If you see a “USB Driver Not Installed” or “Apple Mobile Device USB Driver missing” error in Windows Device Manager when you plug in an iPhone or iPad, the fix is usually to reinstall the Apple Mobile Device USB Driver through Device Manager or by reinstalling iTunes. This article explains why the driver disappears, how to fix it on Windows 10 and 11, and how to avoid it happening again.
What Is the Apple Mobile Device USB Driver?
The Apple Mobile Device USB Driver is a Windows driver that lets your PC communicate with an iPhone or iPad over a USB cable. It is installed automatically when you install iTunes or the Apple Devices app from the Microsoft Store. When the driver is missing or corrupted, Windows may show a yellow triangle in Device Manager, or you may get an error like “The device cannot start” or “USB Device Not Recognized.” This prevents your PC from seeing the phone, so you can’t sync, back up, or transfer photos.
Why the Driver Goes Missing
Several common situations cause the driver to vanish or stop working:
- You updated Windows and the update overwrote or removed the Apple driver.
- You uninstalled or updated iTunes, and the driver wasn’t reinstalled.
- Another USB driver conflict occurred after plugging in a different device.
- You plugged the iPhone into a USB 3.0 port that isn’t properly supported by the driver.
- A third-party driver cleaner or registry cleaner removed the Apple entries.
Often the driver is still present but disabled. Reinstalling it manually usually brings the connection back.
How to Fix It on Windows 10 and 11
Here are the most reliable steps to restore the driver. Try them in order.
Step 1: Reinstall the Driver in Device Manager
- Connect your iPhone or iPad to the PC with a known-good cable.
- Right-click the Start button and select Device Manager.
- Look under Universal Serial Bus devices for Apple Mobile Device USB Driver. If you see a yellow triangle, right-click it and select Uninstall device.
- If you don’t see it, look under Portable Devices for your iPhone name. Right-click and uninstall that too.
- With the phone still connected, click Action at the top of Device Manager and select Scan for hardware changes. Windows should detect the phone and reinstall the driver automatically.
If the driver doesn’t reappear, go to the next step.
Step 2: Update the Driver Manually
- In Device Manager, right-click the device with the yellow mark (or “Unknown device”) and select Update driver.
- Choose Browse my computer for drivers.
- Select Let me pick from a list of available drivers on my computer.
- Click Have Disk, then Browse.
- Navigate to
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers(orC:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Driverson 32-bit systems). - Select usbaapl.inf (or usbaapl64.inf) and click Open, then OK.
- Follow the prompts to install the driver.
If the folder doesn’t exist, you need to reinstall Apple’s software first.
Step 3: Reinstall iTunes or the Apple Devices App
On Windows 10 and 11, Apple distributes iTunes through the Microsoft Store. The Store version installs the driver differently. If the driver files are missing, uninstall and reinstall the app:
- Open Settings > Apps > Installed apps.
- Find iTunes (or Apple Devices if you’re on Windows 11 and using the new app).
- Uninstall it, then restart your PC.
- Reinstall from the Microsoft Store.
On older Windows versions, you may need the standalone iTunes installer from Apple’s website. The standalone installer includes the driver and also installs Bonjour and Apple Application Support. If you already have the Store version, you don’t need the standalone one.
Step 4: Check USB Ports and Cable
A faulty cable or port can cause the same symptoms. Try a different USB port, preferably a USB 2.0 port on the back of the PC. Avoid USB hubs and front-panel ports that may not supply enough power. If you have another Apple cable, test with that. If the phone charges but the PC doesn’t detect it, the cable may be data-only or damaged.
What to Do If the Driver Still Won’t Install
If the driver still fails, try these additional fixes:
- Restart both the PC and the iPhone (press and hold the side button and volume button until “slide to power off” appears, then turn it back on).
- Disable and re-enable the USB controller in Device Manager (under Universal Serial Bus controllers). Right-click each USB Root Hub and select Uninstall device, then restart. Windows will reinstall them.
- Run the Windows built-in Hardware and Devices troubleshooter: Settings > System > Troubleshoot > Other troubleshooters > Hardware and Devices.
- If you recently installed a Windows update, roll it back via Settings > Windows Update > Update history > Uninstall updates.
If none of that works, the issue may be a deeper USB driver conflict. Try booting into Safe Mode and see if the phone is detected. If it is, a third-party driver is interfering.
How to Prevent It From Happening Again
To reduce the chance of the driver disappearing again:
- Always use the cable that came with your iPhone or a certified third-party cable.
- Plug the phone directly into a PC port, not a hub.
- Keep Windows and Apple software updated.
- When you uninstall iTunes, restart the PC before reinstalling.
- Don’t use registry cleaners or driver update tools that remove Apple entries.
Frequently Asked Questions
Why does my iPhone say “Unlock to use accessories” when connected?
This is a security feature on iOS. You need to unlock your iPhone and tap Trust when prompted. If you don’t see the prompt, go to Settings > Face ID & Passcode (or Touch ID & Passcode) and enable USB Accessories while the phone is locked. This is not a driver issue, but it can make it seem like the PC isn’t seeing the phone.
Can I use a third-party driver instead of Apple’s?
No. You should only use the official Apple driver. Third-party drivers can cause instability and may not be signed properly for Windows. If the official driver isn’t working, reinstall Apple software rather than hunting for a replacement.
Does this fix work for iPads and iPods?
Yes. The same Apple Mobile Device USB Driver is used for all iOS and iPadOS devices. The steps are identical.
Why does the driver show as “Code 10” in Device Manager?
Code 10 means the device cannot start. This often happens after a Windows update or a power surge on the USB port. Uninstall the driver and let Windows reinstall it, or use the manual update method with the usbaapl.inf file. If the problem persists, try a different USB port.
Do I need to uninstall iTunes to fix the driver?
Not always. The manual driver update in Device Manager often works without touching iTunes. If the driver files are missing entirely, then you need to reinstall the Apple software that provides them. Uninstalling and reinstalling iTunes is the surest way to restore all Apple components.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Turn Off Shutter Sound on iPhone
- VPN Setup on iPhone SE: Step-by-Step Guide
- Fix Internet Not Working on Windows 11
- Fix Right Click Not Working in Firefox
- Compare Two Columns with Comma Separated Values in Excel
- How to Limit Ad Tracking on iPhone Apps