sodcalculator

10 Tech How-To

Driver Verifier Manager Shortcut: Windows 10 Desktop

Guide 10-44999 · Updated · Step by step

To create a Driver Verifier Manager shortcut on your Windows 10 desktop, right-click an empty area, select New > Shortcut, type verifier as the location, click Next, name it “Driver Verifier Manager,” and click Finish. This shortcut opens the Windows Driver Verifier utility, which monitors kernel-mode drivers for illegal function calls or actions that can corrupt the system. The tool is built into Windows 10 and is primarily used by developers and advanced users to stress-test drivers, but it can also help diagnose blue-screen errors caused by faulty drivers.

What Is Driver Verifier Manager?

Driver Verifier Manager (verifier.exe) is a Microsoft diagnostic tool included with Windows 10. It works by loading selected drivers into a special verification mode that checks for improper memory access, invalid I/O operations, and other rule violations. When a driver misbehaves, the system intentionally crashes with a blue screen (stop code) to capture the faulty driver’s name in the memory dump. This crash is not a bug in the tool—it is the tool working as designed, forcing the problematic driver to reveal itself.

The utility is often mistaken for a repair tool. It does not fix drivers; it only identifies them. After you know which driver is at fault, you can update, roll back, or replace that driver. Because of this, Driver Verifier is best used when you are already facing frequent blue screens and suspect a third-party driver is the cause.

Why Create a Desktop Shortcut?

Driver Verifier Manager is not pinned to the Start menu by default, and finding it via the Run dialog (Win+R, type verifier) is not obvious to most users. A desktop shortcut gives you one-click access, which is convenient if you are troubleshooting an unstable system and need to launch the tool repeatedly. It also saves time if you are a developer testing drivers regularly.

Another reason is that Driver Verifier Manager has no visible window until you open it. A shortcut makes the tool discoverable, reducing the chance you forget where it is when a crash occurs. You can also pin the shortcut to the taskbar or Start screen for even faster access.

Step-by-Step: Create the Shortcut

  1. Right-click on an empty area of your desktop.
  2. Hover over New and click Shortcut.
  3. In the location field, type verifier (or %windir%\system32\verifier.exe for the full path).
  4. Click Next.
  5. Type a name like “Driver Verifier Manager” (or simply “Verifier”).
  6. Click Finish.

The shortcut appears on your desktop. Double-clicking it opens the Driver Verifier Manager window. If Windows asks for permission, click Yes—the tool requires administrator rights to change driver verification settings.

How to Use the Shortcut Safely

When you open Driver Verifier Manager, you see several options. The most common is Create custom settings (for standard users) or Create standard settings (for developers). Standard settings check a default set of rules that catch most driver errors. Custom settings let you enable additional checks like IRP logging or low-resource simulation, which are more aggressive and can slow down your system.

You must then choose which drivers to verify. Selecting Automatically select all drivers installed on this computer is not recommended—it verifies every driver, which can cause the system to become extremely slow or fail to boot. Instead, choose Select driver names from a list and pick only the drivers you suspect, typically third-party ones like graphics, network, or storage drivers. Microsoft’s own drivers are generally safe to skip.

After applying the settings, you must restart your computer for verification to take effect. While verification is active, your system runs slower than normal. To turn it off, open the tool again, select Delete existing settings, and restart. The shortcut makes this process faster because you do not have to search for the tool each time.

Common Problems and Misconceptions

One common misconception is that Driver Verifier Manager is a virus or malware. Because it is a legitimate Windows tool, antivirus software does not flag it. However, if you see a process named verifier.exe running constantly, it is likely because you enabled verification and forgot to disable it. This can cause performance issues and unexpected blue screens.

Another problem is that users enable verification on all drivers, then the system fails to boot. If this happens, you can boot into Safe Mode (press F8 or Shift+Restart) and run verifier /reset from a command prompt to clear all settings. The shortcut does not help here because you need to run the command before Windows fully loads.

Also note that Driver Verifier Manager does not work in Safe Mode in the same way—it is disabled to avoid crashing the system during recovery. So you must use the command-line reset instead.

Alternatives to a Desktop Shortcut

If you do not want a desktop shortcut, there are other ways to launch Driver Verifier Manager:

  • Run dialog: Press Win+R, type verifier, and press Enter.
  • Command Prompt or PowerShell: Type verifier and hit Enter.
  • Task Manager: Go to File > Run new task, type verifier, and check “Create this task with administrative privileges.”
  • Start menu: Type “verifier” in the search box and click the result.

The desktop shortcut is the most direct if you prefer a permanent, visible icon. You can also change the shortcut’s icon by right-clicking it, selecting Properties, and choosing a different icon from the system’s icon library.

Frequently Asked Questions

Is Driver Verifier Manager safe to run?

Yes, the tool itself is safe. However, enabling verification on drivers can cause system crashes and performance degradation. Only use it when you are troubleshooting a driver issue, and always remove the settings after you finish diagnosing the problem.

Will the shortcut work if I am not an administrator?

No. Driver Verifier Manager requires administrative privileges to change verification settings. The shortcut will open, but you will see a UAC prompt. If your account is not an administrator, you cannot apply changes.

How do I remove the shortcut later?

Simply right-click the shortcut and select Delete. This does not uninstall the tool—it only removes the desktop icon. Driver Verifier Manager remains available in the system.

Can I use Driver Verifier Manager to fix a blue screen?

It does not fix the blue screen directly. It forces the faulty driver to cause a crash with a specific stop code that identifies the driver. Then you update or replace that driver. After that, you delete the verification settings and restart.

What does the “verifier /reset” command do?

It clears all current Driver Verifier settings and stops verification. This is useful if you cannot boot normally because of verification settings. Run it from Safe Mode or the Windows Recovery Environment.

Does the shortcut work on Windows 11?

Yes, the same steps apply to Windows 11. The tool is still present and works identically. The desktop shortcut creation process is also the same.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →