sodcalculator

10 Tech How-To

Discord vs Skype: Key Differences with Table

Tag 10-48666 · Updated · Standard formula, shown below

Volume 9.26 yd³
Volume
250.0 ft³
Result
Lawn length
40 ft
You entered
Lawn width
25 ft
You entered
You enter
Lawn length, Lawn width, Depth
You get
Volume, Volume
Rounding
2 dp · 1 dp

Discord and Skype are both popular communication platforms, but they serve different primary purposes: Discord is built for community servers and gaming, while Skype is a traditional one-on-one and small-group calling app. The table below summarizes the main differences, followed by a detailed breakdown of features, performance, and use cases.

Formula

This calculator finds the volume of soil, mulch, or other material needed to cover a rectangular lawn to a given depth. The formula is:

Volume (yd³) = Length (ft) × Width (ft) × Depth (in) ÷ 324

Where:

  • Length – the longer side of the area in feet (ft)
  • Width – the shorter side in feet (ft)
  • Depth – how deep you want the material in inches (in)
  • 324 – converts cubic feet to cubic yards (27) and inches to feet (12): 27 × 12 = 324

The second output gives cubic feet directly: Volume (ft³) = Length × Width × Depth ÷ 12

Worked Example

Using the default values from the calculator (length = 40 ft, width = 25 ft, depth = 3 in):

  1. Convert depth to feet: 3 in ÷ 12 = 0.25 ft
  2. Calculate cubic feet: 40 × 25 × 0.25 = 250 ft³
  3. Convert to cubic yards: 250 ÷ 27 = 9.26 yd³ (rounded to 2 decimals)

The calculator shows 9.26 yd³ and 250 ft³ – matching the manual calculation.

When to Use This Calculator

Use this before ordering topsoil, compost, mulch, or fill dirt for a garden bed, new lawn, or landscaping project. It tells you the exact volume to buy, so you don’t over-order (wasting money) or under-order (making a second trip). It also works for calculating the amount of sand for a sandbox or gravel for a path.

For a new lawn, you typically spread 3–4 inches of topsoil. For a flower bed, 6 inches is common. The calculator handles any depth you enter.

How to Read the Results

The first number is the volume in cubic yards – the unit used by most bulk suppliers. The second is in cubic feet, which is handy for bagged material (e.g., a 2 ft³ bag). Compare the result to what a truck or bag delivers:

  • Bulk topsoil is sold by the cubic yard (often with a minimum delivery of 1 yd³).
  • Bagged mulch is usually 2 ft³ per bag – divide the ft³ result by 2 to get the number of bags.

If your result is 9.26 yd³, you’d order 9.5 or 10 yd³ to be safe, depending on supplier policy.

Common Mistakes

  • Mixing units – Entering length in meters but depth in inches gives a wildly wrong answer. Always use feet for length and width, inches for depth.
  • Forgetting to round up – If you buy in whole bags, always round up. 250 ft³ ÷ 2 ft³ per bag = 125 bags exactly, but if the result were 125.3, you’d need 126 bags.
  • Ignoring compaction – Freshly tilled soil settles after watering. Add 10–15% more if you need the final surface to be exactly level after settling.

Limitations of the Formula

This formula assumes a perfectly rectangular area with uniform depth. Real lawns have curves, slopes, and existing vegetation. For irregular shapes, break the area into rectangles and add the volumes together. For slopes, measure depth at the shallow and deep ends and use the average. The formula also assumes the material is loose and not compacted – if you’re filling a hole that needs tamping, you’ll need extra.

Frequently Asked Questions

How many cubic feet are in a cubic yard?

There are 27 cubic feet in 1 cubic yard (3 ft × 3 ft × 3 ft = 27 ft³). This is why the conversion factor 324 appears in the formula – it combines the 27 with the 12 inches per foot.

What if my lawn isn’t a perfect rectangle?

Divide the area into rectangles (or triangles) and calculate each separately, then add the volumes. For a triangle, use (base × height × depth) ÷ 2 for the volume in cubic feet, then convert to cubic yards.

Should I order more than the calculator says?

Yes, it’s wise to add 5–10% for waste, spillage, and settling, especially if you’re using a wheelbarrow and spreading by hand. For large projects, ordering a little extra avoids a second delivery fee.

Can I use this for sand or gravel?

Absolutely. The formula works for any loose material – topsoil, compost, sand, gravel, or mulch. Just adjust the depth to your project’s needs.

How deep should I make a new lawn?

For a new lawn from seed or sod, 3–4 inches of good topsoil is typical. If you’re amending poor soil, mix in 2–3 inches of compost. This calculator lets you try different depths to see how the volume changes.

What if I need the volume in liters or cubic meters?

Convert the cubic feet result: 1 ft³ = 0.02832 m³, and 1 m³ = 1000 liters. For example, 250 ft³ × 0.02832 = 7.08 m³, or 7,080 liters.

Related

Formula used
in l | Lawn length | ft | 40 | 0 | 100000
in w | Lawn width | ft | 25 | 0 | 100000
in d | Depth | in | 3 | 0 | 120
out yd | Volume | yd³ | l * w * d / 324 | 2
out ft3 | Volume | ft³ | l * w * d / 12 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More in this bed

The whole Tech How-To bed →