sodcalculator

10 Tech How-To

Best Photo Editor App for Windows & Mac

Tag 10-46575 · Updated · Standard formula, shown below

Volume 9.26 yd³
Volume
250.0 ft³
Result
Lawn length
40 ft
You entered
Lawn width
25 ft
You entered
You enter
Lawn length, Lawn width, Depth
You get
Volume, Volume
Rounding
2 dp · 1 dp

The best photo editor app for both Windows and Mac is Adobe Lightroom (or Lightroom Classic) for overall workflow and raw editing, while Affinity Photo is the best one-time-purchase alternative for pixel-level retouching. For a completely free option that runs identically on both platforms, GIMP offers the most powerful feature set.

Formula

The calculator uses the standard rectangular volume formula: Volume = Length × Width × Depth. To get cubic yards, you divide the result in cubic feet by 27 (since 1 yard = 3 feet, so 1 yd³ = 3 × 3 × 3 = 27 ft³). The depth is entered in inches, so it must be converted to feet first by dividing by 12.

In symbols: Vyd³ = (L × W × D/12) / 27, which simplifies to L × W × D / 324.

Variables:

  • L = lawn length (feet)
  • W = lawn width (feet)
  • D = depth of sod or soil (inches)
  • V = volume (cubic yards or cubic feet)

Worked Example

Using the default values from the calculator above (L=40 ft, W=25 ft, D=3 in):

  1. Convert depth to feet: 3 in ÷ 12 = 0.25 ft
  2. Calculate volume in cubic feet: 40 × 25 × 0.25 = 250 ft³
  3. Convert to cubic yards: 250 ÷ 27 = 9.26 yd³

The calculator shows 9.26 yd³ and 250 ft³, matching the manual calculation.

When to Use This Calculator

Use this calculator when you need to order topsoil, compost, mulch, or sod for a rectangular lawn or garden bed. It is also handy for estimating the amount of fill dirt needed for a raised bed or leveling a yard. The result tells you how many cubic yards to purchase from a landscape supplier – most sell soil and mulch by the cubic yard, not by the bag.

How to Read the Result

The first output (cubic yards) is the number you will quote when ordering bulk material. The second output (cubic feet) helps if you are buying bagged product – a typical bag holds 1 to 3 cubic feet. For example, 250 ft³ would require 250 bags of 1 ft³ each, which is usually far more expensive than ordering bulk.

Common Mistakes

  • Mixing units: Entering depth in inches but length in feet without converting – the calculator handles this, but if you do it manually, always convert depth to feet first.
  • Forgetting the 27 factor: Cubic yards are not 3 times cubic feet – they are 27 times. A common error is dividing by 3 instead of 27.
  • Rounding too early: Rounding the depth to 0.3 ft instead of 0.25 ft changes the result. Keep full precision until the final step.

Limits of the Formula

This formula assumes a perfectly rectangular area with a uniform depth. Real lawns have curves, slopes, and irregular shapes. For irregular areas, break them into rectangles, calculate each, and sum the results. Also, soil compacts when spread, so you may need 10-15% extra if you are filling a large depression. The calculator gives the theoretical volume – always confirm with your supplier about compaction and settling factors.

Frequently Asked Questions

How many cubic feet are in a cubic yard?

Exactly 27 cubic feet (3 ft × 3 ft × 3 ft). That is why the formula divides by 27 after converting everything to feet.

Should I order extra sod or soil?

For sod, order about 5-10% extra to account for cutting and waste around curves. For soil or mulch, add 10-15% if you need to fill a low spot because the material will settle after watering or rain.

Can I use this calculator for circular areas?

No, this one is for rectangles only. For a circle, use the formula π × r² × depth, and then divide by 27 to get cubic yards.

What if my lawn is not a perfect rectangle?

Break the area into smaller rectangles (or triangles), calculate each with the same depth, and add the volumes together. This gives a close approximation.

How deep should I lay topsoil for a new lawn?

For most grass seed, 4-6 inches of topsoil is recommended. For laying sod, 3-4 inches is usually enough. The calculator defaults to 3 inches, but you can adjust it to your project.

Related

Formula used
in l | Lawn length | ft | 40 | 0 | 100000
in w | Lawn width | ft | 25 | 0 | 100000
in d | Depth | in | 3 | 0 | 120
out yd | Volume | yd³ | l * w * d / 324 | 2
out ft3 | Volume | ft³ | l * w * d / 12 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More in this bed

The whole Tech How-To bed →