For the best balance of visual quality and higher FPS in Dragon’s Dogma 2 on PC, start with the High preset, then manually lower Ambient Occlusion to Off (or Low) and Grass Quality to Medium. These two settings have the largest impact on frame rate in dense outdoor areas, and the visual difference is minor during normal gameplay.
What to Look For
When tuning Dragon’s Dogma 2 for higher FPS, focus on settings that stress the GPU and CPU the most. The game’s open world is heavily populated with NPCs, foliage, and dynamic lighting, so the following criteria matter most:
- GPU-bound settings: Resolution, ray tracing (if enabled), ambient occlusion, shadows, and texture quality directly affect GPU load. Lowering these gives the biggest FPS gains.
- CPU-bound settings: Grass quality and NPC density affect CPU performance, especially in towns and during combat with many enemies. Lowering these can help with frame drops and stutters.
- Upscaling: DLSS (Nvidia), FSR (AMD), and XeSS (Intel) are essential for modern GPUs. They render at a lower internal resolution and upscale, giving large FPS boosts with minimal visual loss.
- VRAM usage: Texture quality and ray tracing consume VRAM. If you have 8GB or less, keep textures at High and avoid ray tracing to prevent hitches.
- Consistency: A stable 60 FPS feels better than a fluctuating 80 FPS. Prioritize settings that prevent drops in busy areas.
Recommended Settings Options
1. Balanced High (Best Overall for Most PCs)
Settings: Preset High, then set Ambient Occlusion to Off, Grass Quality to Medium, and Shadows to High. Enable DLSS/FSR/XeSS in Quality mode.
Strengths: Maintains good visual fidelity with a significant FPS boost (often 20-30% higher than Ultra). Works well on mid-range GPUs like the RTX 3060, RTX 4060, or RX 7600.
Trade-offs: Ambient occlusion off makes shadows look flatter, and grass is less dense, but both are barely noticeable in motion.
Best for: Most players with a 6GB+ VRAM GPU who want a smooth 60 FPS at 1080p or 1440p without sacrificing too much detail.
2. Competitive FPS (Max Frame Rate)
Settings: Preset Low, then set Texture Quality to High (if VRAM allows), Grass Quality to Low, and Ambient Occlusion to Off. Enable DLSS/FSR/XeSS in Performance mode.
Strengths: Maximizes FPS, often doubling frame rates compared to Ultra. Ideal for high refresh rate monitors (120Hz+) or older GPUs.
Trade-offs: Noticeably reduced visual quality: pop-in, flat lighting, and sparse grass. The world looks less immersive.
Best for: Players who prioritize frame rate above all else, or those with GTX 1660-class GPUs or lower.
3. Ray Tracing Off (Essential for Stable FPS)
Settings: Keep Ray Tracing Off (the default). The option only appears if you have a compatible GPU, but it’s a major FPS drain.
Strengths: Ray tracing in Dragon’s Dogma 2 is limited to ambient occlusion and shadows, and the visual improvement is subtle. Turning it off can improve FPS by 15-25% in towns and interiors.
Trade-offs: Slightly less realistic lighting, but most players won’t notice the difference without a side-by-side comparison.
Best for: Everyone. The performance cost is not worth the minimal visual gain, especially on mid-range GPUs.
4. Upscaling: DLSS/FSR/XeSS Quality
Settings: Enable DLSS (Nvidia RTX), FSR (AMD and others), or XeSS (Intel Arc) in Quality mode. If you need more FPS, try Balanced or Performance.
Strengths: These upscalers boost FPS by 20-40% with minimal visual difference, especially at 1440p and 4K. They also help with CPU-bound scenarios by reducing render resolution.
Trade-offs: Slight image softening, and FSR/XeSS can cause shimmering on fine details. DLSS Quality is generally the best-looking but requires an RTX GPU.
Best for: Any GPU that supports them. If you have an RTX card, use DLSS; otherwise, use FSR or XeSS.
5. VRAM-Safe Textures (For 8GB GPUs)
Settings: Set Texture Quality to High (not Maximum), and keep Grass Quality at Medium or Low. Avoid ray tracing entirely.
Strengths: Prevents stuttering and texture pop-in caused by VRAM overflow. High textures still look sharp at 1080p and 1440p.
Trade-offs: Maximum textures are slightly sharper, but the difference is hard to spot in motion. On 8GB cards, Maximum can cause frame drops.
Best for: Owners of RTX 3060, RTX 4060, RX 6600, or any 8GB GPU.
6. CPU-Friendly Grass (For Older CPUs)
Settings: Set Grass Quality to Low or Medium. This is the most CPU-demanding setting in the game.
Strengths: Reduces stutter in towns and during combat with many enemies. Low grass also improves visibility in some areas.
Trade-offs: The ground looks barer, and some areas lose their lush feel. But the FPS stability gain is worth it on CPUs like the Ryzen 5 3600 or Intel i5-10400.
Best for: Players with older or mid-range CPUs who experience frame drops in crowded areas.
How to Choose
Start by identifying your GPU and CPU. If you have a modern mid-range card (RTX 3060 or better), use the Balanced High preset. If you have a lower-end GPU (GTX 1660 or RX 580), use Competitive FPS. For 8GB VRAM GPUs, always cap texture quality at High. If you have an older CPU (pre-2020), lower grass quality first before touching other settings.
Common trade-offs: lowering shadows and ambient occlusion gives a big FPS boost with minimal visual loss, while lowering texture quality hurts visuals more but helps VRAM. Upscaling is always worth enabling, but Quality mode is the sweet spot. If you still need more FPS, drop to Balanced or Performance mode.
Test in a busy town like Vernworth, as that’s where the game is most demanding. Adjust one setting at a time and monitor your FPS with the in-game benchmark or an overlay.
Frequently Asked Questions
Is ray tracing worth turning on in Dragon’s Dogma 2?
No. The ray tracing only affects ambient occlusion and shadows, and the visual difference is subtle. It can cut FPS by 20% or more, so keep it off unless you have a high-end GPU and a lot of headroom.
Does DLSS look better than FSR in this game?
Generally, yes. DLSS tends to produce sharper images with less shimmering, especially at lower internal resolutions. However, FSR 3 (if available) is close and works on any GPU.
Why do I get stutters in towns even with high FPS?
This is often CPU-related. The game loads many NPCs and their AI in towns. Lowering Grass Quality and NPC Density (if the option exists) can help. Also, ensure the game is installed on an SSD to reduce asset streaming hitches.
What is the best upscaling mode to use?
Quality mode is the best balance of image quality and FPS. If you need more performance, try Balanced, then Performance. Avoid Ultra Performance unless you’re at 4K and desperate for FPS.
Should I cap my FPS with vsync or a frame limiter?
Yes. Capping to your monitor’s refresh rate (e.g., 60 or 144) can reduce stutter and GPU load. Use the in-game cap or an external tool like RTSS. This also helps keep temperatures down.
Does the game have a built-in benchmark?
Yes, Dragon’s Dogma 2 includes a benchmark tool in the graphics settings. Use it to test your settings before starting the game. It runs through a representative scene and gives an average FPS.
Bottom Line
For the best FPS in Dragon’s Dogma 2, use the High preset with Ambient Occlusion off, Grass Quality on Medium, and DLSS/FSR in Quality mode. This combination gives a significant performance boost while keeping the game looking great. If you still need more FPS, lower shadows to Medium and switch upscaling to Balanced. Avoid ray tracing and keep textures at High on 8GB GPUs. Test with the in-game benchmark and adjust to your preference.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Play Kodi on Smart TV from PC
- Hogwarts Legacy Microsoft Visual C Runtime Error Fix
- Set Up UPI Payments Through WhatsApp
- Pair Oppo Enco Earbuds with Android, iPhone & Windows
- Fix Administrator Account Disabled Error in Windows 11
- Factory Reset on Samsung Galaxy: What It Erases