sodcalculator

10 Tech How-To

Reset Network Adapter in Windows 10

Guide 10-56683 · Updated · Step by step

If your Wi-Fi keeps dropping, the internet is slow, or you can’t connect at all, resetting the network adapter in Windows 10 often fixes it. This clears the adapter’s configuration, renews your IP address, and flushes the DNS cache—without affecting your personal files. You’ll need administrative access to your PC (you’ll be asked for permission).

What You’ll Need

  • An administrator account on the Windows 10 PC
  • Your Wi-Fi network name and password (you’ll need to reconnect after the reset)

Step-by-Step

  1. Save your work and close all programs. The reset will briefly disconnect you from the internet.
  2. Open the Settings app. Click the Start button (Windows icon) in the bottom-left corner, then click the gear icon (Settings). Alternatively, press Windows + I.
  3. Go to Network & Internet. In the Settings window, click on “Network & Internet.”
  4. Open Network reset. In the left sidebar, scroll down and click “Status.” Then, on the right side, scroll down until you see “Network reset.” Click it.
  5. Review the warning. Windows will display a message explaining that this will remove and reinstall all your network adapters and reset other network components to their default settings. It also notes that you may need to reinstall VPN software or other networking software. Read it, then click “Reset now.”
  6. Confirm the action. A confirmation dialog will appear. Click “Yes” to proceed.
  7. Wait for the reset to complete. Windows will begin the process. It may take a minute or two. Your screen might flicker, and you’ll lose network connectivity.
  8. Restart your PC. After the reset finishes, Windows will prompt you to restart. Click “Close” and then restart your computer manually (Start → Power → Restart). It’s important to restart, not shut down and turn on, to ensure the changes take effect properly.
  9. Reconnect to your Wi-Fi. After restarting, click the network icon in the system tray (bottom-right corner), select your Wi-Fi network, and enter your password to reconnect.

Common Mistakes

  • Skipping the restart. Some users try to use the network immediately after the reset without restarting. This often leaves the adapter in a half-configured state, and the problem persists. Always restart.
  • Not saving VPN or proxy settings. The reset removes any custom network settings, including VPN connections, static IP addresses, and proxy configurations. Make sure you have the details written down before you reset.
  • Using “Reset now” while on a metered connection. If you’re on a limited data plan, the reset itself doesn’t use much data, but the reinstallation of drivers might trigger Windows Update. It’s safer to be on a wired connection or have a backup.
  • Confusing Network reset with “Reset this PC.” Network reset only affects network components. It does not remove your files or apps. Don’t worry about that.

Tips

  • Try a simpler fix first. Before doing a full network reset, try restarting your router and modem. Unplug them for 30 seconds, plug them back in, and wait for the lights to stabilize.
  • Use the “Network troubleshooter.” Windows has a built-in troubleshooter that can often identify and fix common issues. Go to Settings → Update & Security → Troubleshoot → Additional troubleshooters → Network Adapter. Run it before resetting.
  • Update your network drivers. After the reset, Windows will reinstall the drivers, but it’s a good idea to check for the latest drivers from your PC manufacturer’s website, especially if you built your own PC.
  • Forget and re-add your Wi-Fi network. If you still have issues after reconnecting, go to Settings → Network & Internet → Wi-Fi → Manage known networks, click on your network, and select “Forget.” Then reconnect from scratch.

Troubleshooting

If the reset doesn’t work or you still can’t connect:

  • Check if other devices work. If your phone or another laptop can connect to the same Wi-Fi, the problem is likely with your PC. If not, the issue is with your router or internet service provider.
  • Run the network troubleshooter again. After the reset, run it again—it may now find new issues that were masked before.
  • Manually renew your IP address. Open Command Prompt as administrator (type “cmd” in Start, right-click, and select “Run as administrator”). Type ipconfig /release, press Enter, then type ipconfig /renew and press Enter.
  • Flush DNS. In the same Command Prompt, type ipconfig /flushdns and press Enter. This clears the DNS cache, which can sometimes be corrupted.
  • Disable and re-enable the adapter. Go to Control Panel → Network and Sharing Center → Change adapter settings. Right-click your Wi-Fi adapter and select “Disable.” Wait a few seconds, then right-click and select “Enable.”
  • Check if the adapter is physically disabled. Some laptops have a physical switch or a function key (like F2) that turns Wi-Fi on/off. Make sure it’s not toggled off.
  • If all else fails, use System Restore. If you have a restore point from before the problem started, you can roll back your system. Search for “Create a restore point” in Start, open the System Properties, click “System Restore,” and follow the prompts.

Frequently Asked Questions

Will resetting the network adapter delete my files?

No, it only resets network settings and reinstalls network drivers. Your personal files, photos, documents, and installed programs are untouched.

Do I need to reinstall my VPN after a network reset?

Yes, the reset removes all network-related software, including VPN clients. You’ll need to reinstall them from the official website or installer you used originally.

How long does the network reset take?

The actual reset process takes about 1-2 minutes, but you’ll also need to restart your PC, which adds a couple more minutes. Plan for about 5 minutes total.

Will I lose my saved Wi-Fi passwords?

Yes, the reset removes all saved Wi-Fi profiles. You’ll need to re-enter the password for each network you want to join.

Can I undo a network reset?

There’s no direct undo button. However, you can manually reconfigure your network settings (IP address, DNS, proxy) to what they were before, if you know them. For most users, it’s easier to just set up the network again from scratch.

Why does my network still not work after the reset?

If the reset didn’t fix the issue, the problem might be with your router, modem, or ISP. Try connecting another device to the same network. If that works, the issue is with your PC’s hardware (like a faulty Wi-Fi card) or drivers. If not, contact your internet service provider.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →