A computer on a stick is a complete personal computer built into a housing about the size of a large USB flash drive. You plug it into an HDMI port on a TV or monitor, connect a keyboard and mouse, and it runs a full operating system like Windows or Linux. It turns any display into a desktop computer, letting you browse the web, stream video, and run office software.
Formula
The calculator above estimates the volume of soil, compost, or mulch needed to fill a rectangular area to a given depth. The formula is:
Volume (yd³) = Length (ft) × Width (ft) × Depth (in) ÷ 324
Variables:
- L – length of the area in feet
- W – width of the area in feet
- D – depth of the material in inches
The constant 324 comes from converting cubic feet to cubic yards: 1 yd³ = 27 ft³, and depth in inches ÷ 12 = depth in feet, so 27 × 12 = 324. The second output shows the volume in cubic feet using the simpler formula L × W × D ÷ 12.
Worked Example
Using the default values (L=40 ft, W=25 ft, D=3 in):
- Convert depth to feet: 3 in ÷ 12 = 0.25 ft
- Calculate cubic feet: 40 × 25 × 0.25 = 250 ft³
- Convert to cubic yards: 250 ÷ 27 = 9.26 yd³ (rounded to 2 decimals)
The calculator’s first output shows 9.26 yd³, matching the manual calculation.
When to Use This Calculator
Use this calculator when planning a landscaping project that involves filling a rectangular bed, leveling a lawn area, or adding a layer of topsoil. It works for any material sold by volume, such as soil, compost, mulch, or gravel. Enter the dimensions of the area and the depth you want, and the calculator gives you the volume in both cubic yards (the unit most bulk suppliers use) and cubic feet (handy for bagged products).
For circular beds or irregular shapes, you’ll need a different formula. For a circle, use π × r² × depth, then divide by 324 for cubic yards.
How to Read the Results
The first number, cubic yards, is what you order from a bulk landscape supplier. The second, cubic feet, helps when buying bagged material. For example, if you need 250 ft³ and bags hold 2 ft³ each, you’d need 125 bags. Since you can’t buy a fraction of a bag, round up to the next whole bag.
If you’re ordering a truckload, note that delivery trucks typically carry 10–18 cubic yards, so your 9.26 yd³ order would fit in one small truck. If your project is larger, consider ordering in stages.
Common Mistakes
- Mixing units: Measure length and width in feet, depth in inches. If you measure in meters, convert to feet first (1 m = 3.281 ft).
- Forgetting to divide by 324: Some people use 27 (cubic feet per yard) without converting inches, which gives a result 12 times too large.
- Rounding too early: Keep full precision until the final step to avoid errors.
- Ignoring compaction: Soil settles after watering. Order 10-15% extra if you need the final surface to be exactly level.
Limitations of the Formula
This formula assumes a perfectly rectangular area with uniform depth. Real lawns have slopes, curves, and existing vegetation that affect the true volume. It also doesn’t account for soil compaction, which can reduce volume by 10-20% after settling. For large projects, it’s wise to have a professional measure the site, especially if you’re ordering hundreds of cubic yards.
Also, the calculator only computes volume. It doesn’t tell you the weight, which depends on moisture content and material type. A cubic yard of dry topsoil weighs about 1,000-1,200 lbs, but wet soil can be much heavier. Check with your supplier for weight if you have concerns about truck capacity or manual handling.
Frequently Asked Questions
How many bags of mulch do I need for a 10×10 ft bed at 2 inches deep?
Enter L=10, W=10, D=2. The volume is 10×10×2÷324 = 0.62 yd³, which is about 16.7 ft³. If using 2 ft³ bags, you’d need 9 bags (round up from 8.35).
Should I order more than the calculator shows?
Yes, for most projects. Soil and mulch compact and settle, and you may need extra to fill low spots after leveling. Adding 10% is a common practice. For a 9.26 yd³ order, that would be about 10.2 yd³.
Can I use this calculator for gravel or sand?
Yes, the volume calculation is the same. However, gravel and sand don’t compact as much as soil, so you may not need extra. Still, order a small surplus (5%) to account for spillage and uneven spreading.
What if my area is not a perfect rectangle?
Break it into rectangles, calculate each, and add the volumes. For a triangle, use 0.5 × base × height × depth. For a circle, use π × r² × depth. The calculator here works for each rectangular section.
How deep should I make a raised garden bed?
For most vegetables, 12 inches is the minimum. Root crops like carrots need 12-18 inches. If the bed sits on grass, you may want more depth to prevent weeds from pushing through. Use that depth in the calculator.
Does the calculator account for the slope of my yard?
No. The formula assumes a flat surface. If your yard slopes, you’ll need to estimate the average depth across the slope. For steep slopes, consider terracing or consult a landscaper.
Related
Formula used
in l | Lawn length | ft | 40 | 0 | 100000 in w | Lawn width | ft | 25 | 0 | 100000 in d | Depth | in | 3 | 0 | 120 out yd | Volume | yd³ | l * w * d / 324 | 2 out ft3 | Volume | ft³ | l * w * d / 12 | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More in this bed
- How to Recover Photos from a Water Damaged iPhone 6s
- How to Backup Android Contacts to PC
- How to Log Out of Discord on Desktop & Mobile
- How to Install an M.2 SSD: Step-by-Step Guide
- Fix HP Accelerometer Not Working on Windows
- Repair Disk Errors Windows 11: Step-by-Step