sodcalculator

10 Tech How-To

Pair Oppo Enco Earbuds with Android, iPhone & Windows

Guide 10-56778 · Updated · Step by step

This guide walks you through pairing Oppo Enco earbuds (including Enco Air, Enco Free, Enco X, and similar models) with Android phones, iPhones, and Windows PCs. You’ll learn the exact steps for each device type, common mistakes to avoid, and fixes for when pairing fails. Before starting, make sure your earbuds are charged and in their case.

What You’ll Need

  • Your Oppo Enco earbuds and charging case
  • The device you want to pair with (Android, iPhone, or Windows PC)
  • Bluetooth enabled on the device (usually in Settings)
  • Optional: The HeyMelody app (Android) or Oppo Enco app (iOS) for firmware updates and extra controls

Step-by-Step

Pairing with Android (including Oppo, OnePlus, Samsung, etc.)

  1. Put earbuds in pairing mode: Place both earbuds in the charging case and keep the lid open. Press and hold the button on the case for about 2 seconds until the LED indicator starts blinking white (or red/white alternately, depending on model). The earbuds are now discoverable.
  2. Open Bluetooth settings: On your Android phone, go to Settings > Bluetooth and toggle Bluetooth on.
  3. Scan for devices: Tap “Pair new device” or look under “Available devices”. Your earbuds should appear as something like “OPPO Enco X” or “Enco Air2”.
  4. Select and confirm: Tap the name of your earbuds. If a pairing request appears, confirm it. You may hear a voice prompt saying “Connected” or see a notification.
  5. Optional – install companion app: For firmware updates, equalizer settings, and touch controls, install the HeyMelody app from the Google Play Store. Open the app, allow Bluetooth permission, and it will detect your earbuds automatically.

Pairing with iPhone (iOS)

  1. Put earbuds in pairing mode: Same as above: keep earbuds in the case, lid open, press and hold the button for ~2 seconds until the LED blinks white.
  2. Open iOS Bluetooth settings: Go to Settings > Bluetooth and make sure Bluetooth is on.
  3. Wait for the earbuds to appear: Under “Other Devices”, you should see your earbuds listed. If not, wait a few seconds or tap “Bluetooth” to refresh.
  4. Tap to pair: Tap the name of your earbuds. iOS will connect without asking for a passcode (default is 0000 if it does).
  5. Optional – install Oppo Enco app: Download the Oppo Enco app from the App Store. It lets you check battery levels, update firmware, and customize controls. Note: Some features may be limited compared to Android.

Pairing with Windows 10/11

  1. Put earbuds in pairing mode: Same as above: earbuds in case, lid open, hold button until LED blinks white.
  2. Open Windows Bluetooth settings: Click the Start button, then Settings (gear icon) > Bluetooth & devices > Add Bluetooth or other device.
  3. Choose Bluetooth: In the pop-up window, select Bluetooth.
  4. Select your earbuds: Wait for the list to populate. Click on your earbuds’ name (e.g., “OPPO Enco Free”). Windows will show “Connecting” and then “Connected”.
  5. Set as default (optional): After pairing, right-click the speaker icon in the taskbar, go to Sound settings, and ensure your earbuds are selected as the output and input device if you plan to use the microphone.

Common Mistakes

  • Not putting earbuds in pairing mode: If the earbuds are already connected to another device, they won’t be discoverable. Always place them in the case and hold the button until the LED blinks.
  • Forgetting to clear previous connections: If your earbuds were previously paired with another device, they may auto-connect to that device first. Turn off Bluetooth on that device or unpair the earbuds from it.
  • Using the wrong app: The HeyMelody app is for Android, while the Oppo Enco app is for iOS. Using the wrong app may not detect your earbuds.
  • Bluetooth off or not discoverable: On Windows, make sure Bluetooth is enabled and the device is in pairing mode (some PCs have a physical switch or function key).
  • Interference from other devices: Other Bluetooth devices nearby can interfere. Move away from crowded Wi-Fi routers or other Bluetooth devices.

Tips

  • Keep firmware updated: Use the companion app to check for firmware updates. Updates often fix connectivity issues and improve battery life.
  • Reset earbuds if needed: If pairing consistently fails, reset the earbuds: place them in the case, keep the lid open, and press and hold the button for about 10 seconds until the LED flashes red three times. Then try pairing again.
  • Use one earbud at a time: Some models allow using a single earbud. To pair a single earbud, remove it from the case and put it in pairing mode individually.
  • Check battery level: Low battery can cause connection drops. Charge the case and earbuds fully before troubleshooting.
  • For Windows, use the Bluetooth toggle in the action center: Click the Bluetooth icon in the taskbar to quickly turn it on/off, which can help refresh the scan.

Troubleshooting

Earbuds not showing up in Bluetooth list

  • Make sure the earbuds are in pairing mode (LED blinking).
  • Move the device closer to the earbuds (within 1 meter).
  • Turn Bluetooth off and on again on your device.
  • Restart the device (phone/PC).
  • Reset the earbuds as described above.

Pairing fails or times out

  • Check if the earbuds are already connected to another device and disconnect them.
  • Clear the Bluetooth cache on Android: Settings > Apps > Show system apps > Bluetooth > Storage > Clear cache (and maybe Clear data).
  • On Windows, run the Bluetooth troubleshooter: Settings > System > Troubleshoot > Other troubleshooters > Bluetooth.

Earbuds connect but no sound

  • On Windows, check the sound output device: click the speaker icon in the taskbar and select your earbuds.
  • On Android/iOS, check media volume and ensure the earbuds are selected as the audio output (usually automatic).
  • Try playing audio from a different app to rule out app-specific issues.

One earbud not working

  • Place both earbuds back in the case, close the lid for 10 seconds, then remove them again.
  • Check if the earbud is charged (LED indicator on the earbud).
  • Reset the earbuds.

Microphone not working on Windows

  • Right-click the speaker icon in the taskbar, select Sound settings, then under Input choose your earbuds.
  • Check if the earbuds are set as the default communication device in Sound Control Panel (under Recording tab).

Frequently Asked Questions

Can I pair Oppo Enco earbuds with two devices at once?

Most Oppo Enco earbuds do not support multipoint pairing (connecting to two devices simultaneously). However, you can switch between devices by disconnecting from one and connecting to another. Some newer models may support dual connection – check your user manual.

Why won’t my Oppo Enco earbuds enter pairing mode?

If the LED doesn’t blink white after holding the button, the earbuds may be low on battery. Charge them for at least 10 minutes. If they still don’t respond, try resetting them: hold the button for 10 seconds until the LED flashes red three times.

Do I need the HeyMelody app to use my Oppo Enco earbuds?

No, the app is optional. You can pair and use the earbuds without it. The app adds features like firmware updates, custom equalizer, and touch control customization.

How do I reset my Oppo Enco earbuds?

Place both earbuds in the charging case, keep the lid open, and press and hold the button on the case for about 10 seconds until the LED flashes red three times. This clears all previous pairings and resets the earbuds to factory settings.

Can I use Oppo Enco earbuds with a laptop that doesn’t have Bluetooth?

No, Bluetooth is required. If your laptop lacks Bluetooth, you can use a USB Bluetooth adapter (dongle) to add Bluetooth capability.

Why does my Oppo Enco earbuds keep disconnecting from Windows?

This can happen due to Bluetooth driver issues or power saving settings. Update your Bluetooth driver via Device Manager, and in Windows settings, go to Bluetooth & devices > Devices, click on your earbuds, and select Remove device, then pair again. Also, disable Bluetooth power saving: Device Manager > Bluetooth > right-click your adapter > Properties > Power Management > uncheck “Allow the computer to turn off this device to save power”.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →