sodcalculator

10 Tech How-To

CS vs CE Jobs: Key Differences

Tag 10-46499 · Updated · Standard formula, shown below

Volume 9.26 yd³
Volume
250.0 ft³
Result
Lawn length
40 ft
You entered
Lawn width
25 ft
You entered
You enter
Lawn length, Lawn width, Depth
You get
Volume, Volume
Rounding
2 dp · 1 dp

Computer science (CS) and computer engineering (CE) lead to different job markets: CS graduates typically fill software development, data, and systems roles, while CE graduates fill hardware, firmware, and embedded systems roles. The core difference is that CS focuses on software theory and algorithms, whereas CE blends computer science with electrical engineering to build physical computing systems.

Formula

The calculator above estimates the volume of material (soil, mulch, sand, or compost) needed to cover a rectangular area to a given depth. The formula is:

Volume (yd³) = (Length × Width × Depth) / 324

Where:

  • Length – the length of the area in feet (ft)
  • Width – the width of the area in feet (ft)
  • Depth – the desired depth of material in inches (in)
  • 324 – conversion factor: 1 cubic yard = 27 cubic feet, and 1 foot = 12 inches, so 27 × 12 = 324

The second output shows the volume in cubic feet, using the formula: Volume (ft³) = (Length × Width × Depth) / 12.

Worked Example

Using the default values from the calculator (Length = 40 ft, Width = 25 ft, Depth = 3 in):

  1. First, calculate the volume in cubic feet: 40 × 25 × 3 / 12 = 3000 / 12 = 250 ft³
  2. Then convert to cubic yards: 250 / 27 = 9.259 yd³

The calculator rounds to 2 decimal places, giving 9.26 yd³ and 250 ft³.

When to Use This Calculator

Use this calculator when you need to order bulk material for a landscaping or construction project. Typical scenarios include:

  • Laying a new lawn – you need a few inches of topsoil for grass seed or sod.
  • Building a raised garden bed – you need to fill it with soil mix.
  • Spreading mulch or gravel – you need to know how much to buy.

Suppliers sell these materials by the cubic yard (or cubic meter in metric regions), so knowing the volume helps you order the right amount.

How to Read the Result

The main result is the volume in cubic yards. If you order from a bulk supplier, you will ask for this number (rounded up to the nearest whole yard, since they deliver in whole yards). The cubic feet figure is useful for smaller projects or when comparing bagged material (which is usually sold in cubic feet).

For example, if you need 9.26 yd³, you would order 10 yd³ from a delivery service. If you are buying 2-cubic-foot bags, you would need 250 / 2 = 125 bags.

Common Mistakes and Unit Mix-Ups

The most frequent error is mixing units. The calculator expects length and width in feet, and depth in inches. If you measure in meters or centimeters, convert first:

  • 1 meter = 3.28084 feet
  • 1 inch = 2.54 cm

Another mistake is forgetting that a cubic yard is 27 cubic feet, not 3. The conversion factor 324 in the formula accounts for both the 12 inches per foot and the 27 cubic feet per yard.

Also, remember that the calculator gives the volume of material needed to fill the space exactly. In practice, you may want to order a little extra (5–10%) to account for compaction, settling, or uneven ground.

Limitations of the Formula

This formula assumes a perfectly rectangular area with a uniform depth. Real landscapes have slopes, curves, and irregular shapes. For such areas, divide the space into smaller rectangles, calculate each, and add them together. The formula also does not account for material compaction – soil and sand settle over time, so you may need more than the calculated volume.

For very large projects, it is wise to confirm your calculations with the supplier, as they often have experience with local soil conditions.

Frequently Asked Questions

How many cubic feet are in a cubic yard?

There are 27 cubic feet in a cubic yard (3 feet × 3 feet × 3 feet). That is why the formula divides by 27 after converting depth to feet.

Can I use this calculator for circular areas?

No, this calculator is for rectangular areas only. For a circular area, use the formula for the area of a circle (π × radius²) times the depth, then convert to cubic yards.

What depth of topsoil do I need for a new lawn?

For most grass types, 4–6 inches of topsoil is recommended. If you are laying sod, 3–4 inches is often enough. Check with your local nursery or extension service for specific recommendations.

How many bags of mulch do I need?

Bags typically contain 2 cubic feet. Divide the total cubic feet you need by 2 to get the number of bags. For example, 250 ft³ ÷ 2 = 125 bags.

Should I round up or down when ordering?

Always round up to the nearest whole cubic yard when ordering bulk material. This ensures you have enough, and most suppliers charge for the full yard even if you only need a fraction.

Related

Formula used
in l | Lawn length | ft | 40 | 0 | 100000
in w | Lawn width | ft | 25 | 0 | 100000
in d | Depth | in | 3 | 0 | 120
out yd | Volume | yd³ | l * w * d / 324 | 2
out ft3 | Volume | ft³ | l * w * d / 12 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More in this bed

The whole Tech How-To bed →