sodcalculator

10 Tech How-To

Connect Brother Printer to Computer: Solved

Guide 10-56504 · Updated · Step by step

To connect your Brother printer to your computer, you can use a USB cable, a wireless network, or an Ethernet connection; the fastest method is usually the automatic installer from Brother’s support site, which detects your printer and sets up the correct drivers. For most users, the wireless setup is the most convenient, but a USB connection is the most reliable for troubleshooting. This guide walks through each method step by step, along with common problems and fixes.

Before You Start: Check What You Have

Before connecting, gather a few things to avoid mid-setup frustration:

  • Printer model number – usually on the front or top of the device (e.g., HL-L2350DW, MFC-J995DW).
  • Connection type – check if your printer supports Wi-Fi, Ethernet, or only USB. Most modern Brother models have Wi-Fi; older ones may be USB-only.
  • Computer OS – Windows 10/11, macOS, or Linux. Brother provides drivers for all, but the steps differ slightly.
  • Network name (SSID) and password – needed for wireless setup.
  • USB cable – if you plan a wired connection, use a standard A-to-B cable (the square one).

If you’re replacing an old printer, uninstall its software first to avoid conflicts. On Windows, go to Settings > Apps and remove old printer drivers; on Mac, delete the printer from System Settings > Printers & Scanners.

Method 1: USB Connection (Simplest and Most Reliable)

USB is the most straightforward method and works even if your Wi-Fi is down. Here’s how:

  1. Plug the USB cable into your printer and then into your computer. Turn the printer on.
  2. Go to the Brother support website (support.brother.com) and search for your model.
  3. Download the “Full Driver & Software Package” for your operating system (not the “Driver Only” unless you know what you’re doing).
  4. Run the installer. It will ask for connection type – choose “USB” or “Wired Network” (depending on what you plugged in).
  5. Follow the on-screen prompts. The installer will detect the printer and finish within a few minutes.

After installation, test by printing a test page. If the printer doesn’t appear in the list, try a different USB port, and avoid using a USB hub – connect directly to the computer.

Method 2: Wireless (Wi-Fi) Connection

Wireless lets you place the printer anywhere and print from multiple devices. There are two ways to set it up:

Option A: Using the Printer’s Control Panel (WPS or Menu)

  1. On the printer’s touchscreen or buttons, go to Network or Settings.
  2. Select Wireless LAN or Wi-Fi, then choose Setup Wizard.
  3. The printer will scan for networks. Select yours, enter the Wi-Fi password (using the on-screen keyboard), and confirm.
  4. Once connected, the Wi-Fi light on the printer should be solid (not blinking).

If your router supports WPS (most do), you can press the WPS button on the router and then select WPS on the printer – it connects automatically without entering a password.

Option B: Using Brother’s Installer Software

  1. Download the full driver package from Brother’s site.
  2. Run the installer and choose Wireless Network Connection.
  3. When prompted, select your network and enter the password. The installer will send the settings to the printer.
  4. Finish the setup – the printer will appear in your list of devices.

If the installer can’t find the printer, temporarily connect it via USB just for setup (the installer will guide you), then disconnect the cable once the wireless is configured.

Method 3: Ethernet (Wired Network) Connection

Ethernet is ideal for offices or if you want a stable, high-speed connection without Wi-Fi interference. Steps:

  1. Connect an Ethernet cable from your router to the printer’s LAN port.
  2. Turn on the printer. It will automatically get an IP address from the router (usually within a minute).
  3. On your computer, download and run the Brother installer, selecting Wired Network.
  4. The installer will find the printer on the network and install drivers.

If the installer doesn’t find it, print a Network Configuration page (usually by holding the Go button for 3 seconds or via the menu) to see the IP address. Then, in the installer, choose “Specify IP Address” and enter it manually.

Adding the Printer Manually (If Auto-Detect Fails)

Sometimes the installer fails to detect the printer, especially on Mac or after a Windows update. Here’s how to add it manually:

On Windows 10/11

  1. Go to Settings > Bluetooth & devices > Printers & scanners.
  2. Click Add device. If your printer appears, select it. If not, click The printer that I want isn’t listed.
  3. Choose Add a printer using an IP address or hostname (for network printers) or Add a local printer (for USB).
  4. Enter the IP address (found on the printer’s network config page) or select the correct USB port.
  5. Install the driver from the list or browse to the downloaded driver file.

On macOS

  1. Open System Settings > Printers & Scanners.
  2. Click the + button.
  3. Your printer should appear in the list. If not, click IP and enter the printer’s IP address.
  4. Select the correct driver (Brother provides a specific driver; if not, use “Secure AirPrint” or “Generic PostScript”).

Common Problems and How to Fix Them

  • Printer not detected via USB: Try a different USB port, reboot both devices, and ensure the cable isn’t faulty. Also, check that the printer is powered on (not in sleep mode).
  • Wireless keeps dropping: Move the printer closer to the router, avoid thick walls, and ensure the printer’s firmware is updated. Restart both the printer and router.
  • Printer shows “Offline” on Windows: Go to Settings > Printers & Scanners, select your printer, and click “Open Print Queue.” Then click “Printer” menu and uncheck “Use Printer Offline.” Also, check that the printer is on the same network as your computer.
  • Mac can’t find the printer: Ensure both devices are on the same Wi-Fi network. Try re-adding the printer via IP, or reset the printing system (System Settings > Printers & Scanners > right-click and choose “Reset printing system”).
  • Driver installation fails: Run the installer as administrator (right-click > Run as administrator). Temporarily disable antivirus/firewall during installation, then re-enable.
  • Printer prints garbled text: This usually means a wrong driver is installed. Uninstall the printer completely (including drivers) and reinstall the correct full package for your model.

Frequently Asked Questions

Can I connect my Brother printer to my computer without a CD?

Yes. Brother provides all drivers and software for free on their support website. You don’t need the CD that came with the printer; in fact, the online version is usually more up-to-date.

Why does my Brother printer show as offline even though it’s on?

This is usually a network or driver issue. Check that the printer is on the same Wi-Fi network as your computer. On Windows, clear the “Use Printer Offline” checkbox. On Mac, delete and re-add the printer. Also, restart both devices.

How do I find my Brother printer’s IP address?

Print a Network Configuration page – on most Brother printers, hold the “Go” button for 3 seconds, or go to the printer’s menu under Network or Settings. The IP address will be listed as “IPv4 Address” (e.g., 192.168.1.20).

Can I connect my Brother printer to both USB and Wi-Fi at the same time?

Yes, most Brother printers support both connections simultaneously. The computer connected via USB will use the USB port, while other devices can use Wi-Fi. However, if you’re having issues, it’s often better to use one connection type.

What should I do if my Brother printer isn’t showing up in the list of available printers?

First, verify the printer is powered on and connected (USB or network). Then, on Windows, go to Settings > Devices > Printers & Scanners and click “Add device.” If it doesn’t appear, click “The printer that I want isn’t listed” and add it manually via IP or USB. On Mac, use the “+” button and try “IP” tab.

Do I need to install Brother software to use the printer?

Yes, you need the driver software for the printer to work with your computer. The full package includes the driver, scanning software, and utilities. Without it, the computer won’t recognize the printer.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →