If your iPhone won’t charge, the fix is usually simple: clean the Lightning or USB-C port, try a different cable and power adapter, force restart the phone, or check for moisture alerts. This guide walks through each step in order, from the most likely cause to the least, so you can get back to a working battery without a trip to the Apple Store.
Why Your iPhone Stops Charging
Before you start troubleshooting, it helps to understand what can go wrong. The charging system involves three main parts: the power source (wall adapter or computer), the cable, and the iPhone’s port and internal charging circuitry. A failure in any one of these will stop the flow of power. Common culprits include:
- Debris in the port – pocket lint, dust, or crumbs can block the connector from making full contact.
- Damaged cable or adapter – frayed wires, bent pins, or a worn-out adapter can interrupt power delivery.
- Software glitches – a hung process or a corrupted setting can prevent the phone from accepting a charge.
- Moisture or liquid exposure – iPhones have a liquid detection feature that stops charging when it senses water in the port.
- Battery or hardware failure – if the battery is degraded or the charging IC is damaged, the phone may not charge at all.
Step 1: Inspect and Clean the Charging Port
This is the most common fix. Over time, lint and dust get compacted at the bottom of the Lightning or USB-C port, preventing the connector from seating fully. To clean it:
- Turn off your iPhone and unplug any cable.
- Use a soft, dry, lint-free cloth or a wooden toothpick to gently scrape out debris. Do not use metal tools, as they can short-circuit the pins.
- Hold the phone with the port facing down and lightly tap to dislodge loose particles.
- Try charging again. If it still doesn’t work, move to the next step.
If you see corrosion or a bent pin, stop cleaning and seek professional repair.
Step 2: Try a Different Cable and Adapter
Cables are the second most common failure point. A cable can look fine on the outside but have a broken wire inside. Test with a different Apple-certified cable and a different wall adapter. If you have access to another iPhone, try charging that phone with your cable and adapter to isolate the problem. Also, try plugging into a computer’s USB port – if that works, the issue is likely the wall adapter.
Step 3: Force Restart Your iPhone
A software glitch can sometimes stop charging. A force restart doesn’t erase data, but it can clear temporary issues. The steps vary by model:
- iPhone 8 or later: Press and quickly release the Volume Up button, then Volume Down, then press and hold the Side button until the Apple logo appears.
- iPhone 7/7 Plus: Press and hold both the Side and Volume Down buttons until the Apple logo appears.
- iPhone 6s or earlier: Press and hold both the Home and Side (or Top) buttons until the Apple logo appears.
After the restart, plug in the charger and wait a minute. If the battery icon appears, you’re good.
Step 4: Check for the Liquid Detection Alert
If you see a warning that says “Liquid Detected in Lightning Connector” or “Charging Not Available,” your iPhone has detected moisture. This is a safety feature to prevent electrical damage. Do not try to charge while wet. Instead:
- Unplug everything and gently tap the phone against your hand with the port facing down to remove excess liquid.
- Leave the phone in a dry, well-ventilated area for at least a few hours. Do not use a hair dryer or compressed air, as that can push moisture deeper.
- After it’s dry, try charging again. The alert should disappear.
Step 5: Use Wireless Charging (If Supported)
If your iPhone is an iPhone 8 or newer, it supports wireless charging via the Qi standard. If the wired port is damaged or wet, you can still charge wirelessly. Place the phone on a Qi-certified charging pad, making sure the back of the phone aligns with the center of the pad. Note that wireless charging is slower than wired and won’t work if the phone is too hot or if there’s a thick case.
Step 6: Check Battery Health and Settings
Go to Settings > Battery > Battery Health. If you see a message that says “Service” or the maximum capacity is below 80%, the battery may need replacement. Also, check if Optimized Battery Charging is on – this feature delays charging past 80% until you need it, which is normal. If the phone is very hot or very cold, charging may pause temporarily; move it to a room-temperature environment.
Step 7: Update iOS and Reset Settings
Apple periodically releases updates that fix charging-related bugs. Go to Settings > General > Software Update and install any pending update. If that doesn’t help, you can reset all settings (not your data) by going to Settings > General > Transfer or Reset iPhone > Reset > Reset All Settings. This will restore default preferences like Wi-Fi passwords and wallpaper, but won’t delete your photos or apps.
When to Seek Professional Repair
If you’ve tried all the above and your iPhone still won’t charge, the issue is likely hardware-related – a damaged charging port, a faulty battery, or a failed charging IC. At this point, contact Apple Support or a reputable repair shop. If your phone is under warranty or covered by AppleCare+, Apple may repair it for free. Do not attempt to open the phone yourself, as you risk further damage and voiding any warranty.
Frequently Asked Questions
Why does my iPhone only charge when the cable is held a certain way?
This usually indicates a worn cable or a damaged port. The connection is intermittent because the pins aren’t making full contact. Try a new cable first; if that doesn’t fix it, the port may need cleaning or repair.
Can I charge my iPhone with a non-Apple charger?
Yes, but it’s best to use a charger that is MFi-certified (Made for iPhone) to ensure safety and compatibility. Cheap, uncertified chargers may not deliver the correct voltage and can damage your battery or phone.
Why does my iPhone say “Cleaning required” when I plug it in?
This message appears when the Lightning connector detects moisture or debris. It’s a safety feature. Clean the port gently and let it dry completely before charging.
How long does it take to charge an iPhone?
With a standard 20W adapter, an iPhone typically reaches 50% in about 30 minutes, and a full charge takes about 1.5 to 2 hours, depending on the model and battery capacity. Wireless charging is slower, often taking 3-4 hours for a full charge.
Is it safe to charge my iPhone overnight?
Yes, modern iPhones have built-in protections to prevent overcharging. Once the battery reaches 100%, it stops drawing power. The Optimized Battery Charging feature even learns your routine to reduce battery aging.
What should I do if my iPhone is hot while charging?
If it’s warm, that’s normal. If it’s hot to the touch, unplug it immediately and let it cool down. Charging in a hot environment or under a pillow can cause overheating, which may damage the battery or trigger a temperature warning.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Move Games to SSD Without Reinstalling
- Move Windows 11 Taskbar to Top or Side: Easy Steps
- Windows 11 Calendar Wrong Day? Fix It Here
- How to Use curl Command in Linux
- Install ChromeOS: Convert Laptop to Chromebook
- Fix OneNote App Not Working on Android