If your Mac shows a “SMART Hard Disk Error” alert, it means the drive’s built-in self-test has detected a potential failure, and the only true fix is to back up your data and replace the drive. However, you can temporarily bypass the warning to access files and continue using the Mac while you prepare, using Terminal commands or third-party tools, but this does not repair the underlying hardware issue.
What the SMART Error Actually Means
SMART (Self-Monitoring, Analysis and Reporting Technology) is a system built into hard drives and SSDs that tracks metrics like reallocated sectors, spin-up time, and temperature. When the drive’s firmware detects values outside safe thresholds, it sets a failure flag. macOS reads this flag and shows the warning in System Information and as a pop-up at startup.
The alert is not a suggestion—it indicates the drive is statistically likely to fail soon. The exact failure could be mechanical (for HDDs), NAND wear (for SSDs), or a controller issue. Ignoring it risks sudden data loss, but the drive may still work for days or months.
Why You Might Want to Bypass the Warning
There are legitimate reasons to temporarily dismiss the alert:
- You need to recover files before replacing the drive.
- The drive is an external backup or secondary storage and you want to use it until a replacement arrives.
- You believe the warning is a false positive (rare but possible after a firmware update or power surge).
- You are using a Mac with a non-Apple drive that reports SMART data differently.
Bypassing does not stop the drive from failing; it only hides the message so you can keep working.
Method 1: Use Terminal to Disable the SMART Check
For internal drives, you can disable the SMART monitoring that triggers the alert. This works on macOS versions that allow the kext (kernel extension) to be unloaded. Note: on newer macOS (10.15+), system integrity protection may block this, and you’ll need to boot into Recovery and disable SIP first—a security trade-off.
- Open Terminal (in /Applications/Utilities).
- Type
sudo kextunload /System/Library/Extensions/IOStorageFamily.kext/Contents/PlugIns/AppleSMARTLib.pluginand press Enter. - Enter your admin password when prompted.
- Restart your Mac. The SMART alert should no longer appear.
To re-enable, use sudo kextload with the same path. This method is temporary and resets after a reboot unless you also prevent the kext from loading at startup (which requires modifying boot arguments—advanced and risky).
Method 2: Use Third-Party SMART Utility
Utilities like DriveDx or Smart Reporter can read and, in some cases, reset the SMART status on external drives. These apps often have a “disable alert” or “ignore” feature. However, they do not clear the internal flag permanently; they just stop the macOS notification from appearing.
For external drives, you can also try unplugging and reconnecting, or using a different USB port—sometimes the connection triggers a false alert. If the drive is in an enclosure, try connecting it directly via SATA if possible.
Risks and Warnings: What You Must Know
Bypassing the SMART error is a stopgap, not a cure. The drive can fail at any moment, so you should:
- Immediately back up all important data to another drive or cloud service.
- Do not use the drive for critical work or long-term storage.
- Monitor the drive’s health regularly with a SMART reader.
- Expect that the drive may become unreadable without warning.
If the drive is under warranty, check with the manufacturer—they may replace it if SMART flags a failure.
Common Mistakes and Misconceptions
Many users think the SMART error is a software glitch that can be fixed by reformatting. Reformatting does not clear the SMART flag—it only erases data. Similarly, running First Aid in Disk Utility does not repair hardware issues; it only checks the file system.
Another misconception: “SMART error” on a Mac with an SSD is less serious. In fact, SSDs have a limited number of write cycles, and a SMART failure often means the drive is approaching its end of life. Treat it as seriously as an HDD failure.
Some users try to reset the SMART attribute by using terminal commands like smartctl (from smartmontools). This can sometimes clear the alert on certain drives, but it is not reliable and may void warranty. It also does not fix the underlying issue.
When to Replace the Drive vs. Continue Using It
If the drive is your startup disk, replace it immediately after backing up. If it is a secondary or external drive, you can continue using it for non-critical data, but keep a backup. If the SMART error appears on a drive that is still under AppleCare or manufacturer warranty, contact support for a replacement.
If the drive is old (5+ years), it is likely time to retire it. Even if it works, the cost of data recovery after a failure far exceeds the price of a new drive.
Frequently Asked Questions
Can I permanently disable SMART monitoring on my Mac?
Yes, but it requires disabling System Integrity Protection (SIP) and modifying boot arguments, which is complex and leaves your system less secure. It is not recommended for most users.
Will the SMART error go away after I replace the drive?
Yes, if you replace the failing drive with a new one, the alert will not appear because the new drive’s SMART status is healthy.
Does the SMART error mean my Mac is broken?
No, it means the drive is failing. The rest of the Mac is fine; you just need to replace the drive.
Can I use an external drive with a SMART error to store backups?
It is not safe. The drive could fail during a backup, corrupting both the backup and the source data. Use a known-good drive.
Is there a way to recover data from a failing drive before it dies?
Yes, use data recovery software like Disk Drill or PhotoRec, but do so immediately. The longer you wait, the higher the risk of permanent loss.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Create App Shortcuts in Windows 10 Start Menu
- How to Rename a SQL Server Database
- Fix Google Calendar Not Syncing on iPhone
- Fix Skype Microphone Not Working on Windows
- Google Docs Landscape: Change Page Orientation
- Recover Deleted Admin Account in Windows 11