sodcalculator

10 Tech How-To

Crypto Hash Rate: What It Measures & How to Read It

Tag 10-51744 · Updated · Standard formula, shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

Cryptocurrency hash rate measures the total computational power securing a proof-of-work network, expressed as hashes per second. To read it, you compare the network hash rate to the difficulty level: when hash rate rises, difficulty adjusts upward to keep block times constant, and vice versa. This single number tells you about network security, miner participation, and the energy being spent on mining.

Formula

The hash rate itself is not a formula but a measured quantity. However, the key relationship you will use is the difficulty adjustment formula used by Bitcoin and many other proof-of-work coins:

New Difficulty = Old Difficulty × (Actual Time for 2016 Blocks / 20160 minutes)

Where:

  • Old Difficulty – the difficulty level for the previous period (dimensionless)
  • Actual Time – the time it actually took to mine 2016 blocks (in minutes)
  • 20160 minutes – the target time for 2016 blocks (14 days)

For a single miner, the expected number of blocks you mine per day is:

Blocks per day = (Your Hash Rate / Network Hash Rate) × 144 (for Bitcoin, which targets 144 blocks per day)

Where your hash rate and network hash rate are in the same units (e.g., TH/s).

Worked Example

Using the calculator above with default values (40 ft × 25 ft × 3 in depth) gives you the volume of material you need, but that is a separate tool. For the hash rate example, let us use the difficulty formula:

Suppose the old difficulty is 50 trillion, and the actual time for the last 2016 blocks was 21,600 minutes (15 days).

  1. New Difficulty = 50,000,000,000,000 × (21,600 / 20,160)
  2. New Difficulty = 50,000,000,000,000 × 1.0714
  3. New Difficulty = 53,571,428,571,428.6

So the difficulty increases by about 7.14% because blocks were mined slower than the target. If blocks had been mined faster (say 18,000 minutes), the difficulty would drop.

What Hash Rate Actually Measures

Hash rate is the speed at which a mining device (ASIC, GPU, or CPU) can perform the cryptographic hash function required by the network. For Bitcoin, that is SHA-256; for Ethereum Classic, it is Ethash; for Monero, RandomX. The unit is hashes per second (H/s), with common prefixes:

  • 1 kH/s = 1,000 hashes/s
  • 1 MH/s = 1,000,000 hashes/s
  • 1 GH/s = 1,000,000,000 hashes/s
  • 1 TH/s = 1,000,000,000,000 hashes/s
  • 1 PH/s = 1,000,000,000,000,000 hashes/s
  • 1 EH/s = 1,000,000,000,000,000,000 hashes/s

The network hash rate is the sum of all miners’ hash rates. It is not a fixed number; it changes constantly as miners join, leave, or upgrade hardware. You can see real-time estimates on blockchain explorers or mining pool stats.

How to Read Network Hash Rate

When you look up a coin’s hash rate, you are seeing an estimate, not an exact count. Miners do not broadcast their hash rate; instead, the network infers it from the difficulty and the average block time. Here is how to interpret it:

  • Rising hash rate – more miners or more powerful hardware are joining, which usually signals growing network security and miner confidence. It also means your individual share of the network is shrinking, so your rewards per hash will drop unless difficulty adjusts.
  • Falling hash rate – miners are leaving, possibly due to unprofitable electricity costs or a price drop. This weakens security (making a 51% attack cheaper) but also lowers difficulty, which can make mining profitable again for those who remain.
  • Hash rate vs. price – often, but not always, hash rate follows price. When price rises, more miners join; when price crashes, less efficient miners shut down.

For a single miner, your own hash rate tells you how many guesses you make per second. To estimate your expected earnings, divide your hash rate by the network hash rate, then multiply by the number of blocks per day and the block reward (plus transaction fees).

Why Difficulty Matters

Difficulty is the number that tells miners how hard it is to find a valid block. It adjusts automatically to keep the average block time constant (10 minutes for Bitcoin, 15 seconds for Litecoin, etc.). The relationship is direct:

  • If hash rate goes up, blocks would be found faster, so difficulty increases to slow them down.
  • If hash rate drops, blocks would be found slower, so difficulty decreases to speed them up.

This is why you cannot simply say “higher hash rate = more coins for me.” A higher network hash rate means your share of the pie is smaller, even if the pie (block rewards) stays the same. The difficulty adjustment usually happens every 2016 blocks (about two weeks for Bitcoin), but some coins adjust every block (e.g., Ethereum Classic) or use a moving average.

Common Mistakes When Reading Hash Rate

People often misinterpret hash rate figures. Here are the most frequent errors:

  • Confusing units – mixing up MH/s and TH/s. A device that does 50 TH/s is 1,000 times faster than one doing 50 GH/s.
  • Assuming hash rate equals profit – your earnings depend on difficulty, block reward, electricity cost, and pool fees, not just hash rate.
  • Ignoring the network hash rate – a miner with 10 TH/s might earn more on a low-difficulty coin than a miner with 100 TH/s on a high-difficulty coin.
  • Thinking hash rate is fixed – network hash rate fluctuates every second. The number you see is an average over a recent window, not an exact present value.
  • Forgetting that difficulty adjusts – if you calculate future earnings using today’s difficulty, the estimate will be wrong after the next adjustment.

How to Choose a Mining Target Based on Hash Rate

If you are deciding which coin to mine, hash rate is one of several factors. Here is a practical approach:

  1. Find the network hash rate for each candidate coin (e.g., on a mining calculator or explorer).
  2. Look up the current difficulty and block reward.
  3. Estimate your daily earnings using a mining calculator (most pools provide one).
  4. Subtract your electricity cost (your power draw in kW × hours × rate).
  5. Compare the net profit across coins, but also consider coin price volatility and future difficulty trends.

Remember that a coin with a lower network hash rate is easier to mine per hash, but it may also be less secure and less liquid. Do not chase the highest hash rate; chase the best net profit after difficulty and price expectations.

Hash Rate and Network Security

Hash rate is often used as a proxy for security. The higher the hash rate, the more costly it is for an attacker to accumulate enough power to execute a 51% attack (where they control more than half the network’s hash rate and can double-spend). However, hash rate alone is not the whole story:

  • Rental hash rate – services like NiceHash allow anyone to rent hash power temporarily, so a high network hash rate does not guarantee that an attacker cannot rent a majority for a short time.
  • Concentration – if a few large pools control most of the hash rate, the network is more vulnerable to collusion or coercion, even if the total hash rate is high.
  • Proof-of-stake alternatives – some networks use staked coins instead of hash rate, so comparing security across consensus mechanisms is not straightforward.

In general, a higher hash rate makes attacks more expensive, but you should also check pool distribution (e.g., on a site that shows pool shares) to assess real decentralization.

Costs and Energy Consumption

Hash rate directly translates to electricity consumption. A miner running at 100 TH/s might draw 3,000 watts. Over a day, that is 72 kWh. At $0.10/kWh, that is $7.20 per day just for power. The cost per hash is a useful metric:

Cost per TH/s = (Power draw in watts × electricity rate) / Hash rate in TH/s

For example, an ASIC with 100 TH/s at 3,000 W and $0.10/kWh:

  • Daily power cost = 3,000 W × 24 h × $0.10 / 1,000 = $7.20
  • Cost per TH/s per day = $7.20 / 100 = $0.072

Compare this across devices to find the most efficient miner. Efficiency is often quoted in J/TH (joules per terahash). Lower is better. A device with 30 J/TH uses 30 joules per terahash, while one with 40 J/TH uses more electricity for the same work.

Alternatives to Hash Rate for Network Health

Hash rate is not the only metric to watch. For a fuller picture, consider:

  • Active addresses – number of unique addresses transacting, indicating real usage.
  • Transaction count and fees – shows network demand and congestion.
  • Miner revenue – total block rewards plus fees, which shows miner profitability.
  • Difficulty – already discussed, but it is a lagging indicator of hash rate.
  • Node count – number of full nodes running the software, which affects decentralization.

Hash rate is a strong indicator of mining activity, but it does not tell you about user adoption or development activity. Use it alongside other on-chain metrics for a balanced view.

Frequently Asked Questions

What is a good hash rate for a cryptocurrency?

There is no universal “good” hash rate. It depends on the coin’s algorithm and the total network. For Bitcoin, the network hash rate is in the hundreds of EH/s, so a single miner with 100 TH/s is a tiny fraction. For a smaller altcoin, even 1 MH/s might be significant. Always compare your hash rate to the network’s, not to an absolute number.

Does higher hash rate mean more profit?

Not necessarily. Profit depends on your hash rate relative to the network, the block reward, difficulty, electricity cost, and coin price. A higher hash rate gives you a larger share of blocks, but if difficulty rises proportionally, your share stays the same. Profitability calculators account for this, so use them rather than just looking at hash rate.

How is network hash rate calculated?

It is estimated from the current difficulty and the average block time. The formula is roughly: Network Hash Rate = (Difficulty × 2^32) / Average Block Time. For Bitcoin, this gives an approximate value. It is not a direct measurement, but a statistical estimate.

Why does hash rate drop after a price crash?

When the coin price falls, mining becomes less profitable. Miners with high electricity costs or older, less efficient hardware may earn less than their power costs, so they shut down. This reduces the total hash rate until difficulty adjusts downward, making it profitable again for the remaining miners.

Can hash rate be faked?

In theory, a miner could claim a higher hash rate than they actually have, but this is self-defeating because they would not find blocks to match. Mining pools detect this through share submission rates. However, an attacker could rent hash power temporarily to inflate the network hash rate, but that would not be sustainable. The network hash rate is an estimate, so it can be slightly off, but it is not easily faked in a meaningful way.

What is the difference between hash rate and hashrate?

They are the same thing. “Hash rate” is the standard spelling, while “hashrate” is a common variant. Both refer to the speed of hashing operations per second. You will see both used interchangeably in the crypto community.

Related

Formula used
in l | Lawn length | ft | 40 | 0 | 100000
in w | Lawn width | ft | 25 | 0 | 100000
in d | Depth | in | 3 | 0 | 120
out yd | Volume | yd³ | l * w * d / 324 | 2
out ft3 | Volume | ft³ | l * w * d / 12 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More in this bed

The whole Tech How-To bed →