VPN error 806 on Windows 10 means the VPN connection between your computer and the server was interrupted, usually because of a firewall, router, or protocol mismatch. You can fix it by adjusting the VPN protocol, checking your router’s PPTP passthrough, or reconfiguring Windows Firewall. This guide walks through the most common causes and step-by-step solutions.
What Is VPN Error 806?
Error 806 appears when the VPN client cannot establish or maintain a connection with the VPN server. The full message is often “The connection between your computer and the VPN server was interrupted.” This is different from error 800 (no connection possible) or error 628 (port closed). Error 806 specifically means the initial handshake succeeded but the connection was dropped mid-session, often due to a firewall or NAT device interfering with PPTP or L2TP traffic.
Why Does Error 806 Happen on Windows 10?
Windows 10 uses built-in VPN client software that supports PPTP, L2TP/IPsec, SSTP, and IKEv2. Error 806 is most commonly associated with PPTP connections because PPTP uses GRE (Generic Routing Encapsulation) protocol, which many routers and firewalls block or mishandle. Other triggers include:
- Router or modem firewall blocking PPTP port 1723 or GRE protocol 47
- Windows Firewall or third-party antivirus blocking VPN traffic
- Incorrect VPN protocol settings (e.g., trying to use PPTP when the server only supports L2TP)
- Outdated network drivers or Windows updates that changed VPN behavior
- ISP-level blocking of VPN protocols, especially PPTP
How to Fix VPN Error 806 on Windows 10
Follow these steps in order. Most users resolve the issue with step 1 or 2.
- Change the VPN protocol. Open Settings > Network & Internet > VPN, select your VPN connection, click “Advanced options,” and change the “VPN protocol” from PPTP to L2TP/IPsec or SSTP (if your server supports it). PPTP is outdated and often blocked. If you don’t know which protocol your server uses, contact your VPN provider.
- Check Windows Firewall. Type “Windows Defender Firewall” in the search bar, click “Allow an app or feature through Windows Defender Firewall,” then click “Change settings.” Scroll to “Routing and Remote Access” and check both Private and Public boxes. If it’s not listed, click “Allow another app” and add C:\Windows\System32\rasphone.exe.
- Disable third-party firewall/antivirus temporarily. Some security suites block VPN traffic. Temporarily disable the firewall and try connecting. If it works, add an exception for your VPN client.
- Enable PPTP passthrough on your router. Log into your router’s admin panel (usually 192.168.1.1 or 192.168.0.1), find “VPN” or “Advanced” settings, and enable “PPTP passthrough” or “IPsec passthrough.” Save and reboot the router.
- Update network drivers. Open Device Manager, expand “Network adapters,” right-click your adapter, and select “Update driver.” Choose “Search automatically for drivers.”
- Use a different VPN protocol. If your provider supports SSTP or IKEv2, switch to that. SSTP uses port 443, which is rarely blocked. IKEv2 is more stable on Windows 10.
- Reset the VPN connection. Delete the VPN connection in Settings > Network & Internet > VPN, then recreate it with the correct server address and protocol.
Common Misconceptions About Error 806
Many users think error 806 means their password is wrong, but that’s incorrect—password issues produce error 691. Others believe it’s a Windows bug, but it’s usually a network configuration issue. Another misconception is that disabling Windows Firewall entirely is a good fix; that leaves your system vulnerable. Instead, add specific exceptions. Also, some assume PPTP is the best protocol because it’s simple, but PPTP is deprecated and insecure, and many ISPs block it. Switching to SSTP or IKEv2 often solves the problem and improves security.
How to Prevent Error 806 in the Future
To avoid recurrence, keep your Windows and network drivers updated, use modern VPN protocols (SSTP or IKEv2), and ensure your router’s firmware is current. If you’re using a corporate VPN, ask your IT department which protocol they recommend. Also, avoid using third-party antivirus firewalls that aggressively block VPN traffic—if you must use one, configure it to allow your VPN client.
When to Contact Your VPN Provider or IT Support
If you’ve tried all the steps above and still get error 806, the problem may be on the server side. Contact your VPN provider or IT helpdesk and provide them with:
- The exact error message and code
- Your Windows version (e.g., Windows 10 Pro 22H2)
- Your VPN protocol and server address
- Any changes you made (e.g., router settings)
They can check server logs and see if the connection attempt reached the server. Sometimes the issue is a server-side firewall or a misconfigured VPN gateway.
Frequently Asked Questions
Does error 806 mean my VPN password is wrong?
No. A wrong password gives error 691. Error 806 indicates a connection interruption after the initial handshake, typically due to firewall or protocol issues.
Can I fix error 806 by changing my router?
Sometimes. If your router blocks PPTP or GRE, enabling passthrough or replacing the router with one that supports it can fix the issue. But first try changing the VPN protocol in Windows.
Is PPTP safe to use?
PPTP is outdated and has known security vulnerabilities. Microsoft recommends using SSTP or IKEv2 instead. If your VPN provider only offers PPTP, consider a different provider.
Will error 806 happen on Windows 11 too?
Yes, error 806 can occur on Windows 11 as well, since the VPN client is similar. The fixes are essentially the same.
How do I know which VPN protocol my server supports?
Check your VPN provider’s website or documentation, or contact their support. If you’re connecting to a workplace VPN, ask your IT administrator.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Alexa App Stuck on Setup
- Android Camera for 7 Office Tasks: Step-by-Step
- Pair Phone to Pioneer Stereo After Bluetooth Reset
- Fix Windows Not Saving Remote Desktop Credentials
- Fix Error 0x8007025d in Windows 10
- Essential Tips for macOS Users Switching to Windows