If your iPhone or iPad camera shows a black screen, freezes, or fails to focus after updating to iOS 11, you can usually fix it yourself in a few minutes. Start by force-closing the Camera app and restarting your device; if that doesn’t help, work through the steps below, from simple settings checks to a full restore.
Why the Camera App Fails on iOS 11
iOS 11 introduced a new camera interface, improved portrait mode, and better low-light handling, but it also brought a wave of camera-related glitches. Common causes include:
- A temporary app or system crash after the update.
- Conflicting settings, such as a misconfigured Location Services permission for the camera.
- Corrupted cached data from a previous iOS version.
- Storage space so low that the camera can’t write photos.
- Hardware issues, though these are less common than software ones.
Most reports of iOS 11 camera problems are software-related, which means you can often resolve them without visiting an Apple Store.
Quick Fixes to Try First
Start with the fastest solutions—they solve a surprising number of cases.
- Force-close the Camera app: Swipe up from the bottom of the screen (or double-click the Home button on older models) to open the app switcher, then swipe the Camera app card upward to close it. Wait a few seconds and reopen.
- Restart your iPhone or iPad: Press and hold the power button (and either volume button on Face ID models) until “slide to power off” appears. Slide to turn off, wait 30 seconds, then turn it back on.
- Check for a stuck app: If the camera works in other apps (like WhatsApp or Snapchat), the issue is isolated to the Camera app itself. A restart usually clears that.
Check Camera Permissions and Settings
iOS 11 made camera permissions stricter. If the Camera app is blocked from using certain features, it may show a black screen or refuse to take photos.
- Go to Settings > Privacy > Camera and make sure the Camera app (and any other app you want to use) is toggled on.
- Go to Settings > Privacy > Location Services, scroll to Camera, and select “While Using the App.” Some camera features (like geotagging) fail without location access.
- Check Settings > General > Restrictions (or Screen Time in later versions) to ensure the Camera isn’t disabled. If you see “Allow” in gray, the camera is blocked.
Free Up Storage Space
The Camera app needs room to write new photos and videos. If your device has less than 500 MB free, the camera may open but immediately crash or show a “Storage Full” message.
- Go to Settings > General > iPhone Storage (or iPad Storage) to see what’s taking up space.
- Delete large apps, old videos, or offload unused apps.
- Try taking a photo again once you have at least 1 GB free.
Reset All Settings (Without Erasing Data)
If permissions and storage aren’t the problem, resetting all settings can clear hidden glitches without deleting your photos, apps, or data.
- Go to Settings > General > Reset > Reset All Settings.
- Enter your passcode and confirm.
- Your device will restart. This resets Wi-Fi passwords, wallpaper, and other preferences, but your personal data stays intact.
This is a common fix for camera issues that persist after a restart.
Update iOS (or Restore from Backup)
Apple released several iOS 11 point updates (11.0.1 through 11.4.1) that fixed many camera bugs. If you’re still on an early version, updating may solve the problem.
- Go to Settings > General > Software Update and install any available update.
- If updating doesn’t help, back up your device and do a clean restore via Finder (or iTunes on older computers). Then set up as new and test the camera before restoring your backup.
When It’s a Hardware Problem
If none of the above works, the issue may be physical. Common hardware failures include a damaged camera lens, a loose connection, or a faulty camera module. Signs of hardware trouble:
- The camera shows a black screen even in safe mode (if you can boot to safe mode on a jailbroken device).
- The camera image is blurry or has a persistent dark spot.
- The camera works only in one mode (e.g., front but not rear).
In these cases, contact Apple Support or visit an authorized service provider. If your device is under warranty, repairs may be free.
Frequently Asked Questions
Why does my camera show a black screen after the iOS 11 update?
A black screen is usually a software crash. Force-closing the app and restarting your device fixes it most of the time. If not, try resetting all settings or updating to the latest iOS 11 version.
Will I lose my photos if I reset all settings?
No. “Reset All Settings” only resets system preferences like Wi-Fi passwords, wallpapers, and notification settings. Your photos, apps, and messages remain untouched.
Can a low battery cause the camera to not work?
Yes, if your battery is critically low (below 1%), the camera may fail to open because the system is conserving power. Charge your device to at least 20% and try again.
Why does the camera work in other apps but not the Camera app?
This usually points to a corrupt Camera app cache or a permission issue. Force-close the app, check the Camera permission in Settings, and restart your device.
How do I know if it’s a hardware issue?
If you’ve tried all software fixes and the camera still doesn’t work, it’s likely hardware. Contact Apple Support or a certified repair center. They can run diagnostics to confirm.
Is there a way to fix the camera without updating iOS?
Yes, try the restart, permission check, and reset all settings steps first. If those fail, updating is the most reliable next step, but you can also try restoring from a backup made before the issue started.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix msmpeg2vdec.dll Errors in Windows
- How to Update Sonos App and Speakers
- Unlock iPad Without Apple ID: Is It Possible?
- iOS 18 WhatsApp Notifications Not Working? Fix
- Fix Windows Cannot Locate Suitable Printer Driver
- Monster Hunter World PC Crash: Solved?