Shared listening on AirPods or Beats lets two people listen to the same audio from one iPhone or iPad. If it has stopped working, the fix is usually re-pairing the second device, turning Bluetooth off and on, or updating iOS. Below are the exact steps to get both sets of earbuds playing again.
What Is Shared Listening and How It Works
Shared listening (also called Audio Sharing) streams audio from one iPhone or iPad to two pairs of compatible wireless earphones simultaneously. It uses Bluetooth to connect the second pair to the same source device, not to the first pair. This means both sets receive the same audio stream in sync, and each user can control their own volume independently from the Control Center or the volume buttons on the earphones.
Compatible devices include AirPods (2nd generation and later), AirPods Pro (all generations), AirPods Max, Beats Fit Pro, Beats Solo Pro, Powerbeats Pro, and most recent Beats models. The source device must be an iPhone or iPad running iOS 13.1 or later, or iPadOS 13.1 or later. Both pairs must be connected to the same Apple ID for the quick pairing prompt to appear, though you can also share with a friend by holding the second pair near the source device.
Why Shared Listening Stops Working
The most common causes are Bluetooth interference, outdated firmware, or a temporary software glitch. Sometimes the second pair is not fully connected, or the source device has lost track of the first pair. Other times, the audio is playing from an app that does not support Audio Sharing, such as some older video apps or games. A low battery on either pair can also interrupt the connection, and if the earphones are in a case with the lid closed, they may be disconnected entirely.
Basic Fixes to Try First
- Check compatibility: Make sure both pairs are on the compatible list above and both are connected to the same iPhone or iPad.
- Turn Bluetooth off and on: Go to Settings > Bluetooth, toggle it off, wait 5 seconds, then toggle it back on. Reconnect both pairs.
- Restart the source device: A simple restart clears temporary Bluetooth glitches.
- Charge both pairs: Put each pair in its case with the lid open for at least 10 minutes, then try again.
- Update iOS: Go to Settings > General > Software Update and install any pending updates.
If these do not work, move to the next section for a deeper reset.
Re-Pairing the Second Pair (The Most Reliable Fix)
The most common reason shared listening fails is that the second pair is not actually connected to the source device. To re-pair it:
- Put the second pair in its case and close the lid.
- Open the case lid and hold the setup button on the back (for AirPods) or the side button (for Beats) until the LED flashes white.
- With the iPhone unlocked, hold the case near the phone and tap “Connect” when the animation appears.
- Now play audio from any app.
- Open Control Center (swipe down from the top-right on Face ID iPhones, or up from the bottom on older models).
- Tap the AirPlay icon (a triangle with concentric circles) in the Now Playing widget.
- Tap “Share Audio…” and hold the second pair near the phone, or select it from the list if it appears.
If the second pair does not appear, forget the device in Settings > Bluetooth, then re-pair it as new. This clears any corrupted pairing data.
What to Do If Only One Side Plays
If only one earbud from one of the pairs produces sound, the issue is usually with that specific earbud, not the sharing feature. Check that the earbud is clean and seated in your ear. If it is an AirPod, go to Settings > Bluetooth, tap the “i” next to your AirPods, and check the battery level. If one shows a very low charge, place both earbuds in the case for 15 minutes. For Beats, the same principle applies. If the problem persists, reset the earphones by holding the setup button for 15 seconds until the LED flashes amber, then white, and re-pair them.
When Shared Listening Still Fails
If you have tried all the above and it still does not work, the issue may be with the app you are using. Some apps, such as certain streaming services or video players, do not support Audio Sharing. Test with the Music app or a podcast app. If it works there, the app is the culprit. Also, check if both pairs are on the same Apple ID. If you are sharing with a friend, they must accept the invitation on their device. Finally, reset all Bluetooth settings on the iPhone: Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. This will erase saved Wi-Fi passwords and Bluetooth pairings, so you will need to re-pair everything, but it often resolves persistent Bluetooth issues.
Frequently Asked Questions
Can I share audio between AirPods and Beats?
Yes, as long as both are compatible with Audio Sharing. For example, you can share between AirPods Pro and Beats Fit Pro. The source device must be an iPhone or iPad, and both pairs must be connected to the same device.
Why is the Share Audio option grayed out?
This usually means the second pair is not connected to the iPhone. Make sure both pairs are connected via Bluetooth, and that the second pair is not in its case. If it is still grayed out, restart the iPhone and try again.
Does shared listening work with Android?
No. Audio Sharing is an Apple feature that works only between Apple devices. Android does not support it, though some Android phones have a similar feature called “Dual Audio” that works with certain Bluetooth speakers and earphones, but not with AirPods or Beats in the same way.
Can I share audio with more than two people?
No, Audio Sharing supports only two pairs of earphones at a time. You cannot add a third pair.
Why does the volume change on both pairs when I adjust one?
That is normal. The volume buttons on the source device control both pairs simultaneously. To adjust each pair individually, use the volume controls on the earphones themselves (e.g., swipe on the AirPods Pro stem or press the Beats volume rocker).
Will shared listening drain the battery faster?
Yes, because the iPhone is transmitting to two Bluetooth devices instead of one. Expect roughly 20-30% faster battery drain on the source device. The earphones themselves drain at their normal rate.
Preventing Future Issues
To avoid recurring problems, keep your earphones updated. AirPods and Beats update automatically when connected to an iPhone, but you can check by going to Settings > Bluetooth, tapping the “i” next to the device, and looking at the Firmware Version. If an update is available, it will install when the earphones are in the case and charging. Also, avoid using shared listening in areas with heavy Wi-Fi or Bluetooth congestion, such as crowded transit stations, as interference can cause dropouts. Finally, if you frequently share with the same person, make sure both pairs are saved to the same Apple ID so the connection prompt appears instantly.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Record Audio on Mac or PC
- Install LibreOffice 5 on Ubuntu: Step-by-Step
- Ways to Open Task Manager in Windows 11
- How to Fix a Slow and Lagging Windows 10 System
- Fix Dual Boot Option Not Showing on Windows
- Using Third-Party Navigation Apps on iPhone