If your Mac keeps dropping Wi-Fi, won’t join a network, or shows a connected but no internet state, the fix usually starts with forgetting the network, renewing the DHCP lease, or resetting the Wi-Fi stack — and this guide walks through every step in order. These steps cover macOS Ventura through Sequoia and address the most common causes, from router conflicts to system settings.
Why Macs Have Wi-Fi Problems
Macs are generally reliable on Wi-Fi, but they are not immune to connection issues. The most frequent triggers are:
- Stale network preferences — corrupted plist files can cause the Wi-Fi adapter to misbehave.
- DHCP lease conflicts — the router assigns an IP that conflicts with another device.
- DNS issues — wrong or slow DNS servers make it look like the internet is down when Wi-Fi is actually fine.
- Interference — other networks, Bluetooth devices, or microwaves on the same channel.
- macOS updates — sometimes a system update changes network settings or introduces a temporary bug.
Understanding the cause helps you choose the right fix, but you can also just work through the steps below in order — most issues resolve at step 2 or 3.
Quick Fixes to Try First
Start with these low-effort solutions. They resolve a surprising number of issues.
- Toggle Wi-Fi off and on. Click the Wi-Fi icon in the menu bar, turn it off, wait 10 seconds, turn it back on.
- Restart your Mac. A full restart clears temporary glitches in the network stack.
- Restart your router. Unplug it for 30 seconds, plug it back in, wait for it to fully boot (about 2 minutes) before reconnecting.
- Move closer to the router. If the signal is weak, distance is the simplest cause to rule out.
If none of these work, move on to the more specific steps below.
Forget and Rejoin the Network
This is the single most effective fix for a Mac that connects but has no internet, or that repeatedly drops the connection. The Mac stores the network’s password and settings; if those become stale, forgetting the network forces a fresh handshake.
- Open System Settings (or System Preferences on older macOS).
- Click Wi-Fi.
- Next to the network you’re having trouble with, click the Details button (an “i” in a circle).
- Click Forget This Network and confirm.
- Rejoin the network by clicking its name in the Wi-Fi menu and entering the password.
This clears any cached authentication issues and is especially helpful after a router password change.
Renew DHCP Lease and Change DNS
If you’re connected but pages won’t load, your Mac may have a bad IP address or a DNS problem. Renewing the DHCP lease asks the router for a fresh IP, and switching to a public DNS server often fixes slow or failed lookups.
- Go to System Settings → Wi-Fi and click Details next to your network.
- Click TCP/IP.
- Click Renew DHCP Lease. Wait a few seconds.
- If that doesn’t help, click DNS and add a public DNS server like
8.8.8.8(Google) or1.1.1.1(Cloudflare). Remove any existing entries that are slow.
This is also the fix for the “Wi-Fi has a self-assigned IP address” error, which usually appears when the router fails to assign an IP.
Reset the Mac’s Network Settings
When individual fixes fail, a deeper reset of the network configuration often works. This clears all saved Wi-Fi networks, VPN settings, and custom DNS — so you’ll need to rejoin networks afterward.
- Open Finder and press Cmd+Shift+G.
- Type
/Library/Preferences/SystemConfiguration/and press Return. - Find these files and move them to the Desktop (or a backup folder):
com.apple.airport.preferences.plistcom.apple.network.identification.plistcom.apple.wifi.message-tracer.plistNetworkInterfaces.plistpreferences.plist
- Restart your Mac. macOS will recreate these files with fresh defaults.
This is a safe procedure, but it does remove all saved Wi-Fi passwords, so keep your router password handy. If you’re not comfortable with terminal or system files, skip this and try the next step.
Check Router and Interference Issues
Sometimes the problem isn’t your Mac at all. Common router-side issues include:
- Channel congestion — if many neighbors use the same channel, your Wi-Fi slows or drops. Change the router’s channel to 1, 6, or 11 (2.4 GHz) or a less crowded 5 GHz channel.
- Band steering — some routers switch devices between 2.4 and 5 GHz, which can cause drops. Try disabling band steering or connecting to a specific band.
- Old firmware — check the router manufacturer’s site for updates.
- Too many devices — if the router is overloaded, disconnect some devices and test.
To see which channel you’re on, hold the Option key and click the Wi-Fi icon — you’ll see the channel and signal strength. If the signal is consistently low, consider moving the router or using an extender.
Advanced Steps: Safe Mode and SMC Reset
If nothing else works, two deeper resets can fix stubborn Wi-Fi issues.
Safe Mode starts your Mac with only essential extensions and can clear caches that interfere with Wi-Fi. To enter Safe Mode:
- On Apple Silicon: shut down, then hold the power button until “Loading startup options” appears, select your disk, hold Shift, and click “Continue in Safe Mode.”
- On Intel: restart and hold the Shift key immediately after the startup chime.
Once in Safe Mode, test Wi-Fi. If it works, restart normally — the caches are cleared. If it still fails, the issue may be hardware or a third-party app.
SMC reset (System Management Controller) is only for Intel Macs and can fix power-related network issues. On most Intel Macs, shut down, then press and hold Shift+Control+Option on the left side and the power button for 10 seconds, then release all and turn on. Apple Silicon Macs don’t have an SMC, so skip this.
Frequently Asked Questions
Why does my Mac say “No Internet Connection” but other devices work?
This usually means your Mac has a valid IP but DNS or gateway issues. Try the DHCP lease renewal and DNS change steps above. If other devices work, the problem is almost certainly on the Mac side, not the router.
How do I fix Wi-Fi dropping every few minutes on my Mac?
First, forget the network and rejoin. If it persists, check for interference — try switching the router to a different channel. Also disable any VPN or proxy settings in System Settings → Network, as these can cause periodic disconnects.
Will resetting network settings erase my data?
No. The files you move in the network reset only contain Wi-Fi passwords and network configs. Your documents, photos, and apps are untouched. You’ll just need to re-enter Wi-Fi passwords.
Why does my Mac connect to Wi-Fi but not to the internet after a macOS update?
macOS updates sometimes reset network settings or introduce bugs. Try the DHCP renewal and DNS change first. If that fails, reset the network preferences as described. If the issue persists, check Apple’s support forums for known issues with that specific update.
Can a VPN cause Wi-Fi issues on a Mac?
Yes. VPNs route all traffic through a remote server, and if that server is slow or the VPN app crashes, it can appear as a Wi-Fi problem. Disable the VPN and test. If Wi-Fi works, reinstall the VPN or use a different protocol (e.g., IKEv2 instead of OpenVPN).
Is there a hardware issue if my Mac never finds any Wi-Fi networks?
If the Wi-Fi menu shows “Wi-Fi: No Hardware Installed” or you never see any networks, it could be a hardware failure. First try resetting the SMC (Intel) or NVRAM. If that fails, it’s likely a hardware issue — contact Apple Support or an authorized repair center.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Set a Google Play Budget & Stop Accidental Purchases
- Destiny 2 Error Code Anteater: Fixes & Causes
- View Android Photos on Chromebook: Step-by-Step
- Fix Windows Could Not Prepare the Computer to Boot
- Windows 11 Security Settings: Best Config Guide
- Install Custom Recovery on Samsung Galaxy Trend