sodcalculator

10 Tech How-To

Windows 10 Updates Check Issue: Fixes That Work

Guide 10-56607 · Updated · Step by step

If your Windows 10 PC is stuck on “Checking for updates” for hours, or it fails with an error code, the problem is usually a corrupted update cache or a stalled Windows Update service. This article explains why the check hangs, how to force a clean check, and what to do when the standard fixes don’t work.

Why Windows 10 Update Check Gets Stuck

Windows 10 checks for updates by contacting Microsoft’s servers, downloading a list of available patches, and comparing it with what’s installed. This process normally takes a few minutes. When it hangs, one of these is usually at fault:

  • Corrupted update cache – The temporary files Windows uses to verify updates can become damaged, causing the check to loop.
  • Windows Update service stopped – The background service that manages downloads may have crashed or been disabled by third-party software.
  • Network or DNS issues – A firewall, VPN, or proxy can block the connection to Microsoft’s update servers.
  • Disk space shortage – Windows needs several gigabytes of free space to stage updates; if the drive is full, the check stalls.
  • Pending reboot or previous failed update – A half-installed update can leave the system in a state where it cannot check for new ones.

First Steps: Restart the Update Services

The quickest fix is to restart the Windows Update service and clear its cache. This resolves most “stuck checking” issues without affecting your files.

  1. Press Win + R, type services.msc, and press Enter.
  2. Scroll to Windows Update. Right-click it and select Stop.
  3. Also stop Background Intelligent Transfer Service (BITS).
  4. Open File Explorer and go to C:\Windows\SoftwareDistribution. Delete everything inside that folder (you may need admin permission).
  5. Go back to Services, right-click both services, and select Start.
  6. Restart your PC, then try checking for updates again.

If the service won’t start, run the Windows Update Troubleshooter from Settings > Update & Security > Troubleshoot. It automatically detects and repairs common service problems.

Use the Windows Update Troubleshooter

Windows 10 includes a built-in troubleshooter specifically for update problems. It scans for corrupted files, misconfigured settings, and service failures, then applies fixes automatically.

  1. Open Settings (Win + I).
  2. Go to Update & Security > Troubleshoot.
  3. Select Windows Update and click Run the troubleshooter.
  4. Follow the prompts. It may take several minutes.

This tool is safe and does not remove personal files. If it finds a problem, it will usually fix it automatically. If it doesn’t, it will tell you what to do next.

Check Disk Space and System Files

Windows needs at least 20 GB of free space on the system drive (C:) to install feature updates, and about 5 GB for monthly patches. To check free space, open File Explorer and look at “This PC.” If you’re low, run Disk Cleanup:

  1. Search for “Disk Cleanup” in the Start menu and open it.
  2. Select the drive (usually C:).
  3. Click Clean up system files.
  4. Check “Windows Update Cleanup” and “Temporary files,” then click OK.

Corrupted system files can also block updates. Open Command Prompt as administrator and run:

sfc /scannow
DISM /Online /Cleanup-Image /RestoreHealth

The first command checks and repairs protected system files. The second repairs the Windows image itself. Let both finish completely – they can take 15–30 minutes.

Reset Windows Update Components Manually

If the troubleshooter and cache reset fail, you can manually reset all update components. This is more thorough and fixes deeper corruption.

  1. Open Command Prompt as administrator.
  2. Stop the services by typing these commands one by one, pressing Enter after each:
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
  1. Rename the update cache folders:
ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 Catroot2.old
  1. Restart the services:
net start wuauserv
net start cryptSvc
net start bits
net start msiserver
  1. Restart your PC and check for updates again.

This process is safe – the .old folders are just backups. If the new check works, you can delete them later to free space.

When to Use the Update Assistant or Media Creation Tool

If the built-in check still fails, you can bypass it entirely by using Microsoft’s official tools. These download the latest feature update directly and install it, without relying on the normal update check.

  • Windows 10 Update Assistant – Downloads and installs the latest feature update on your current PC. It’s a small executable you run, and it walks you through the process.
  • Media Creation Tool – Creates a bootable USB or ISO file. You can run it from within Windows and choose “Upgrade this PC now” to keep your files and apps.

Both tools are official and free. They are the recommended fallback when the update check is broken and you don’t want to reinstall Windows. Make sure you back up important files first, even though the upgrade should preserve them.

Common Error Codes and What They Mean

Sometimes the check fails with a specific error instead of hanging. Here are the most common ones and their typical fixes:

  • 0x80070005 – Access denied. Run the troubleshooter, or check your antivirus permissions.
  • 0x80072efd – Network problem. Disable VPN, proxy, or firewall temporarily and try again.
  • 0x80240034 – Update download failed. Clear the SoftwareDistribution folder and retry.
  • 0x800f081f – Missing update files. Run DISM and then check again.

If you see an error not listed, search for the exact code on Microsoft’s support site. Most codes have a dedicated fix page.

Frequently Asked Questions

Why does Windows 10 say “Checking for updates” for hours?

This usually means the update service is stuck due to a corrupted cache or a stalled background process. Restarting the Windows Update service and clearing the SoftwareDistribution folder fixes it in most cases.

Is it safe to delete the SoftwareDistribution folder?

Yes. Windows recreates it automatically. It only contains temporary update files, not your personal data. Just make sure the Windows Update service is stopped before deleting.

Will resetting Windows Update components remove my files?

No. The manual reset only touches update-related services and folders. Your documents, photos, and installed programs are unaffected.

How long should a normal update check take?

Typically 2–10 minutes on a decent connection. If it takes longer than 30 minutes, assume something is wrong and try the fixes above.

Can I skip a problematic update?

Yes, but only temporarily. You can pause updates in Settings for up to 35 days. However, you should eventually install all critical security patches to keep your system safe.

What if none of these fixes work?

If the update check still fails after all steps, consider using the Media Creation Tool to do an in-place upgrade. This reinstalls Windows while keeping your files. As a last resort, a clean install will definitely fix it, but it removes everything.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →