sodcalculator

10 Tech How-To

Fix 0x80072efd Error in Windows 10

Guide 10-51857 · Updated · Step by step

The 0x80072efd error in Windows 10 usually means your PC cannot reach Microsoft’s servers, often due to a firewall, proxy, or date/time issue. You can fix it by checking your system clock, temporarily disabling third-party antivirus, or resetting Windows Update components. Below are the most effective solutions, tested against common causes.

What Causes Error 0x80072efd?

This error code is a Windows Update or Microsoft Store failure that translates to “ERROR_INTERNET_CANNOT_CONNECT.” It indicates that the device tried to connect to a Microsoft server but the connection was blocked or failed. Common triggers include:

  • System date and time are incorrect, breaking the secure HTTPS handshake.
  • Third-party firewall or antivirus software blocking Windows Update or Store traffic.
  • Proxy settings that are misconfigured or pointing to a dead proxy.
  • Corrupted Windows Update components or cache files.
  • Network issues, such as a VPN or a router that blocks certain Microsoft domains.
  • Outdated network drivers or a misconfigured DNS server.

Before You Start: Quick Pre-Checks

Some fixes are trivial but often overlooked. Try these first, as they take less than a minute:

  1. Restart your PC and router. A temporary network glitch can cause this error.
  2. Check the date and time: Right-click the clock → “Adjust date/time” → ensure “Set time automatically” and “Set time zone automatically” are on. If they are already on, toggle them off and on again, then manually set the correct time and time zone.
  3. Run the Windows Update troubleshooter: Settings → Update & Security → Troubleshoot → Additional troubleshooters → Windows Update → Run the troubleshooter.
  4. Make sure your internet connection works for other sites. If not, fix the network first.

Method 1: Temporarily Disable Third-Party Antivirus and Firewall

Security suites often block Windows Update by mistake. To test this:

  1. Right-click the antivirus icon in the system tray and choose “Disable” or “Pause protection” for about 10 minutes. If you have a separate firewall, disable it too.
  2. Try running Windows Update again. If it works, the security software is the culprit.
  3. Add Windows Update and Microsoft Store to the antivirus’s exception list, or reinstall the security software if the issue persists.

Do not leave your antivirus disabled longer than necessary. If you are using Windows Defender, it usually does not cause this error.

Method 2: Reset Windows Update Components

Corrupted update files can cause 0x80072efd. Resetting them manually is often the most reliable fix. Run Command Prompt as administrator (type “cmd” in Start, right-click, “Run as administrator”) and enter these commands one by one:

  1. net stop wuauserv – stops the Windows Update service.
  2. net stop cryptSvc – stops the cryptographic service.
  3. net stop bits – stops the Background Intelligent Transfer service.
  4. net stop msiserver – stops the Windows Installer service.
  5. ren C:\Windows\SoftwareDistribution SoftwareDistribution.old – renames the update cache folder.
  6. ren C:\Windows\System32\catroot2 Catroot2.old – renames the certificate store folder.
  7. net start wuauserv – restarts the Windows Update service.
  8. net start cryptSvc, net start bits, net start msiserver – restart the other services.

Then restart your PC and try updating again. This does not delete any personal files, only the update cache.

Method 3: Check Proxy and VPN Settings

Windows Update requires a direct connection to Microsoft servers. A misconfigured proxy or an active VPN can block it.

  1. Open Settings → Network & Internet → Proxy.
  2. Under “Manual proxy setup,” make sure “Use a proxy server” is off. If you need a proxy for your network, ensure the address and port are correct.
  3. If you use a VPN, disconnect it and try Windows Update again. Some VPNs route traffic through servers that Microsoft blocks.
  4. In the same Settings page, click “Network reset” at the bottom (this reinstalls network adapters and resets proxy settings). You will need to reconnect to Wi-Fi afterward.

Method 4: Flush DNS and Renew IP

DNS problems can prevent your PC from resolving Microsoft domains. Run Command Prompt as administrator and enter:

  1. ipconfig /flushdns
  2. ipconfig /release
  3. ipconfig /renew
  4. netsh winsock reset – resets the Winsock catalog.
  5. netsh int ip reset – resets the IP stack.

Restart your PC after these commands. If the error persists, try changing your DNS server to a public one like Google (8.8.8.8 and 8.8.4.4) or Cloudflare (1.1.1.1).

Method 5: Repair System Files with SFC and DISM

Corrupted system files can also cause this error. Run these tools in the same admin Command Prompt:

  1. sfc /scannow – scans and repairs protected system files. This can take 15-20 minutes.
  2. If SFC finds issues, run DISM /Online /Cleanup-Image /RestoreHealth – this repairs the system image. It may take longer.
  3. After DISM completes, run sfc /scannow again to fix any remaining files.

Frequently Asked Questions

Does 0x80072efd affect Windows 11 too?

Yes, the same error code appears in Windows 11, and the fixes are nearly identical. The steps for resetting Windows Update components and checking proxy settings work the same way.

Will resetting Windows Update delete my installed programs?

No. Resetting the update components only clears the temporary update cache and re-registers update files. Your installed applications and personal data remain untouched.

Why does this error appear when I try to use the Microsoft Store?

The Microsoft Store also relies on the same network services as Windows Update. If the Store cannot connect to Microsoft servers, you will see 0x80072efd. The fixes above apply to both.

How can I avoid this error in the future?

Keep your system date/time correct, avoid third-party firewalls that block Microsoft services, and regularly run Windows Update. If you use a VPN, exclude Microsoft domains from the VPN tunnel.

Is there a way to fix this without admin rights?

Most fixes require administrator privileges. If you are on a work or school PC, contact your IT administrator. The only user-level fix is checking date/time and running the Windows Update troubleshooter.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →