Anker iPhone Accessories: Which Fits Your Charging Needs?

Choosing the right Anker iPhone accessory comes down to how and where you charge: at home, in the car, or on the go. This guide breaks down the main Anker product lines—PowerPort, PowerCore, Nano, and MagGo—so you can match a charger or power bank to your specific iPhone model and daily routine.

Anker’s Charging Lines Explained

Anker organizes its iPhone accessories into a few distinct families, each with a different focus:

PowerPort – Wall chargers with one or multiple USB ports. These are the basic, reliable bricks you plug into an outlet.
PowerCore – Portable power banks in various capacities, from slim 5,000 mAh sticks to high-capacity 20,000+ mAh bricks.
Nano – Ultra-compact wall chargers, often using GaN (gallium nitride) technology to shrink the size while maintaining power output. The Nano series includes single-port and multi-port models.
MagGo – Wireless chargers and power banks that use Apple’s MagSafe magnetic alignment system. These snap onto the back of iPhone 12 and newer models.
PowerLine – Cables, from standard USB-C to USB-C to braided heavy-duty versions.

Knowing these lines helps you navigate Anker’s product names, which often combine the family with a number (like PowerCore 10K or Nano II).

How Anker Charging Speeds Work with iPhone

iPhones support two main fast-charging standards: USB Power Delivery (PD) over a wired connection, and the Qi wireless standard (with MagSafe for faster 15W charging on compatible models). Anker’s modern chargers support PD, which is what your iPhone uses to charge quickly.

For wired charging, an iPhone 8 or later can charge from 0 to 50% in about 30 minutes when using a charger that delivers at least 18W (though newer models can take up to 20W or 27W). Anker’s Nano chargers typically offer 20W or 30W, which is enough for any iPhone. A 20W charger is the sweet spot for most users—it’s fast, compact, and won’t overheat.

For wireless charging, MagSafe delivers up to 15W on iPhone 12 through 15 models. Non-MagSafe Qi chargers are limited to 7.5W on iPhones. If you want the fastest wireless speeds, you need a MagSafe-certified accessory like Anker’s MagGo line.

Choosing a Wall Charger

If you need a charger for your nightstand or desk, consider the following:

Single-port Nano (20W) – Perfect for one iPhone. It’s tiny, plugs directly into the wall, and gives you fast charging. The 20W Nano is about the size of Apple’s original 5W charger but much faster.
Multi-port chargers (e.g., 65W or 100W) – Great for charging an iPhone, iPad, and even a MacBook at the same time. Anker’s GaN chargers pack multiple USB-C ports into a compact brick. A 65W charger can handle a MacBook Air and an iPhone simultaneously.
Charging stations – Anker also makes desktop chargers with foldable prongs and multiple ports. These are ideal for a family or a shared workspace.

When choosing a wall charger, also check the cable: your iPhone comes with a USB-C to Lightning cable (or USB-C to USB-C for iPhone 15 and later). Make sure the charger has a USB-C port that supports PD.

Selecting a Power Bank

Power banks are rated by milliampere-hours (mAh), which tells you how much charge they hold. A good rule of thumb:

5,000 mAh – About one full charge for a standard iPhone. These are slim and pocketable.
10,000 mAh – Around two full charges. This is the most popular size for everyday carry.
20,000 mAh – Four or more charges. Great for travel or heavy use, but heavier and bulkier.

Anker’s PowerCore line offers these sizes, and many include fast charging via USB-C PD. Some models have a built-in USB-C cable, which is convenient. For MagSafe-compatible iPhones, Anker’s MagGo power banks attach magnetically and charge wirelessly, though they also have a USB-C port for wired charging.

When choosing a power bank, consider both capacity and output. A 10,000 mAh bank with 20W PD output can charge an iPhone from 0 to 50% in about 30 minutes, just like a wall charger.

MagSafe and Wireless Options

If you prefer wireless charging, Anker’s MagGo line is designed for iPhone 12 and newer. Key products include:

MagGo Wireless Charger – A puck-style charger that snaps to the back of your iPhone, delivering 15W fast charging.
MagGo Power Bank – A portable battery that attaches magnetically. It’s perfect for topping up during the day without cables.
MagGo Charging Stand – A stand that holds your iPhone upright while charging, often with an adjustable viewing angle for FaceTime or watching videos.

One thing to note: MagSafe charging generates heat, which can reduce charging speed if the phone gets too warm. Anker’s MagGo products often include cooling features, but it’s still wise to remove thick cases that might interfere with the magnetic connection.

Cables: The Often Overlooked Link

The cable is just as important as the charger. Anker’s PowerLine cables come in various lengths and durability ratings. For iPhones, you need either a USB-C to Lightning cable (for iPhone 14 and earlier) or a USB-C to USB-C cable (for iPhone 15 and later).

Anker’s PowerLine III cables support fast charging and are reinforced at the connectors to resist bending. Some are braided for extra durability. If you’re using a 20W charger, any decent USB-C cable will work, but a high-quality one ensures consistent power delivery and lasts longer.

Common Problems and Misconceptions

One common misconception is that using a higher-wattage charger will damage your iPhone. In reality, iPhones regulate how much power they take, so a 65W charger won’t harm your phone—it will just charge at the maximum speed your iPhone supports (usually 20W or 27W). Anker’s chargers are safe and include over-current and over-voltage protection.

Another issue is heat. Fast charging and wireless charging generate heat, which can slow charging if the phone gets hot. To avoid this, remove thick cases and avoid charging in direct sunlight. Anker’s GaN chargers run cooler than older silicon-based ones, but they still produce some heat.

Some users also wonder if they can use an Anker charger with a non-Apple cable. Yes, as long as the cable is MFi-certified (Made for iPhone), it will work. Anker’s cables are MFi-certified, so you’re safe.

Frequently Asked Questions

Can I use an Anker 65W charger with my iPhone?

Yes, absolutely. Your iPhone will only draw the power it needs (up to about 27W for the Pro Max models), so a 65W charger is safe and will charge your iPhone at its maximum speed. The extra capacity is useful for charging other devices like a MacBook or iPad.

What’s the difference between Anker Nano and PowerPort?

The Nano series is Anker’s ultra-compact line, using GaN technology to reduce size. PowerPort is the older, larger line. For the same wattage, a Nano charger is significantly smaller. If you want a tiny charger that fits in a pocket, go with Nano; if you need multiple ports and don’t mind a bigger brick, PowerPort is fine.

How long does an Anker power bank last?

Anker power banks typically last for 300-500 charge cycles before their capacity noticeably degrades. That means a few years of daily use. The battery will slowly lose capacity, but it won’t suddenly stop working. Anker offers an 18-month warranty on most power banks.

Is MagSafe charging worth it?

If you value convenience, yes. MagSafe allows you to snap the charger on without fiddling with cables, and it charges at 15W, which is faster than standard Qi wireless charging (7.5W). However, it’s still slower than wired charging (20W). If you’re often in a hurry, wired charging is better; if you want a simple bedside setup, MagSafe is great.

Can I charge my iPhone and AirPods with the same Anker charger?

Yes, if you have a multi-port charger. Many Anker chargers have two or more ports, so you can plug in your iPhone and AirPods case simultaneously. Just make sure the total output is enough—a 40W charger with two ports can easily handle an iPhone (20W) and AirPods (5W) at the same time.

Final Recommendations

For most people, a 20W Anker Nano wall charger and a 10,000 mAh PowerCore power bank cover all daily needs. If you have an iPhone 12 or newer and want wireless convenience, add a MagGo charger. For travelers, a 65W GaN charger with two ports is a versatile choice. Always pair with a quality USB-C cable, and you’ll have a reliable charging setup for years.

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →