If your iPhone can send and receive texts but won’t make or receive calls, the problem is almost always in the cellular voice settings, network configuration, or a temporary software glitch—not the phone’s hardware. This guide walks you through the most effective fixes, from quick toggles to carrier-level resets, so you can get your calls working again.
Why Does Texting Work When Calling Doesn’t?
Texts and calls use different parts of the cellular network. Texts (SMS/MMS) and iMessages often route through data channels, while voice calls rely on a separate voice channel (VoLTE or circuit-switched). If your iPhone has a data connection but the voice channel is misconfigured or blocked, you’ll see full bars and texts will send, but calls will fail. Common culprits include:
- Carrier settings update pending that adjusts voice network parameters.
- VoLTE (Voice over LTE) disabled—some carriers require it for calls.
- Call Forwarding or Do Not Disturb accidentally routing calls away.
- Network registration error after a software update or SIM change.
- Physical SIM or eSIM issue that affects voice but not data.
Quick Fixes to Try First
Start with these simple steps—they resolve a surprising number of cases.
- Toggle Airplane Mode: Open Control Center, tap the airplane icon, wait 10 seconds, then tap it off. This forces your iPhone to re-register with the cellular network.
- Restart your iPhone: Press and hold the side button and either volume button until the power slider appears, then slide to power off. Wait 30 seconds, then turn it back on.
- Check Do Not Disturb / Focus: Go to Settings > Focus. If any Focus is active, it may silence calls. Turn it off temporarily to test.
- Check Call Forwarding: Go to Settings > Phone > Call Forwarding. If it’s on, turn it off. Even if it looks off, toggle it on and off again to reset.
- Make a test call: After each step, try calling a friend or your voicemail. If voicemail works, your outgoing calls are fine—the issue may be with incoming calls.
Check Carrier Settings and VoLTE
Carrier settings updates are small files that configure your iPhone for your carrier’s network. They’re often delivered automatically, but you can check manually:
- Go to Settings > General > About.
- Wait a few seconds. If an update is available, a pop-up will appear saying “Carrier Settings Update.” Tap Update.
- If no pop-up appears, your carrier settings are current.
Next, verify VoLTE is enabled. VoLTE (Voice over LTE) is required by most carriers for calls on modern networks. To check:
- Go to Settings > Cellular > Cellular Data Options > Voice & Data.
- Select VoLTE if it’s not already chosen. (Some carriers may show “4G” or “LTE” instead—choose the option that includes VoLTE.)
- If you don’t see VoLTE, your carrier may not support it on your plan, or your SIM may be outdated.
Reset Network Settings
If the above fails, a network settings reset clears saved Wi-Fi networks, Bluetooth connections, and cellular settings. It won’t delete your photos or apps, but you’ll need to re-enter Wi-Fi passwords.
- Go to Settings > General > Transfer or Reset iPhone > Reset.
- Tap Reset Network Settings and enter your passcode.
- Confirm. Your iPhone will restart.
- After restart, re-connect to Wi-Fi if needed, then test a call.
This is a safe fix and often clears underlying network glitches that simple restarts don’t touch.
Check SIM Card and eSIM
A damaged or mis-seated SIM can cause voice failures while data still works. If you have a physical SIM:
- Eject the SIM tray using a paperclip or SIM tool.
- Inspect the SIM for scratches or dirt. Wipe it gently with a soft cloth.
- Reinsert the SIM firmly, ensuring it clicks into place.
- Restart your iPhone.
If you use an eSIM, try removing and re-adding it:
- Go to Settings > Cellular.
- Tap your eSIM plan, then Remove Cellular Plan (you’ll need your carrier’s QR code or activation info to re-add).
- Re-add the eSIM by scanning the QR code or entering details from your carrier.
If you’re unsure, contact your carrier—they can resend the eSIM activation.
Update iOS and Carrier Settings
Software bugs can cause calling issues, especially after a major iOS update. To update iOS:
- Go to Settings > General > Software Update.
- If an update is available, tap Download and Install.
- Ensure your iPhone is plugged in and connected to Wi-Fi.
After updating, check for carrier settings again (as above). Also, consider updating your carrier’s app if they have one—some carriers require it for VoLTE provisioning.
When to Contact Your Carrier
If none of the above works, the issue may be on your carrier’s side. Before calling, try:
- Remove your SIM and insert it into another phone (if possible) to test if calls work there.
- If calls work on another phone, the issue is your iPhone. If they don’t, it’s your line or SIM.
Contact your carrier and ask them to:
- Re-provision your line for voice service.
- Check if VoLTE is enabled on your account.
- Send a new SIM or resend eSIM activation.
Carrier-side issues like a blocked voice service or an outdated SIM profile are common and easily fixed by support.
Frequently Asked Questions
Why does my iPhone say “Call Failed” when I have full bars?
Full bars indicate a strong signal, but the voice channel may be unavailable. This often happens when VoLTE is disabled or the network is congested. Try toggling VoLTE on, or resetting network settings.
Can a Focus mode block calls but not texts?
Yes. Focus modes can allow texts from certain people while silencing calls. Check Settings > Focus and ensure calls aren’t being silenced for your selected contacts.
Will resetting network settings delete my photos?
No, it only clears network-related settings like Wi-Fi passwords, Bluetooth pairings, and cellular settings. Your photos, apps, and data remain untouched.
My iPhone calls work on speaker but not on the earpiece—what’s wrong?
That’s a hardware issue, likely a clogged or damaged earpiece speaker. Try cleaning the earpiece with a soft brush. If that doesn’t help, contact Apple Support or an authorized repair center.
Do I need to update my SIM card for VoLTE?
Older SIM cards may not support VoLTE. If you can’t enable VoLTE in settings, contact your carrier for a SIM replacement—many carriers provide them free.
Why won’t my iPhone receive calls but can make them?
Incoming calls failing often points to Call Forwarding, Do Not Disturb, or a carrier issue. Check Call Forwarding settings and Focus modes first. If those are clear, contact your carrier to verify your line isn’t blocked for incoming calls.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Text Cursor Turning White in Windows 11
- Force Quit Non-Responding Apps on Mac: 6 Ways
- Android to iPhone Hotspot: Connect & Fix Issues
- Chromebook Not Charging? Fix It Fast
- Fix Bluetooth Not Working on Discord Mobile
- Fix d3dx9 38.dll Missing or Not Designed to Run on Windows