The 0x800ccc92 error in Windows Live Mail and Outlook means your email client was logged out of the server, usually because the password was rejected or the account was locked after too many failed attempts. The fix is to re-enter your password, verify your server settings, and if needed, unlock the account through your email provider’s webmail or security page.
What Does Error 0x800ccc92 Actually Mean?
This error code appears when the email client tries to authenticate with the incoming mail server (POP3 or IMAP) and the server refuses the credentials. The full message often reads: “The server responded: -ERR Logon failure.” or “An unknown error occurred. Subject ‘Account: ‘…’ Server: ‘…’ Protocol: POP3, Server Response: ‘-ERR Logon failure’, Port: 110, Secure(SSL): No.”
It is not a network or firewall problem. The client reached the server, but the server said “no” to the username/password combination. This is different from 0x800ccc0f (timeout) or 0x800ccc90 (authentication error with more general causes). The 92 code specifically points to a logon failure on the server side.
Why Does It Happen? Common Causes
Several situations trigger this error, and knowing which one applies saves time:
- Wrong password – The most common cause. You changed your password on the web, or the saved password in the client is old.
- Account locked – After multiple failed attempts (often from an old device or an app trying to sync), the provider locks the account for security.
- Outdated client – Windows Live Mail was discontinued in 2017 and no longer receives security updates. Older Outlook versions (like Outlook 2010) may also have trouble with modern authentication methods.
- Two-factor authentication (2FA) – If you enabled 2FA, your regular password won’t work. You need an app-specific password generated in your account settings.
- Server setting mismatch – For example, the client is set to use POP3 when the provider now only supports IMAP, or the authentication method is wrong.
- Repeated sync attempts – A phone or another computer with the old password keeps trying and locks the account.
How to Fix It: Step-by-Step
Follow these steps in order. Most users resolve the error at step 1 or 2.
- Update the password in the client – Go to Account Settings (or Tools > Accounts in Windows Live Mail), select your email account, and enter the current password. Make sure there are no extra spaces. If you don’t know the current password, reset it via your provider’s webmail first.
- Check if the account is locked – Log in to your email through a web browser. If you can’t log in even there, the account is locked. Follow your provider’s unlock process (usually a verification code sent to a recovery phone or email). Wait 10–15 minutes after unlocking before trying the client again.
- Generate an app password if you use 2FA – Go to your provider’s security settings, create an app password, and use that in the email client. The regular password will not work.
- Verify server settings – Compare your incoming and outgoing server names, ports, and SSL settings with the ones listed on your provider’s help page. Common settings: IMAP port 993 with SSL, POP3 port 995 with SSL, SMTP port 465 or 587 with SSL/TLS.
- Delete and re-create the account – If the above fails, remove the account from the client and add it again. This clears any corrupted cached credentials.
- Update or switch client – Since Windows Live Mail is no longer supported, consider moving to the built-in Windows Mail app, Outlook (Microsoft 365), or Thunderbird. Newer clients handle modern authentication better.
Windows Live Mail vs Outlook: Differences in the Error
Windows Live Mail (2012 version) and classic Outlook (2010, 2013, 2016) both show 0x800ccc92, but the underlying cause can differ. Windows Live Mail is stuck with basic authentication only, so if your provider disabled basic auth (like Microsoft did for Outlook.com in 2024), you’ll get this error no matter what password you enter. Outlook 2013 and later support OAuth2, but you may need to enable it in account settings. If you’re using Outlook 2010, it’s in the same boat as Windows Live Mail – no modern auth support.
For Outlook.com accounts specifically, Microsoft has been turning off basic authentication for personal accounts. The fix is to use an app that supports OAuth2 (like the Windows Mail app or Outlook 2016+) or create an app password if you must use an older client.
Preventing the Error in the Future
Once you’ve fixed the error, take these steps to avoid a repeat:
- Update your password in all devices at the same time. If you change it, change it everywhere immediately.
- If you use 2FA, use app-specific passwords for each device, and revoke unused ones.
- Remove old devices from your account’s trusted list to prevent them from locking you out.
- Consider migrating from Windows Live Mail to a supported client. You’ll get security updates and modern authentication.
- Set your client to check mail less frequently (e.g., every 15 minutes instead of every 5) to reduce the chance of triggering lockouts.
Frequently Asked Questions
Can I fix 0x800ccc92 without changing my password?
Yes, if the password is correct but the server is rejecting it due to 2FA or basic auth being disabled. In that case, you need to create an app password or switch to a client that supports OAuth2. If the password is actually wrong, you must reset it.
Why does this error keep coming back after I fix it?
Usually because another device (like a phone) still has the old password and keeps trying, locking the account again. Check all devices and update or remove the account from them. Also, if you’re using Windows Live Mail, the client may not support the authentication method your provider now requires, so the error will return.
Is 0x800ccc92 the same as 0x800ccc90?
No. 0x800ccc90 is a general authentication error (“The server rejected your logon”), while 0x800ccc92 specifically means the server responded with a logon failure (usually wrong credentials or locked account). The fix is similar, but 0x800ccc92 is more definitive about the cause.
Will using a VPN or changing DNS fix this error?
No. This is an authentication error, not a connectivity error. A VPN or DNS change won’t help because the client is already reaching the server. Focus on credentials and account status.
What is the best replacement for Windows Live Mail?
The built-in Windows Mail app (Windows 10/11) is the simplest. For more features, use Outlook (Microsoft 365) or Mozilla Thunderbird. All three support modern authentication and are actively maintained. You can import your Windows Live Mail contacts and emails into any of them.
Does this error affect both incoming and outgoing mail?
Usually only incoming mail, because the error occurs during the logon to the POP3/IMAP server. Outgoing mail (SMTP) may still work if the SMTP server uses different authentication. However, if the account is locked, both will fail.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Slow Internet Lag on Samsung Galaxy Note
- iOS 18 Safari Not Working? Fixes That Help
- How to Check Your Linux Kernel for Spectre
- iPhone Safe Mode: How to Enable or Disable It
- How to Get iOS 17 on iPhone X (Safe Methods)
- Fix Gmail IMAP Error in Outlook: Step-by-Step