The Automator app is a built-in macOS tool that lets you create custom workflows to automate repetitive tasks on your Mac. You use it by dragging and dropping actions into a workflow, then running that workflow manually, on a schedule, or as a standalone app. It has been part of macOS since 2005 and remains a practical way to speed up file renaming, image resizing, PDF processing, and similar batch operations without writing code.
Formula
The calculator works out the volume of soil, sand, or other material needed to cover a rectangular lawn to a given depth. The formula is:
Volume (yd³) = (Length × Width × Depth) / 324
Where:
- Length – the lawn length in feet (ft)
- Width – the lawn width in feet (ft)
- Depth – the desired depth of material in inches (in)
- 324 – conversion factor: 1 cubic yard = 27 cubic feet, and 1 foot = 12 inches, so 27 × 12 = 324
The second output gives the volume in cubic feet directly: Volume (ft³) = Length × Width × Depth / 12, because depth in inches divided by 12 converts it to feet.
Worked Example
Using the default values from the calculator – length 40 ft, width 25 ft, depth 3 in – the calculation proceeds as follows:
- Multiply length by width: 40 × 25 = 1000 ft² (area)
- Convert depth to feet: 3 in ÷ 12 = 0.25 ft
- Multiply area by depth: 1000 × 0.25 = 250 ft³
- Convert to cubic yards: 250 ÷ 27 = 9.259 yd³
The calculator rounds to two decimals, giving 9.26 yd³. The cubic feet output shows 250 ft³.
When to Use This Calculator
Use this calculator when you need to order topsoil, compost, mulch, sand, or gravel for a rectangular lawn or garden bed. It is also useful for estimating the amount of fill needed to raise a low spot or create a new planting area.
The result tells you the total volume of material required. When purchasing, remember that suppliers sell bulk material by the cubic yard, and bagged products are usually sold by cubic foot. You can convert between the two using the calculator’s outputs.
Common Mistakes and How to Avoid Them
- Mixing units – always enter length and width in feet, and depth in inches. If you measure in meters, convert to feet first (1 m ≈ 3.281 ft) or use a different tool.
- Forgetting compaction – soil and sand settle after spreading. Order about 10–15% extra if you need the final surface to be exactly level after settling.
- Rounding too early – keep full precision during calculations and round only the final result, as the calculator does.
- Ignoring irregular shapes – this formula assumes a perfect rectangle. For curved or L-shaped areas, split them into rectangles and add the volumes.
Limitations of the Formula
The formula gives a geometric volume, not the actual amount you will need to buy. Real-world factors include:
- Settling and compaction – loose material compresses, so the final depth may be less than planned.
- Waste and spillage – some material is lost during spreading.
- Supplier rounding – bulk orders are often rounded to the nearest half or whole cubic yard.
Always confirm with your supplier how they measure and whether they recommend a surplus percentage.
Frequently Asked Questions
How many bags of soil do I need for 1 cubic yard?
It depends on the bag size. A typical bag holds 1 cubic foot, so you would need 27 bags. For 2-cubic-foot bags, you need 14 bags (since 27 ÷ 2 = 13.5, round up). Check the bag label – sizes vary.
Should I order extra material?
Yes, for most landscaping projects, adding 10–15% is wise. The extra covers settling, compaction, and uneven spreading. For a project where exact depth is critical, consider 15–20%.
Can I use this calculator for mulch?
Yes, the same volume formula works for any loose material – mulch, compost, gravel, or sand. Just ensure you enter the depth you want for that specific material.
What if my lawn is not a perfect rectangle?
Break the area into rectangles, calculate each one separately, and add the volumes. For a triangle, use (base × height / 2) as the area, then multiply by depth and convert to cubic yards.
How deep should topsoil be for a new lawn?
For most grass seed, 4–6 inches of topsoil is recommended. For sod, 3–4 inches is often sufficient. Check with your local nursery or extension service for regional advice.