sodcalculator

10 Tech How-To

GPU Fans Not Spinning? Fixes That Work

Guide 10-53024 · Updated · Step by step

If your GPU fans aren’t spinning, the most common cause is that the graphics card is simply cool enough that the fan-stop mode keeps them off — this is normal and not a fault. If the fans stay still while the GPU is under load or running hot, the fix is usually cleaning the fans, updating drivers, or adjusting the fan curve in software.

Why GPU Fans Have a Fan-Stop Mode

Modern graphics cards from NVIDIA, AMD, and Intel ship with a fan-stop (also called 0 RPM or semi-passive) feature. When the GPU temperature sits below a set threshold — typically around 50–60°C (122–140°F) — the fans remain off to eliminate noise. This is a deliberate design choice, not a defect. The heatsink alone is enough to cool the card during light tasks like web browsing, watching video, or using office software.

You can confirm this is the case by checking your GPU temperature with a tool like MSI Afterburner, HWiNFO, or the manufacturer’s own software. If the temperature is below the fan-stop threshold and the fans are off, everything is working as intended. The fans should spin up automatically once the GPU heats up under gaming, rendering, or other heavy loads.

How GPU Fan Control Works

GPU fans are controlled by the graphics card’s BIOS/firmware, which reads temperature sensors on the GPU die and, in some cards, on the memory and VRM (voltage regulator module) areas. The firmware uses a fan curve — a mapping of temperature to fan speed percentage. Below the zero-RPM temperature, the fans are off. Above it, the fans start spinning at a low speed and ramp up as temperature rises.

Most cards also allow software override. Tools like MSI Afterburner, ASUS GPU Tweak, EVGA Precision X1, and AMD Adrenalin software let you set a custom fan curve or force the fans to run at a fixed speed. This is useful if you want the fans on at all times, or if the default curve is too aggressive or too passive for your liking.

Common Causes of Fans Not Spinning (and How to Fix Each)

  1. Fan-stop mode is active — Check temperature. If it’s below ~50°C, it’s normal. Run a game or a stress test and see if the fans spin up.
  2. Dust and debris — Dust can jam the fan bearings or block the blades. Power down, unplug the PC, and use compressed air to blow out the fans and heatsink. Do not let the fans spin while blowing air; hold them with a finger or a toothpick.
  3. Faulty fan motor or bearing — If one fan spins and the other doesn’t, or if the fan makes a grinding noise before stopping, the fan may be failing. You can often replace the fan module on many cards, or the whole cooler if it’s a reference design.
  4. Loose or disconnected fan cable — Some cards have a small 4-pin fan connector on the PCB. If it’s loose, the fan won’t get power. This is rare but possible after cleaning or if the card was shipped with a loose connector.
  5. Driver or software conflict — A corrupted driver or a third-party tool overriding fan control can keep fans off. Use Display Driver Uninstaller (DDU) in Safe Mode to cleanly remove the driver, then install the latest from NVIDIA, AMD, or Intel.
  6. BIOS/firmware bug — Occasionally a GPU BIOS update fixes fan control issues. Check the manufacturer’s support page for a BIOS update for your exact model.
  7. Hardware failure — If the card is old or has been subjected to heavy stress, the fan controller circuit may have failed. In that case, replacing the card or the cooler is the only fix.

How to Check If Your GPU Is Actually Overheating

If the fans aren’t spinning and you suspect a problem, the first step is to monitor the GPU temperature. Use a tool like MSI Afterburner or HWiNFO to log the temperature during a stress test (e.g., FurMark, Unigine Heaven, or a demanding game). If the temperature climbs above 90°C (194°F) and the fans remain off, the card is at risk of thermal throttling or damage.

If the temperature stays below 70°C (158°F) even under load with fans off, the cooler is doing a great job passively, but that’s unusual. Most cards need at least some fan speed above 60°C. If you see temperatures above 85°C (185°F) with fans off, shut down the system and investigate immediately — dust, thermal paste degradation, or a dead fan are likely culprits.

How to Set a Custom Fan Curve

If you want the fans to spin at all times, or to spin more aggressively at lower temperatures, you can set a custom fan curve. Here’s how to do it with MSI Afterburner (the most common tool):

  1. Download and install MSI Afterburner from the official MSI site.
  2. Open Afterburner and click the fan icon (or the gear icon → Fan tab).
  3. Enable “User Define” and “Enable hardware control and monitoring”.
  4. Adjust the curve points: set 0% at 30°C, 30% at 50°C, 60% at 70°C, 100% at 85°C, for example.
  5. Click Apply and then the save icon to store the profile.
  6. Make sure Afterburner runs at Windows startup (Settings → General → Start with Windows) so the curve stays active.

Note that some cards have a “zero RPM” toggle in the manufacturer’s software that you can turn off to keep fans always spinning.

When to Replace the GPU Fan or Cooler

If you’ve confirmed the fan is dead (no spin even when manually forced via software, no sound, no resistance when you spin it with your finger), you have a few options:

  • Replace just the fan — Many cards use standard 92mm or 100mm fans with a 4-pin connector. You can buy a compatible fan online (search for your card model + “replacement fan”).
  • Replace the whole cooler — For reference-design cards, aftermarket coolers like the Arctic Accelero or a water block can be installed, but this is more involved and can void the warranty.
  • Use a case fan to blow air directly at the GPU — This is a temporary workaround, not a permanent fix.
  • If the card is under warranty — Contact the manufacturer for a repair or replacement. Do not open the card if the warranty seal is intact.

Frequently Asked Questions

Q: Is it normal for GPU fans to not spin at idle?
Yes, most modern GPUs have a fan-stop mode that keeps fans off below ~50°C. This is normal and intended to reduce noise. The fans will spin up under load.

Q: My GPU fans spin then stop after a few seconds. What’s wrong?
This often happens at startup when the card does a fan check (spins briefly) then stops because the GPU is cool. If it happens repeatedly during use, it could be a failing fan bearing or a loose connection.

Q: Can I force my GPU fans to always spin?
Yes, use software like MSI Afterburner to set a custom fan curve with a minimum speed (e.g., 20%) even at low temperatures. Some cards also have a “0 RPM” toggle in their software.

Q: What temperature should my GPU fans start spinning?
Typically around 50–60°C, but it varies by manufacturer and model. Check your card’s specs or the fan curve in software.

Q: How do I clean GPU fans without damaging them?
Power off and unplug the PC. Use compressed air in short bursts, holding the fan blades still with a finger or a toothpick to prevent overspinning. You can also use a soft brush to remove dust.

Q: My GPU fans spin but the GPU still overheats. Why?
Possible causes: dust buildup on the heatsink, dried-out thermal paste, or a failing fan that isn’t spinning at the reported speed. Clean the heatsink, replace the thermal paste (if you’re comfortable), and check fan RPM in software.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →