Error 0x800700df, which translates to “The file size exceeds the limit allowed and cannot be saved,” typically appears when copying, moving, or saving a file that is larger than the destination file system or software can handle. The fix is to either compress the file, split it into smaller parts, or copy it to a file system that supports larger files, such as NTFS instead of FAT32.
What Causes Error 0x800700df?
This error is most commonly triggered by a file size limit imposed by the FAT32 file system, which caps individual files at 4 GB (actually 4,294,967,295 bytes). When you try to copy a file larger than this to a FAT32-formatted drive (like many USB flash drives or SD cards), Windows throws error 0x800700df. Other causes include:
- Software with built-in size limits, such as older versions of archiving tools or virtual machine disk images.
- Corrupted system files or outdated drivers that interfere with file operations.
- Antivirus or security software that incorrectly blocks large file transfers.
- Network share or cloud sync client restrictions that cap file size.
How to Check Your File System and File Size
Before attempting fixes, confirm the file system of the destination drive and the size of the file you’re transferring.
- Open File Explorer and right-click the destination drive (e.g., USB drive).
- Select “Properties” and look under the “General” tab for the “File system” line (e.g., FAT32, NTFS, exFAT).
- Right-click the file you’re copying and select “Properties” to see its exact size.
- If the file is over 4 GB and the destination is FAT32, that’s your problem.
Fix 1: Reformat the Drive to exFAT or NTFS
The most direct solution is to reformat the destination drive to a file system that supports large files. exFAT is ideal for USB drives and SD cards because it works with both Windows and macOS, while NTFS is better for drives used only with Windows (and supports file permissions).
- Back up any data on the drive—formatting erases everything.
- Right-click the drive in File Explorer and choose “Format.”
- Under “File system,” select “exFAT” (or “NTFS” if you prefer).
- Check “Quick Format” and click “Start.”
- After formatting, copy the file again.
Note that reformatting will wipe the drive, so only do this if you don’t need the existing data or have backed it up.
Fix 2: Split or Compress the File
If you cannot reformat the drive (e.g., it contains other important files), you can split the large file into smaller parts or compress it.
- Split using archive software: Tools like 7-Zip or WinRAR can split a file into volumes. For example, in 7-Zip, right-click the file, select “Add to archive,” and under “Split to volumes, bytes” enter “4000M” to create 4 GB chunks.
- Compress the file: If the file compresses well (e.g., a video or database), zipping it might bring it under 4 GB. Right-click the file, select “Send to > Compressed (zipped) folder.”
- Use a file splitter: There are dedicated utilities like GSplit that split any file into custom-sized parts.
After splitting, you’ll need to rejoin the parts on the destination computer—most archive tools can do this automatically.
Fix 3: Check for Software or Driver Issues
If the file system is not the issue (e.g., you’re copying to an NTFS drive), the error may stem from software or driver problems.
- Run Windows Update: Ensure your system is up to date, as patches often fix file-handling bugs.
- Update storage drivers: Open Device Manager, expand “Disk drives,” right-click your drive, and choose “Update driver.”
- Disable antivirus temporarily: Some security suites interfere with large file transfers. Pause real-time protection and try again.
- Use Check Disk: Open Command Prompt as administrator and run
chkdsk /fon the drive to repair file system errors. - Copy in smaller batches: If copying a folder, try copying individual files to isolate the problem.
Fix 4: Use Command Line to Copy
Sometimes the built-in copy dialog fails, but the command line works. Open Command Prompt as administrator and use robocopy or xcopy.
robocopy "C:\source\folder" "D:\destination" "filename.iso" /J
The /J flag uses unbuffered I/O, which can bypass certain file size issues. For a single file, copy also works: copy "C:\bigfile.iso" "D:\".
Frequently Asked Questions
Can I copy a 5 GB file to a FAT32 USB drive?
No. FAT32 has a hard limit of 4 GB per file. You must either reformat to exFAT or NTFS, or split the file.
Does error 0x800700df also appear on NTFS drives?
It can, but it’s rare. NTFS supports files up to 16 TB (with larger cluster sizes), so the error usually points to software limits or corruption. Try updating drivers or using command-line copy.
Will reformatting my USB drive erase data?
Yes, formatting erases all data on the drive. Always back up before formatting.
Is exFAT better than NTFS for USB drives?
For cross-platform use (Windows and Mac), exFAT is better because macOS can read NTFS only with extra software. For Windows-only, NTFS offers better security and compression.
How do I split a file without installing software?
Windows doesn’t have a built-in file splitter. You can use fsutil to create sparse files but that’s complex. Simpler: use a free tool like 7-Zip, or compress with Windows’ built-in zip—but zip doesn’t split. You can also use a script with PowerShell to split binary files.
Why does my cloud sync show this error?
Some cloud services (like older Dropbox plans) had file size limits. Check the service’s current limits; if the file exceeds them, you’ll need to compress or split it before uploading.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Hogwarts Legacy Microsoft Visual C Runtime Error Fix
- Set Up UPI Payments Through WhatsApp
- Pair Oppo Enco Earbuds with Android, iPhone & Windows
- Fix Administrator Account Disabled Error in Windows 11
- How to Play Kodi on Smart TV from PC
- Factory Reset on Samsung Galaxy: What It Erases