sodcalculator

10 Tech How-To

Fix Always On Display Not Working on Android

Guide 10-54837 · Updated · Step by step

The fastest fix for an Always On Display (AOD) that stopped working is to check the phone’s battery saver settings—most Android phones automatically disable AOD when battery saver kicks in. If that doesn’t solve it, a simple cache clear of the System UI or AOD app usually restores the feature. This guide walks through all the reliable fixes, from the most common to the more advanced, so you can get the clock and notifications back on your lock screen.

What to Look For

When troubleshooting AOD, the criteria that actually matter are:

  • Battery Saver Interference: The #1 cause. AOD is almost always disabled when battery saver is on, either manually or automatically.
  • Display Settings: Some phones have a schedule for AOD (e.g., only at night) or a timeout that turns it off after a few seconds.
  • Software Glitches: A recent update or a hung background process can break AOD. A restart or cache clear fixes this.
  • Hardware/Proximity Sensor: If the phone is in a pocket or face-down, the sensor disables AOD to save power. A dirty or faulty sensor can keep it off.
  • App Conflicts: Third-party launchers or battery optimization apps can override AOD settings.

1. Check Battery Saver and Power Settings

This is the most common culprit. Go to Settings > Battery and see if Battery Saver is on. If it is, turn it off or add AOD to the list of apps that are allowed to run in the background. On Samsung phones, check Settings > Battery and device care > Battery > Background usage limits—make sure AOD isn’t in the “Sleeping apps” list. Also check if AOD is set to turn on only during specific hours under Settings > Lock screen > Always On Display > Show always vs. “As scheduled.”

Strengths: Fixes the issue without any risk. Trade-offs: If you rely on battery saver, you may need to keep AOD off or accept the battery drain. Best for: Most users, especially those who noticed AOD stopped after a low-battery warning.

2. Restart Your Phone

A simple restart clears temporary glitches that can disable AOD. Press and hold the power button, tap Restart, and wait for the phone to boot. This is the second fastest fix and costs nothing.

Strengths: Quick, safe, and often resolves the issue. Trade-offs: None, but it may not fix a persistent setting conflict. Best for: Anyone whose AOD worked earlier but stopped suddenly.

3. Clear the Cache of System UI or AOD App

If a restart doesn’t help, go to Settings > Apps and look for “Always On Display” (or “System UI” on some phones). Tap Storage > Clear Cache. Do not clear data—that may reset your AOD preferences. On Samsung, the app is called “AlwaysOnDisplay” (package name com.samsung.android.app.aodservice). On stock Android, it’s part of System UI, so you may need to clear cache for that instead.

Strengths: Fixes corrupted temporary files without losing your settings. Trade-offs: You may need to re-enable AOD after clearing cache. Best for: Users who have tried restarting and still see a black screen.

4. Check Proximity Sensor and Pocket Mode

Most phones disable AOD when the proximity sensor is covered (e.g., in a pocket or when face-down). If you have a screen protector or case that covers the sensor, AOD may never turn on. Test by placing the phone on a flat surface, screen up, and see if AOD appears. Also, check Settings > Display > Proximity sensor or “Pocket mode”—disable it if it’s causing issues.

Strengths: Addresses a hardware-related cause that software fixes miss. Trade-offs: If the sensor is faulty, you may need a repair. Best for: Users with thick cases or screen protectors, or those who notice AOD only fails when the phone is in a pocket.

5. Update or Reinstall the AOD App (Samsung Only)

On Samsung devices, the AOD app can be updated via the Galaxy Store or Play Store. Go to Galaxy Store > Menu > Updates and check for an update. If it’s already updated, try uninstalling updates (Settings > Apps > AlwaysOnDisplay > three-dot menu > Uninstall updates) and then reinstall from the Galaxy Store. This resets the app to a clean state.

Strengths: Fixes bugs introduced by a bad update. Trade-offs: You’ll lose any AOD customizations (clock style, etc.) and need to set them up again. Best for: Samsung users whose AOD broke after a system update.

6. Boot into Safe Mode

Safe Mode disables all third-party apps. If AOD works in Safe Mode, then a downloaded app is interfering. To enter Safe Mode: press and hold the power button, then long-press “Power off” until the Safe Mode prompt appears. Test AOD. If it works, uninstall recently installed apps—especially battery savers, launchers, or screen filter apps. Exit Safe Mode by restarting normally.

Strengths: Isolates the problem to a specific app. Trade-offs: Safe Mode disables all third-party apps, so you can’t use them while testing. Best for: Users who installed a new app shortly before AOD stopped.

How to Choose

Start with the cheapest and least invasive fixes: check battery saver, restart, and clear cache. These solve 80% of cases. If those fail, move to the sensor check and Safe Mode. The only time you should consider a factory reset is if none of the above work—but that’s a last resort because it erases all data. There’s no cost for any of these steps, so budget isn’t a factor. The main trade-off is time vs. data loss: a factory reset takes 30 minutes and wipes everything, while Safe Mode takes 5 minutes and is non-destructive. If you’re on a Samsung, the app-specific fixes (update/reinstall) are more likely to help than on stock Android, where the System UI cache clear is more relevant.

Frequently Asked Questions

Why did my Always On Display stop working after the latest update?

Updates can change default settings or introduce bugs. Check if AOD is still enabled in settings, and if so, clear the cache of the AOD app or System UI. If the problem persists, report it to the manufacturer.

Does Always On Display drain battery?

Yes, but typically only 1-2% per hour on OLED screens. If you’re seeing higher drain, check that AOD is set to “Show always” rather than “Show when notifications arrive”—the latter wakes the display more often.

Can a screen protector block the proximity sensor and disable AOD?

Yes. If the protector covers the sensor (usually near the top of the screen), AOD may not activate. Remove the protector and test, or adjust the sensor position in settings if available.

Why is AOD not working when the phone is flat on a table?

Some phones have a “Lift to wake” or “Pocket mode” that overrides AOD. Check display settings for any motion-based toggles. Also, ensure the phone isn’t in battery saver mode.

Will a factory reset fix AOD?

It can, if a software conflict is the cause. But it’s a drastic step. Try all other fixes first, and back up your data before resetting.

Bottom Line

For most people, the fix is turning off battery saver or clearing the AOD app’s cache. If that doesn’t work, work through the steps in order: restart, sensor check, Safe Mode. Only consider a factory reset as a last resort. The key is to be patient and test AOD after each step—you’ll likely find the culprit within 10 minutes.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →