found, right-click the drive, select “Uninstall device”, then restart — Windows will reinstall the driver. Do this only for external drives or ones you can afford to temporarily lose.
What to Do If Nothing Works
If the error persists after all fixes, the drive is likely failing. Test it with a tool like CrystalDiskInfo (free) to check SMART status. If it shows “Caution” or “Bad”, replace the drive. For internal drives, try connecting it to another computer to rule out motherboard issues.
As a last resort, you can format the drive — but this erases all data. Only do this if you have backups or the data is not important.
Frequently Asked Questions
Can error 0x80070026 cause data loss?
Yes, if the drive is failing or the file system is corrupted, data can become inaccessible. Back up important files before attempting repairs.
Does this error mean my hard drive is dead?
Not necessarily. It often indicates a fixable file system issue or a Read-Only flag. But if CHKDSK reports physical errors, the drive may be failing.
Will formatting fix the error?
Formatting can clear file system corruption, but it will not fix physical damage. If the drive is failing, formatting may make it worse. Only format after confirming the drive is healthy.
Why does this error appear on a new USB drive?
New drives can be formatted with a file system Windows does not fully support (like exFAT on older systems) or have a factory Read-Only flag. Try reformatting to NTFS or FAT32 after backing up any included software.
Can I ignore this error if it only happens once?
If it happens once and the drive works fine afterward, it may be a temporary glitch. But if it recurs, treat it as a warning sign and back up your data.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Secure a Samsung Galaxy After a Zero-Day Disclosure
- What to Check Before Installing Linux Alongside Windows
- Fix OEM Activation Error 0xc004c060 in Windows 10
- Why Does My App Run One Query for the List and One per Item?
- Fix Google Chrome Has Stopped Working
- Fix Apps Not Downloading From Play Store