sodcalculator

10 Tech How-To

Best Gmail Inbox Type for Managing Email Without Inbox Zero

Tag 10-57111 · Updated · Standard formula, shown below

Volume 9.26 yd³
Volume
250.0 ft³
Result
Lawn length
40 ft
You entered
Lawn width
25 ft
You entered
You enter
Lawn length, Lawn width, Depth
You get
Volume, Volume
Rounding
2 dp · 1 dp

The best Gmail inbox type for managing email without inbox zero is Priority Inbox (or the newer Default view with categories), because it sorts messages into sections so you can process only what matters and leave the rest unread without guilt. Unlike Inbox Zero’s demand to clear everything, these views let you triage by importance, archive or delete the critical stuff, and let low-priority mail sit until you have time.

Formula

The volume of topsoil, compost, or fill needed for a rectangular area is:

Volume (yd³) = Length (ft) × Width (ft) × Depth (in) ÷ 324

Where:

  • Length = the lawn or bed length in feet (ft)
  • Width = the lawn or bed width in feet (ft)
  • Depth = the desired soil depth in inches (in)
  • 324 = conversion factor: 1 cubic yard = 27 cubic feet, and 12 inches = 1 foot, so 27 × 12 = 324

The second output, cubic feet, uses the simpler formula: Length × Width × Depth ÷ 12.

Worked Example

Using the default values from the calculator (Length = 40 ft, Width = 25 ft, Depth = 3 in):

  1. Convert depth to feet: 3 in ÷ 12 = 0.25 ft
  2. Calculate volume in cubic feet: 40 × 25 × 0.25 = 250 ft³
  3. Convert to cubic yards: 250 ÷ 27 = 9.259 yd³

The calculator rounds to 9.26 yd³, matching the result shown above.

When to Use This Calculator

Use this calculator when you are planning to add a layer of soil, compost, mulch, or sand to a garden bed, lawn topdressing, or a raised planter. It works for any rectangular area with a uniform depth. For circular beds, use the circle area formula (πr²) and then multiply by depth; for irregular shapes, break the area into rectangles and sum the volumes.

How to Read the Result

The main result is in cubic yards, which is the standard unit for ordering bulk soil and mulch. Most landscape suppliers sell soil by the cubic yard, so you can call them with this number. The secondary result in cubic feet is useful for smaller projects or when buying bagged soil (bags are typically 1–2 cubic feet).

Remember that soil settles after watering, so it is common to order 5–10% more than the calculated volume, especially for loose fill like compost.

Common Mistakes

  • Mixing units: Always convert inches to feet before multiplying. A depth of 3 inches is 0.25 feet, not 3 feet.
  • Forgetting the 27: There are 27 cubic feet in a cubic yard, not 3 or 9. This is the most frequent error.
  • Ignoring compaction: Fresh soil compresses when walked on or watered. Add a buffer if you need the final surface to be exactly level.
  • Rounding too early: Keep full precision during the calculation, then round the final answer. Rounding intermediate steps can shift the result by several cubic feet.

Limits of the Formula

This formula assumes a perfectly rectangular area with a flat bottom and uniform depth. Real lawns and beds often have slopes, curves, or existing vegetation that changes the actual volume needed. The formula also does not account for the moisture content or settling rate of the material, which can vary widely between topsoil, compost, and sand. For large projects (more than 10 cubic yards), it is wise to confirm with the supplier or a landscape professional.

Frequently Asked Questions

How many bags of soil do I need for 2 cubic yards?

If you buy 2-cubic-foot bags, you need 2 × 27 ÷ 2 = 27 bags. For 1-cubic-foot bags, you need 54 bags. Always check the bag size, as some are sold in quarts or liters.

What depth of topsoil do I need for a new lawn?

For a new lawn from seed, 4–6 inches of topsoil is typical. For sod, 3–4 inches is often enough. This calculator uses the depth you enter, so adjust the default 3 inches to match your project.

Can I use this for mulch or gravel?

Yes, the same volume calculation applies to any bulk material. The weight will differ, but the volume in cubic yards is what you order.

How do I calculate for a circular garden bed?

Measure the radius (half the diameter) in feet, square it, multiply by π (3.1416), then multiply by the depth in feet. That gives cubic feet; divide by 27 for cubic yards.

Should I order extra soil?

Most landscapers recommend ordering 5–10% more to account for settling, spillage, and uneven ground. For a 9.26 yd³ project, that means about 9.7–10.2 yd³.

Related

Formula used
in l | Lawn length | ft | 40 | 0 | 100000
in w | Lawn width | ft | 25 | 0 | 100000
in d | Depth | in | 3 | 0 | 120
out yd | Volume | yd³ | l * w * d / 324 | 2
out ft3 | Volume | ft³ | l * w * d / 12 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More in this bed

The whole Tech How-To bed →