If your Ethernet connection suddenly stops working in Windows 11, the fix usually involves checking the physical cable, restarting the network adapter, or updating its driver. This article walks through the most effective troubleshooting steps, from quick checks to deeper system settings, so you can get back online fast.
Quick Checks Before You Dive In
Start with the basics—they solve a surprising number of cases.
- Inspect the cable and ports: Try a different Ethernet cable and plug it into another port on your router or wall jack. A loose or damaged cable is the #1 cause of “unplugged” errors.
- Test another device: Connect a laptop or game console to the same port. If that device also fails, the problem is likely your router or ISP, not your PC.
- Restart everything: Power-cycle your modem, router, and PC. Unplug the modem and router for 30 seconds, then plug them back in and wait for lights to stabilize.
If these don’t help, move on to software-level fixes.
Run the Built-in Network Troubleshooter
Windows 11 includes a diagnostic tool that automatically detects and fixes common network issues.
- Open Settings (Win + I) and go to System > Troubleshoot > Other troubleshooters.
- Find Network Adapter and click Run.
- Follow the prompts—it may ask you to select your Ethernet adapter and will attempt to reset it.
This often resolves IP address conflicts or disabled adapter states. If it reports “no problems found,” proceed to the next step.
Restart or Reset Your Network Adapter
Sometimes the adapter simply needs a fresh start.
- Press Win + X and select Device Manager.
- Expand Network adapters, right-click your Ethernet adapter (usually named “Realtek,” “Intel,” or “Killer”), and choose Disable device.
- Wait 10 seconds, then right-click again and select Enable device.
If that doesn’t work, try a full network reset:
- Go to Settings > Network & Internet > Advanced network settings.
- Click Network reset and then Reset now. This reinstalls all network adapters and sets everything back to default. You’ll need to reconnect to Wi-Fi afterward.
Note: A network reset requires administrator rights and will restart your PC.
Update or Reinstall the Ethernet Driver
Outdated or corrupted drivers are a frequent culprit. Windows usually updates drivers automatically, but a bad update can break things.
- Open Device Manager and expand Network adapters.
- Right-click your Ethernet adapter and select Update driver.
- Choose Search automatically for drivers. If Windows finds nothing, try Browse my computer > Let me pick from a list and select the latest version.
- If the issue started after a recent update, use Roll Back Driver (only available if a previous driver exists).
If updating doesn’t help, uninstall the driver entirely (check “Delete the driver software for this device” if prompted) and restart. Windows will reinstall a generic driver automatically.
Check IP Settings and DNS
Your PC might be getting an invalid IP address or using a problematic DNS server.
- Press Win + R, type
ncpa.cpl, and press Enter. - Right-click your Ethernet connection and select Properties.
- Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
- Ensure both “Obtain an IP address automatically” and “Obtain DNS server address automatically” are selected. If they already are, try switching to Google’s public DNS (8.8.8.8 and 8.8.4.4) to rule out ISP DNS issues.
You can also flush the DNS cache and renew your IP from the command prompt:
- Open Command Prompt as administrator (search “cmd,” right-click, Run as administrator).
- Type
ipconfig /release, thenipconfig /renew. - Then type
ipconfig /flushdnsandnetsh int ip reset.
Restart your PC after these commands.
Disable Power Saving for the Adapter
Windows sometimes turns off the Ethernet adapter to save power, which can cause it to stop responding.
- Open Device Manager, right-click your Ethernet adapter, and select Properties.
- Go to the Power Management tab.
- Uncheck “Allow the computer to turn off this device to save power.”
This is especially important on laptops, where power-saving features are more aggressive.
Advanced Fixes for Persistent Issues
If none of the above works, try these less common but effective solutions:
- Disable IPv6: In the same TCP/IPv4 properties window, uncheck “Internet Protocol Version 6 (TCP/IPv6)” and restart. Some routers have IPv6 issues.
- Check for Windows updates: Go to Settings > Windows Update and install any pending updates. Microsoft frequently ships network fixes.
- Run a malware scan: Use Windows Security or a trusted third-party tool. Malware can interfere with network drivers.
- Check your router’s MAC filter: If you’ve enabled MAC address filtering, your PC’s MAC might be blocked. Temporarily disable it to test.
Frequently Asked Questions
Why does my Ethernet say “Unidentified network” or “No internet”?
This usually means the PC has a link but can’t get a valid IP address or reach the internet. Try the IP release/renew commands, restart your router, and check if your router’s DHCP is enabled. If you’re using a static IP, verify the settings with your ISP.
Can a VPN cause Ethernet to stop working?
Yes, VPN clients can sometimes interfere with the network adapter. Try disconnecting the VPN and see if the connection returns. If it does, update the VPN software or reconfigure its settings to allow local network access.
What’s the difference between a network reset and a driver reinstall?
A network reset reinstalls all network adapters and resets all networking components to default, including Wi-Fi, Bluetooth, and VPN settings. A driver reinstall only affects the specific Ethernet adapter. Try the driver reinstall first, as it’s less disruptive.
My Ethernet works in Safe Mode but not normally. What does that mean?
This suggests a third-party program or service is interfering. Boot into Safe Mode with Networking, then check your startup programs and recently installed software. Disable any suspicious ones and restart normally.
How do I know if my Ethernet port is physically damaged?
Look for bent pins inside the port, a loose connection when the cable is plugged in, or a broken clip on the cable. If the link light on the port doesn’t light up even with a known-good cable, the port may be faulty. In that case, a USB-to-Ethernet adapter is a cheap workaround.
Is it worth trying a different Ethernet cable?
Absolutely. Ethernet cables are cheap and wear out, especially if they’re bent sharply or near pets. A Cat 6 cable is a good choice for gigabit speeds, but even a basic Cat 5e will work for most connections. Always test with a cable you know works.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Move Data to a New Samsung Galaxy Phone
- Pixel C vs Surface Pro: Key Differences
- iPhone X vs iPhone: Key Differences Explained
- Chromebook Won’t Charge: How to Fix
- How to Delete Photos on Google Drive
- Firefox Bookmark Management Tips & Tricks