sodcalculator

10 Tech How-To

Windows 10 Stuck on Restoring Your Previous Version? Fix It

Guide 10-50925 · Updated · Step by step

If your Windows 10 PC is stuck on the “Restoring your previous version of Windows” screen for more than an hour, the update rollback has likely hung due to a driver conflict, corrupted system files, or a stalled service. The most reliable fix is to force a restart, boot into the Windows Recovery Environment (WinRE), and use the Startup Repair or System Restore tool to break the loop. Below are step-by-step methods to get your PC back to a working state, what causes this screen, and how to avoid it in the future.

Why Windows 10 Shows “Restoring Your Previous Version”

Windows 10 automatically creates a rollback point before installing a feature update (like version 22H2) or a large cumulative update. If the new update fails to install correctly, the system attempts to revert to the previous build. The restoration process can take 10 to 30 minutes on a typical hard drive, but it can stall if:

  • A driver or third-party service conflicts with the rollback.
  • The update files are corrupted (e.g., a failed download).
  • The system drive has insufficient free space (less than 10 GB).
  • Power loss or a forced shutdown interrupted the original update.

When the process hangs, the screen may show a spinning circle or a percentage that never advances. The system is not necessarily frozen—it may be waiting for a service that has timed out. Waiting another 30 minutes is reasonable, but if nothing changes after that, proceed with the fixes below.

Before You Start: Safe Steps to Avoid Data Loss

Your personal files (documents, photos, downloads) are usually not touched by the rollback, but it is still wise to prepare. If you can access the desktop or the Ctrl+Alt+Del screen, back up critical files to an external drive or cloud storage. If the system is completely unresponsive, you may need to create a Windows 10 installation USB on another PC to reach recovery tools. Do not attempt to reset the PC or reinstall Windows before trying the less invasive repairs, as those can erase your installed programs or files.

Method 1: Force Restart and Use Startup Repair

If the screen has been stuck for over an hour, the first step is to force a restart. Press and hold the power button for 10 seconds until the PC shuts down. Turn it back on and immediately start tapping the F11 key (or the key your manufacturer specifies, often F8, Esc, or F12) to enter the Windows Recovery Environment. If you miss the window, the PC may boot normally or return to the stuck screen; repeat the force shutdown and try again.

Once in WinRE, follow these steps:

  1. Choose Troubleshoot > Advanced options > Startup Repair.
  2. Select your account and enter your password if prompted.
  3. Let the tool diagnose and fix boot issues. It may take 10–15 minutes.
  4. If it reports “Startup Repair couldn’t repair your PC,” go back to Advanced options and try System Restore.

System Restore uses a restore point created before the update. Pick the most recent one (usually the day before the update) and follow the prompts. This does not affect your personal files, but it will remove recently installed drivers and programs.

Method 2: Boot into Safe Mode and Remove Problematic Updates

If Startup Repair fails, booting into Safe Mode can let you uninstall the failed update or disable conflicting services. From WinRE, go to Troubleshoot > Advanced options > Startup Settings > Restart. After the restart, press 4 or 5 to enter Safe Mode (with or without networking).

Once in Safe Mode:

  • Open Settings > Update & Security > Windows Update > View update history > Uninstall updates.
  • Look for the most recent feature update (e.g., “Feature Update to Windows 10”) and uninstall it.
  • If you cannot uninstall, open Command Prompt as administrator and run dism /online /cleanup-image /restorehealth followed by sfc /scannow to repair system files.
  • Restart normally. The rollback screen should no longer appear.

Method 3: Use Command Prompt to Reset the Update Process

If Safe Mode is not accessible, you can use the Command Prompt from WinRE to manually reset the Windows Update components. Select Troubleshoot > Advanced options > Command Prompt. Then run these commands one by one, pressing Enter after each:

  1. net stop wuauserv (stops the Windows Update service)
  2. net stop cryptSvc (stops the cryptographic service)
  3. net stop bits (stops the Background Intelligent Transfer service)
  4. ren C:\Windows\SoftwareDistribution SoftwareDistribution.old (renames the update cache)
  5. ren C:\Windows\System32\catroot2 catroot2.old (renames the signature cache)
  6. net start wuauserv (restarts the services)
  7. net start cryptSvc
  8. net start bits
  9. Type exit and restart the PC.

This clears the corrupted update files. Windows will attempt the update again on the next boot, but you can pause updates in Settings to prevent it from immediately retrying.

When to Reset This PC or Reinstall Windows

If none of the above methods work, the last resort is to reset Windows. From WinRE, go to Troubleshoot > Reset this PC. Choose Keep my files to preserve personal documents, but be aware this removes installed apps and drivers. If the system is too corrupted, you may need to use a Windows 10 installation USB to perform a clean install. This will erase everything, so only do it after backing up your data (you can access files via the Command Prompt if needed, using copy commands to an external drive).

How to Prevent This from Happening Again

To reduce the chance of future rollback hangs:

  • Keep at least 20 GB of free space on your system drive (SSD or HDD).
  • Update drivers (especially graphics and chipset) from the manufacturer’s website before installing a feature update.
  • Temporarily disable third-party antivirus software during the update.
  • Use the Update Assistant or Media Creation Tool to manually install a feature update instead of waiting for Windows Update.
  • Create a system restore point manually before any major update.

Frequently Asked Questions

How long should the “Restoring your previous version” screen take?

On a typical hard drive, it can take 10 to 30 minutes. On an SSD, it is usually faster. If it exceeds 45 minutes without any change, the process is likely stuck and you should intervene.

Will I lose my files if I force a restart during the rollback?

Usually not. The rollback process is designed to revert system files only. Your personal files in the user folders remain intact. However, if the system was interrupted mid-rollback, there is a small risk of file corruption, which is why backing up is recommended.

Can I skip the rollback and just boot to the desktop?

No, the rollback is a critical step to restore a working system. Skipping it may leave Windows in an inconsistent state. Use the recovery tools to complete or undo the rollback instead.

Why does the rollback happen after every update?

If it happens repeatedly, a specific driver or service is incompatible with the new update. Check the manufacturer’s website for updated drivers, or use the Show or hide updates troubleshooter tool from Microsoft to temporarily block the problematic update.

Is it safe to use System Restore during the rollback?

Yes, System Restore is a standard recovery tool. It will revert system files and settings to a previous point, but it will not delete your documents, photos, or other personal files. It may remove recently installed apps or drivers.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →